How to use a slapping file and less bondo.
Вставка
- Опубліковано 29 вер 2024
- During the auto paint and auto body restoration of a chevy truck, I share the techniques I use to flatten out the sail panel using a slapping file. This is a useful tool in order to use less body filler when preparing a project for a new paint job. hope you find this helpful and be sure the channel for more how to tips and techniques for paint and auto body repair.
My amazon affiliate store: Tools and materials categorized to help you find what you're looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video
⬇️⬇️⬇️⬇️⬇️⬇️
coarse slapping file
amzn.to/3Ewtqxh
3m lightweight filler
amzn.to/3VyOMDy
clean sheets mixing board
amzn.to/3rfoeK7
36 roloc Disc
amzn.to/3NLAcoP
astro angle die grinder
amzn.to/3U2plct
3m 800/1000 sanding sponge
amzn.to/3Us4miV
mirka 320grit sandpaper
amzn.to/3T85nMi
mirka 80grit sandpaper
amzn.to/3T85nMi
mirka 180grit sandpaper
amzn.to/3T85nMi
Auto body line marker tool
amzn.to/3sefdAQ
G90e dent puller
amzn.to/3185r9g
flexible med cut body file
amzn.to/3z6PnAT
dolly and hammer kit
amzn.to/3y7Vx28
mirka dustless sanding system
amzn.to/2Y5h2VE
Icing glazing putty
amzn.to/3iPXVG5
astro angle grinder
amzn.to/3FfyO9a
3m Performance paint gun
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
amzn.to/3scqGAf
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
how to save a bad paint job
• How to save a bad pain...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
Hey Chris, sorry again for commenting on an old video buddy but this type of work simply blows me away🤯 I could see the metal getting straighter as you was slapping it down and you made it look so easy, totally admire your skill doing this mate 👏👍
Thank's brother! Appreciate the comment and support!
i love thar primer
Hello again what a good sanding block.....I got the one's from paint store
I use dura block and the flexible block is motor gaurd. You can find links in the description of my videos also a link to my Amazon store. Thank's appreciate the support!
Dig the channel 👌
Wow very good job teaching thank u
Thanks and your welcome
Glad you working on old school car and trucks hate the New junk.
I plan on doing more rescue and restoration project this year .
@@GarageNoise Can't wait....Have old school stuff need to learn the trade here in OKC..thanks
@lewismartin9980 You know, I'm an okie as well. Appreciate the support,
You make look easy. Great video. Thanks
Can you spay primer over guide coat
I'll just tell I am not concerned with removing every little bit of guide coat before I primer. If you are tho just take a red or gray scuff pad and sand it a bit than clean and primer. I'm sure there's a wide range of opinions on this. Appreciate the support!
Thanks
Not really relevant to today's video, but just sprayed some Upol system 20 clear today for the first time. Fast activator. 66 degrees in garage. Iwata W400 lv2 1.3.
So far its looking good. I got a nice clear reflection, 2 coats. Had no issues spraying it. I will see how it looks in a couple days. Still need to do a light wetsand and buff to remove some annoying specs(as usual) but minor. If it buffs out nice, then it's got my thumbs up for a budget priced clear.
I think you'll like howit buffs. I typically buff it the next day with good results. Appreciate the support!
Now another tool I need to buy lol great guide to use this 👏
Question on a different topic, on the 2 part white pearl, why can't you mix the pearl into the white in a different can and spray.
The pearl is translucent so you see the white under the pearl if you were to mix them together the pearl would not have the same effect. Appreciate the comment and support!
Hello! Thank you for the educational video, as always everything is clear. I am waiting for a new video.)
Appreciate the support! I'll keep the video's coming!
hi. what grades would you use to block out the primer? i use the same primer.
320 to start than 600 before sealer or paint.
Nice work wow 👌
Thank you for another great video! Awesome work and skill.
Thank's! Appreciate the comment and support!
Thank for the tutorial I always wanted to learn how to use a slapper properly
No problem appreciate the support!
I like to leave my primer set two to three days to try and give it time to dry out or shrink
If I could I probably would too. Being a collision shop I can only let it sit overnight. Appreciate the support!
Couldn't agree more and had a lot of issues. A good infrared cure lamp like the "Speed Ray" eliminated them. Use it according to TDS and let it sit overnight afterwards if you can. All my shrink and die back issues are gone, and no more letting it sit for days or longer. Chris has one I seen in his other videos.