How To Rebuild the Carburetor on a Yamaha PW50

Поділитися
Вставка

КОМЕНТАРІ • 24

  • @rmatvmc
    @rmatvmc  Рік тому +4

    Check out the Yamaha PW50 Headquarters here: rmatvmc.link/pw50-carb-rebuild

  • @816Pitbike
    @816Pitbike Рік тому +6

    Awesome Vid! Now I can fix my PW50

  • @tackleberry933
    @tackleberry933 Рік тому +2

    Nice video a little more in-depth than what’s on UA-cam

    • @rmatvmc
      @rmatvmc  Рік тому +1

      Thank you! Glad it was helpful.

  • @aklaunch
    @aklaunch Рік тому +1

    Thank you for your videos. It is always the details. And you always cover those.

  • @HZKMFF
    @HZKMFF 2 місяці тому

    Very nice it worked out 👍 keep it up

  • @Chadmueller-m8b
    @Chadmueller-m8b Рік тому +1

    Do you have to bleed the oil line when you reconnect it? If not, how come?

  • @lelandcamara7491
    @lelandcamara7491 Рік тому

    Can you do a video on the throttle and choke, set up i feel like it’s confusing

  • @longranger308
    @longranger308 5 місяців тому

    Can you remove the pin holder that orientates the throttle plunger?

  • @entropy5125
    @entropy5125 Рік тому +2

    Do a kx100 woods build.

  • @Mrtimmo92
    @Mrtimmo92 10 місяців тому +1

    Thank u, nice video

  • @kevinbailey7052
    @kevinbailey7052 Рік тому

    Is this good for only the past few years or will this carb work on an early 2000s model as well

    • @rmatvmc
      @rmatvmc  Рік тому

      There have been small changes but this carburetor has been largely the same since this bike came out in 1981.

  • @marcussmith4149
    @marcussmith4149 Рік тому

    Why are you not removing the idle screw?

  • @Dirtbikecentral871
    @Dirtbikecentral871 Рік тому

    I just replace my carburetor with the qa parts one and I just can’t get it to run right I put a new throttle cable at the same time the bike only runs at full throttle and barely so at that any tips will help

    • @rmatvmc
      @rmatvmc  Рік тому +1

      Hmm, is the throttle stuck open? I'd recommend pulling the air box off and verifying that the slide is sitting all the way down in the carburetor body. It might need some adjustment with the throttle cable/idle adjuster. Let me know what you see and we'll go from there. -Charles

    • @Dirtbikecentral871
      @Dirtbikecentral871 Рік тому +1

      @@rmatvmc I think I got it figured out. I believe I got a defective carb. The float bowl sits to high I can get it to run a little better with the air screw all the way out but it is no a permanent fix. I spoke with a RM customer service tech and he said QA part’s should contact me tomorrow. The customer service at RM is unmatched in my opinion. I’ve never been left with a defective part.

  • @sazidanecodm2382
    @sazidanecodm2382 Місяць тому

    Where does the red pipe go to?

    • @rmatvmc
      @rmatvmc  Місяць тому

      The red tubing is connected to the drain on the bowl of the carb, and runs down the bike to drain onto the ground.

  • @robertcarlos78
    @robertcarlos78 10 місяців тому

    So you didn’t show how to take that last hose.

    • @rmatvmc
      @rmatvmc  10 місяців тому +1

      That's the line that comes from the oil pump. It doesn't need to be routed anywhere, just remove it from the carburetor when taking it off and hook it back up when going back together.

    • @robertcarlos78
      @robertcarlos78 10 місяців тому

      Thanks the reason I had ask was because on mine the hose don’t have a regular clamp is like crimp on the hose.

  • @drmurphy9219
    @drmurphy9219 Рік тому

    My emulsion tube is stuck 😢

  • @sarawalker1454
    @sarawalker1454 5 місяців тому

    why didnt u start it man