thank you Zach i have second hand tractor that has issues but might send it to Boya machinery the Kubota dealer in Perth there"s a broken z linkage from hand lever to a seized swivel right 3pl top arm....... man my 2016 3350 tractor is beaten up and been misused
We have an older Kabota B7500. We did a transmission oil change along with filter change. We also replaced a few hydraulic lines. Now our three point hitch doesn’t operate, up or down. Our bucket works fine though. We checked that valve below the seat and the lever to the three point hitch they are all are fine. Any ideas?
We've got a M7060 that's been driving through the ocean surf multiple times by operator error. Anyways our three point isn't going down. Our draft control is seized at the side of the transmission case and a position control that moves the linkage but the 3 point doesn't move.
haa haa haa, 30+ years experience with tractors and i forgot about that. let a friend borrow my tractor for about 15 minutes last year, i bet they closed that. just spent almost an hour trying to figure it out, soooo simple i forgot!
My ford 8n lifts but won't go down. Thinking I need to put a scraper blade on it, maybe the weight will help me figure out what's got to happen and when.
my L2900 3 pt hitch would not go down unless it sat overbite. It would then raise properly the next morning. Today it will not raise at all. I have checked oil level but don't know what else to look for. Any help would be greatly appreciated. All other functions on tractor working poperly. IE f ront loader steering etc.
Question! 3Point wont go up or down. Tightened and loosened the adjustment knob several times. Still wont move. (worked a week ago and no problem and nothing has changed). Front Bucket raises and lowers no problem so dont think its a hydraulic problem. HELP! ha ha
Do you have a mower deck installed on the tractor? If so sometimes that rides on the 3 point arms to be raised and lowered and that can snag the 3 point up.
I have a 1994 L4200 kubota i can raise the three point but can not lower it? It will slowly lower over time but takes a while does it have a selecter valve as well
Do you have weight on the 3 point? You often need weight to make it go faster. If you do have weight then you might have a draft control as well as a 3 point control. I would mess with your draft control to see if that helps, it’s potential that valve is stuck and could be slowing the system down. I don’t know much about fixing that, would be best to talk to a mechanic.
After a couple hrs messing about - your vid hit the nail on the head. THANKS!
Glad we could help!
Thank you have a great week.
Thanks so much! Should have known better. You alleviated a lot of anxiety and worry.
Thanks Zach, I’ll look for the knob on my 18 2032r and see if I can get the hitch to go down.
That intro is hilarious! 🤣
Great video, to the point and entertaining as well.
Thank you so much!
Glad to hear it helped!
thank you Zach i have second hand tractor that has issues but might send it to Boya machinery the Kubota dealer in Perth there"s a broken z linkage from hand lever to a seized swivel right 3pl top arm....... man my 2016 3350 tractor is beaten up and been misused
We have an older Kabota B7500. We did a transmission oil change along with filter change. We also replaced a few hydraulic lines. Now our three point hitch doesn’t operate, up or down. Our bucket works fine though. We checked that valve below the seat and the lever to the three point hitch they are all are fine. Any ideas?
We've got a M7060 that's been driving through the ocean surf multiple times by operator error. Anyways our three point isn't going down. Our draft control is seized at the side of the transmission case and a position control that moves the linkage but the 3 point doesn't move.
Dude you just saved the day
haa haa haa, 30+ years experience with tractors and i forgot about that. let a friend borrow my tractor for about 15 minutes last year, i bet they closed that. just spent almost an hour trying to figure it out, soooo simple i forgot!
Thanks buddy!!!
Thank you!!
Thank you
My ford 8n lifts but won't go down. Thinking I need to put a scraper blade on it, maybe the weight will help me figure out what's got to happen and when.
Thanks . I just adjusted my seat !!!! I thought .
my L2900 3 pt hitch would not go down unless it sat overbite. It would then raise properly the next morning. Today it will not raise at all. I have checked oil level but don't know what else to look for. Any help would be greatly appreciated. All other functions on tractor working poperly. IE f
ront loader steering etc.
Good job buddy
Ty your voice helped
Mine will not stay up
Question! 3Point wont go up or down. Tightened and loosened the adjustment knob several times. Still wont move. (worked a week ago and no problem and nothing has changed). Front Bucket raises and lowers no problem so dont think its a hydraulic problem. HELP! ha ha
Do you have a mower deck installed on the tractor? If so sometimes that rides on the 3 point arms to be raised and lowered and that can snag the 3 point up.
@@kubotaoflynchburg no. This is just a box scraper. Used it a week ago. No problem. Tractor is new. Only have about 30 hours
I have a 1994 L4200 kubota i can raise the three point but can not lower it? It will slowly lower over time but takes a while does it have a selecter valve as well
Do you have weight on the 3 point? You often need weight to make it go faster. If you do have weight then you might have a draft control as well as a 3 point control. I would mess with your draft control to see if that helps, it’s potential that valve is stuck and could be slowing the system down. I don’t know much about fixing that, would be best to talk to a mechanic.
Mine will not lower all the way " box blade I'll be about 6" high " as it has before Mahindra 2545 I have about 3 " of/ lift lower
Having the same issue
Dangit
😊Zach 😊
Free Trump from the Swamp