PW50 Full FMF Exhaust install and Comparison
Вставка
- Опубліковано 24 лип 2024
- In this video I install the full FMF exhaust. I show the steps on how to remove the exhaust, and install the FMF Fatty pipe, and FMF Powercore 2 silencer. At the end of the video I do a comparison from the Stock exhaust to the FMF exhaust. Remember I have this bike already modded up with the Oil Pump Delete, Boysen Reeds, 60cc Big Bore Kit, and also a Uni Air Filter installed. For all those videos be sure to check out my channel. For future videos be sure to hit that Like button, and SUBSCRIBE!. Thanks for Watching!
Uni Filter Clamp-On Pod Filter Single Stage - UP-4112
FMF Racing Fatty Pipe - 024023
FMF Racing PowerCore Silencer - 024036 - Авто та транспорт
Awesome job on that PW50. Thanks for building such an awesome bike for your son. Need more dads like you.
Thanks for the feedback. Hopefully my vids were helpful for you. Cheers.
@@bigair0176 you're welcome and it was definitely enjoyable.
This is as close to a real factory PWEE as I’ve seen ! Great work
Thanks man. Appreciate your feedback. Cheers!
I’ve just completed my sons 1983 PW60 build. Picked up a cheap bike and basically followed what you have done except the exhaust. Boyesen reeds, Niche 60cc kit, all new electrical components, rebuilt stock carb but left the ‘65’ jet. Going to order up that unifilter because the air box sucks to take in and out. Fired it up for first time tonight and ran a few heat cycles through the engine for break in. Hope to get it on the trail tomorrow.
Nice. Glad my vids were helpful. Cheers
how is your niche 60cc running? mine is having a weird knocking noise coming from the cylinder head. Any idea what it could be?
**big bore 60cc kit
Ooooh wee love the sound
Ya it sounds sweet. Cheers!
Just ordered this for my 4 year old's PW.
Nice. I loved how it sounded. Just wish the Covid times would have made it easier to get parts and the youngest didn’t out grow it so quick. Cheers!
Still got mine from 1980 also my pw80. But the colors are red and white. Greetings from Holland
Greetings! Nice. Cheers!
Insane they even make that pipe for a 50cc bike.
Ya it sounds sick. Can’t wait for him to try it out and see how much better it runs for him. Cheers
That sounds heaps cooler
Yea sounds like a strong 2 stroke for sure. Cheers!
Would love to see you put an fmf on the pw80 mate. Looks great on this 50
I would love to be able to order them lol. I have been holding off on my rebuild of my sons pw80 cause I haven’t been able to order them. I may do my sons top end this weekend on the pw80. If you haven’t seen them yet I have a few vids on the pw80 on my channel.
Chromed steel not polished stainless mate. Sounds awesome 👍🏽👍🏽
Yea it ran awesome!...cheers
Nice work and good video. Maybe I missed it, but wondering how much power gain you got out of this.
Certainly minimal. It did feel more responsive but I never really got a chance to ride it. The 60cc cylinder definitely increased power. But as for the exhaust it just felt not as restrictive.
@@bigair0176 good to know, thanks! I’m tempted to buy one for my daughter’s PW, but I’m sure the money could be spent in much better places, such as saving up for a bike for a littlest guy.
@@JMKGarage sounded sweet tho! It will help lean out air fuel which will give it that snappier feeling. I would try a better filter and lower main jet. I heard a 65 main really helps leaning it out.
Hey man cool video. I have the same year pw50. Where did you buy you're plastics? I'm trying to buy the original yellow ones for my Bike .Has been a bit difficult to find the correct ones. Thanks .
Amazon. They were a knock off. Try partzilla they may have some in stock.
@@bigair0176 thanks for the reply man. Very humble of you getting back at me. Will check out that site. ✌️
Just curious where you ride (kid places) I think we live on tye same island. Been looking for good places to ride with my son on his PW without needing to go to a track.
Actually, when i found your channel, right away I could tell your Canadian and that you lived on the West Coast.
I used to take the boy to the pit just below the wastelands. It’s Farley open. Has some hills and is easy to get to. Cheers!
Your going to have to put that heat shield on I bet. Especially if the kid drops the bike on his leg on that side. He will be burt for sure
I will have to see. He wears riding boots so I will have to fix the guard to make it looks and fit ok. And repaint it too. But thanks for the feedback!
will fmf exhaust improve a kx50 2006?
It will certainly open it up. As for power it will be minimal. It sounds way better that’s for sure!
What jet size and carb settings are you at? Sounds great.
They are the stock size jets. These bike run rich stock so it only made sense to open up the bike with an exhaust and air filter to combat that. Cheers!
I was gunna ask the same thing!!
Iv done the same mods but my 60cc kit makes a tinging noise but runs mint
Ya I think it’s just the exhaust personally. Unless it’s overbearing then I would be concerned. But even in my vid you can hear a bit of ringing compared to the stock one. I am so happy with how the bike runs compared to how I purchased it. I’ve put so much work into it. It will be a shame to let go one day. Cheers!
I have the same tinging/knocking noise coming from my 60cc kit as well. Did you find a fix?
Where did you get the fmf ? Thanks
I got the fatty pipe from fortnine and the silencer from my local dealership.
We’re did you get the front pipe from please
Fort nine
11:40 How much you selling it for?
Love all the mods
Pipe/silencer look and sound awesome
I love how the bike is from 1983 and looks like a 2023!
It’s remarkable that they haven’t changed anything since 1983 … the year I was born.. started on a zinger myself it was yellow and black could have been an ‘83 haha
My son is 3
he’s just big enough for the pw but he’ll out grow that thing quiiick
He’s been riding stacyc since he was 2 haha now he’s asking for a gas bike like pop’s bike 02 yz125
He rides on it with me
We might pick up a 2002 pw 50 today actually which would match my 02 yammy perfect
We have a ktm sx-e 5 for my older son(skipped the gas stage besides a few rides on a stock zinger)
Now it’s time for a 65 briefly until 85 size.. he needs to learn gas and gears
I think electric power is going to elevate our sport tho
We just need better battery tech
Thanks for sharing
Raydio ⚡️
Haha awesome! Yea sold it for 1800$cdn. Both my boys loved it
Hey I have a question? For the owner of the pw it’s about the pw
Ok?? Where is your question there?
How much did u sell it for after all that u done to it
@@bigair0176 sir !
@@kingofotfnuski4794 I think it sold for 1800. Been a while so can’t quite remember
Holy bent rear wheel huh? dangerous!
Ya it’s been bent since I bought it. Doesn’t seem to effect it to much. It’s not like he gets up 100kmh and the jiro takes over.
You never showed what it ran like with the new pipe!
I guess you didn’t watch to the end then
Haha i did!! The bike looks awesome too btw!!! But when is it shown riding with the new pipe? What time? I didnt see it twice now
Oh ya sorry kid already outgrew it by time. I was able to get the pipe. Took 6 months. Already sold the bike. Ran good tho.