High Idle Troubleshooting

Поділитися
Вставка
  • Опубліковано 14 жов 2024
  • Throttle position sensor High Idle Troubleshooting
    Disclaimer:
    This video is not meant to be a definitive how to.Always consult a professional repair manual before starting your repair.I am not responsible for any problems that you might incur by watching or following this video.Follow at your own risk.

КОМЕНТАРІ • 29

  • @gmarco98248
    @gmarco98248 2 роки тому

    I had the high idle problem on my 99 ford ranger, and sure enough it was the tps sensor.
    Good video well explained 👏

    • @RichpinTv
      @RichpinTv  2 роки тому

      Glad you got it fixed.

  • @mutleysnicker
    @mutleysnicker 5 років тому +1

    Hi all just an FYI went thru a high idle issue on my 1999 ford
    f150---smoked it for vac leaks(yes, i made my own smoker lol) cleaned
    throttle body and Idle control valve--cleared computer and tried to let
    it find it's new base idle---no help--grrrr finally i remembered to
    clean (I mean really clean!!) the pcv valve--Freaking truck calmed down
    and is purring like a kitty!! PCV valve was sticking!! Hope this helps
    all!!

    • @lonniesmith6701
      @lonniesmith6701 3 роки тому

      Thanks, I've replaced Iac, maf and tps, no change. I'll check pvc.

  • @GOPSpinMachineInOD
    @GOPSpinMachineInOD 14 років тому

    Nice old analog Micronita meter. I bought mine at Radio shack in the 70s and it still works great today..made in Japan of course.

  • @RichpinTv
    @RichpinTv  14 років тому

    @VMATT500C Yes it would, i was using the most sensitive setting on the meter i had.

  • @RichpinTv
    @RichpinTv  14 років тому

    @RvLanee The red one i have is a Craftsman 82082

  • @RichpinTv
    @RichpinTv  11 років тому

    With a carburetor it could be the idle screw or the fast idle which is connecter to the choke or possible a vacuum leak.

  • @RichpinTv
    @RichpinTv  13 років тому

    @1991darkmage It could be the tps but i would try cleaning the throttle body and idle air control valve first.

  • @1991darkmage
    @1991darkmage 13 років тому +1

    in my 99 saturn sl1, when im driving and i disengage my clutch the rpm's go up to about 1700 rpm and stays that way until im at a complete stop, do you think this is from the tps?

  • @MrMDee-si1bz
    @MrMDee-si1bz 6 років тому

    I have a 2003 Pontiac Montana, and it has that "High Idle problem! I replace the Air Idle motor"! It'll last for some over a week and half, but It'll come down to the same High Idle! Any suggestions?

  • @datgirl404
    @datgirl404 5 років тому +1

    vibe , high idling replaced tps still idling high?

  • @hqn12
    @hqn12 11 років тому

    Hi Rich, can this TPS be cleaned out so that the bad connections make contact? perhaps using electrical connector cleaner?

  • @jmb-bj9gs
    @jmb-bj9gs 7 років тому

    I have that problem driving on highway , take foot off gas , and it seems the idle gets stuck ,and increases , not all the time ,but often, I tested it w multimeter with it hooked up to tb. It's a digital one and I manually moved the throttle up and down and watched the numbers, they increased and decreased nice and evenly, so should I look at iacv? Would problems w that be indicative of that high stuck idle like you mentioned?? Thanks

  • @pedromata7364
    @pedromata7364 11 років тому

    Did you ever get it fixed? My car is an SVT ford focus and does the exact same thing. I think it's weird since it idles back to normal ONLY AFTER I stop. Did you get your problem fixed?

  • @RichpinTv
    @RichpinTv  11 років тому

    Replaced the TPS and everything was back to normal.

  • @bellevernon15012
    @bellevernon15012 10 років тому

    I have a 3.8 1982 buick regal. Has high idel at start then comes down but wehen I put it in drive or reverse it wants to stall. also if driving and i give it some gas it wants to stall at first then gos. Is this a bad TPS? I have new oil,plugs,wires,fuel filter, egr valve.

    • @RichpinTv
      @RichpinTv  10 років тому

      I think i would first do a check for a vacuum leak then go to the idle air control.

    • @RichpinTv
      @RichpinTv  10 років тому

      richpin06a
      How many volts are you getting at the TPS.

  • @RichpinTv
    @RichpinTv  11 років тому

    The TPS can not be cleaned that i know of.

  • @jackofalltrades5904
    @jackofalltrades5904 Рік тому

    I need help....can you assist me please

  • @rayday007
    @rayday007 Рік тому

    My issue was the mass flow air sensor

  • @1991darkmage
    @1991darkmage 11 років тому

    sry for late response. i have not fixed the issue. i just gave up on trying to fix it.sry for not having an answer for you, i wish i did its super annoying

    • @lloydmukwindidza5192
      @lloydmukwindidza5192 5 років тому

      Had a problem with my Toyota Toyoace 2007. It was just a sticky excellerator pedal.

  • @bellevernon15012
    @bellevernon15012 10 років тому

    New TPS is now at 3.5 old one was at 2.7

  • @carslover3509
    @carslover3509 6 років тому

    Man you are sweet

  • @datgirl404
    @datgirl404 5 років тому

    vibe , high idling replaced tps still idling high?

    • @aaronpixler3842
      @aaronpixler3842 5 років тому

      clean the throttle body. high idle also can be a sign a a bad intake manifold or gasket

    • @truelies3690
      @truelies3690 Місяць тому

      CTS will cause higher or high idle too. $15 on eBay.