Trying To Drive Our Mid-Engined Corvette-Powered Pickup For The First Time (FOUND A BIG PROBLEM)
Вставка
- Опубліковано 19 сер 2020
- Subscribe to Wrench Every Day ► bit.ly/2D4iSp8
Follow us on Instagram ► / wrencheveryday
------------------------------------------------------------------------------------------
Today, Jared takes the Johnnie Rev out of the shop and immediately finds an issue. Two steps forward...
Thanks to Randy At GRC!► grcfab?igshid=1...
Thanks to J&J Auto Wrecking! ►www.jandjautowrecking.com/ful...
------------------------------------------------------------------------------------------
Questions? Comments? Business inquiries? Email us at iwrencheveryday@gmail.com
------------------------------------------------------------------------------------------
Twitter ► / wrencheveryday
Instagram ► / wrencheveryday
Tavarish on Social:
Instagram ► / therealtavarish
Facebook ► / asktavarish
Twitter ► / therealtavarish
Jared on Social:
Instagram ► / jaredpink
Twitter ► / thejaredpink - Авто та транспорт
That is one of the nicest looking crossmembers I've ever seen on a custom swap! Most guys do things so half-assed, it's awesome to watch someone doing things the right way.
judging by that workmanship, and the trucks you see in the background, that shop is for sure a high end quality place to get a truck built. i bet every single one of those has that same level of craft under it.
Yeah, it’s extremely nice work.
Still not a " mid-engine " truck , just some engine setback like most any other pre 2021 Corvette and a few other cars.
@@bobroberts2371 It's by definition a front mid-engine, the engine it between the two axels, therefore it is mid-engine.
@@anzacxlag2606 Go you are saying that GM is lying when they said the 2020 Corvette is the first production mid engine Corvette? It appears that the truck is using the stock Corvette engine mounts / sub frame. Was the donor Corvette mid engine?
Your editor is maaadd, he always impresses me with his editing skills! I always enjoy watching the videos it’s sooo entertaining to watch, keep it up and Wrench Every Day!
second that . well side
@@shineautomotive side of what well?
be handy in a NASCAR truck race!!
Lmao I’m dead
Damnit, beat me to it.
The hood hanging over the front looks like a visor that was meant to be there!
6:42 Filename: "Jared's bad choices.tap" lol This says a lot about their friendship. 😄
Nothing to critique about those welds, damn fine work.
I though the same.
Jared really has brought up the quality of this channel. Good work bruh.
I like that you are showing the old International pickup some love. They were built like tanks and abused like a tank and few people appreciate them enough to fix up.
i love the length of these videos. been binge watching ya lately and really appreciate all the wisdom. the editor makes it like a tv show and its great
Bravo Jared, this build is by far one of favorites to watch on any platform!
You should fabricate a visor for the windshield. The hood looks like a visor.
I was thinking the same...
Keep up the good work I can’t wait to see it finished
Can't get over how far this channel has come. It's just as enjoyable as Tavarish. Great job, Jared!
It's a joy watching craftsmen work.
Jared! Love the video, can't wait to see some of these projects on track day! Hope you and yours and healthy and happy. Cheers!
I love this project. Over the pond, we don’t see things like this. Fantastic
The best guy there is! Thanks for another awesome video guys!
I've heard of torque steer but this is awesome. You never know how far you can go until you break it.
But only in front powered cars right? ...What this steering is doing I have no idea, I'm a bit confused about how this is happening.
Bent torsion bar in the directional control valve in the steering rack.
Really enjoy the content and makes my day seeing a video upload for you guys! Keep up the awesome work 💯🔥
I think Johnny Rev is my favorite project on this channel Jared you guys are doing a great job. Johnny looks fantastic with all the patina.
I want a job at J&J. Where would UA-cam car builds be without them? 👏 👏
loving this series Jared
such a cool truck
with a mean stance
can wait to see it rolling
Love your work Jared, enjoy your videos and thumb up.
Truck is coming up nicely.
I do enjoy Jared , he has a lovely way about him .
Project is lookin' good. Keep up the good work.
On my 58 Chevy p/u with a LS, I did a two into one air intake. I had air filters behind each inboard headlight location. I removed the inboard headlights and built screens to fit in the hole, similar to a 64 Ford T-bolt.
This is an awesome build, I love following along.
Can’t wait to see it out on the road 👍👍😍😍
Woo! Awesome fabrication work! Although I didn't mention it, I was one of those "Oh man, they'd better paint that underside after doing so much work" worriers!
Great episode, fantastic production!
Good job editor! This video looks like it could be a TV show!
That's looking really good. I would leave the mags in the front, and the orange steel rims out back. Maybe add an inch or two in width to the rears, but leave them orange! Looking good with all that patina! Awesome truck!
The camera work on this episode was really good!
Love ur vids, u are by far my fav yt channel
I'm loving this project! Still can't decide what body our LS is going to go in after we finish our mustang project, but an older truck like this looks like a lot of fun! And sooooo much room to work on it! Keep up the good work!
Remember working on my 1977 New Yorker, and couldn't figure out why my wheels were turning left. Then learned you had to adjust it by just slightly loosing where the hoses bolted to the steering box and move it slightly to the right or the left. This was back in the days before Internet and Google were your friend.
Yes Sir!! I love watching your shows, Jared! I have watched a good amount of your videos and every time I enjoy them even more. Keep them coming since that's what makes me enjoying the days even more. So, have a nice day and until the next one. Take care, you guys. I really love the work on that truck. That's giving me an idea just that I have to wait! You guys are awesome! And so until next time! Bye!
The editing with the puppy was awesome 🤙
I love watching these videos you do a good job of making a TV show out of your builds thanks for making my day and keep up the great videos..
Love the Internationals. Our Scoutmaster could stuff most of the Troop in his Travelall, and our friend used to load some of us up in his dad's Scout Mail Jeep, with right hand drive and a pink paint job. Never owned one, but I'm not dead yet...
These guys know what they're doing. 👍🏻
Yes! A shout out to the freedom factory would be a awesome episode you tavarish and cleeter!
Good thing they're fixing you up. C5 Corvette racks are NOT cheap.
I have a suggestion for the wheels... If you can find the same style steel wheels in the back in a 20 inch diameter, paint them the same orange as the factory wheels, throw some chrome beauty rings and center caps on... I think you'd keep the classic look with a modern touch. Where you'd find something like that... I don't know. Just a thought though.
THE ONLY THING DRIER THAN MY HUMOR IS THE SAHARA 🤔
Great vlog Jerrod 👍🤓🇺🇸
Amazing fabrication work!
about the intake i would say get an as big as you can airfilterbox for whatever vehicle you can find, and make it a nice clean fit, a work truck is a work truck so i suggest you make it so it can withstand some dust
When you went to help freddie I thought this project had fallen by the waistline but this upload has me back excited to see this thing rip
@@tspawn35 im hopeful that they will go back to it after this
I hate it when things fall to the waistline...
@@broshak9384 same 😔
Just now noticed the wheel spacers in the front,... possibly get some really deep dish wheels to clear the calipers!!!!
Can't wait for this thing back on road
The new editing 👌👌👌👏🏿👏🏿👏🏿
Thanks Evan! You're my new favorite channel subscriber :)
It idles awesome for first couple start ups
Hi Jared nice video 📹 and workmanship
Good work Gerrard and the other guys
this is just a sick sick truck! love internationals!
Those welds are 👌🏻 my only with that transmission crossmember is that it looks to drop down from the chassis rail a long way, just wondering how much clearance there is from the ground when the truck is sitting at ride height.
cant wait to see what kind of paint you do to this beast
Great work buddy
On your rear cross member, it seems to me that if the bottom of the tab were bent out a couple degrees, you'd never need the washers, plus it would bolt even tighter together.
Watching the truck with the hood on the roof, I thought "hmm, johnny rev needs a visor." I also really like the orange steely look on the back end, I think it would be cool to go with that style on the final build.
Talented guys.
3:35 😧🤭 Jaredddd... Didn’t knew u speak French, how lovely 😊👋😂
Looks like you got the room... quad turbo time!
Dang these guys know their stuff and are fast
Digging the Rebel Galaxy feel to the music.
Holy crap we need a wrench every day soundtrack! The music played in these episodes r just freaking amazing
I thought we were to make questionable choices......wrap that tank in foil and slap that exhaust under it. Use the fuel tank straps to hold the exhaust up! Lol
Loving the new music. Whiskey rock n roll.
thinking about Ford supervan, English Transit style, thank you for the weird crazy awesome inspiration. IH built some tough old rigs. People are only limited by their imagination, if they have torches, and welders.
Turning right only comes with the premium package, getting fancy!
Good work Jared!
You can drill/tap the water pump and install a barbed fitting for the steam port. Then you can ditch that long coolant hose and adapter in the upper hose.
Have you thought about putting Detroit steel wheels on it? I think the Steeles look great!
Love the Build. Please move that gas tank!!
Jared, I really want to see you hide that engine with a false cover that looks like a 4-banger or a straight 6 or something like that. You've actually got enough room in there for an LS-powered barbecue grill too. Drive to the lake and cook your brisket at the same time!
I friggin' love this truck...
Dang Bubba look at the clearance on that transmission tunnel. You can drop that down so Sally Mae can sit in the middle right next to Johnny Reb.
That grille looks very similar to the Australian XW Ford Falcon. A bit thinner, but it has the look
u ever think about putting a corvette rear end on it . it would b a good idea love ur videos btw ur a hell of a macanic
you know they plan on making it a tow-rig right? Im not sure, but a corvette rear might not be the right choice for putting all that weight and stress on it.
That’s a nice Scout sitting next to that pickup.
Keep up the awesome videos
love these guys!
Always sound advices guys
U got so much engine room it blows my mind
There's a whole wide range of "fragrance" between "less" and "smellier", Jared.
Another reason to be thankful there's no odorama on UA-cam yet 😜
It’s funny looking at these older cars and trucks with such big engine bays , it’s makes even a 6.2 look small. But that’s good , more room for snails 🐌
You should do a hood scoop for air, haha i like the weird of center ones but it looks like yours is already setup to be in the center.
Can't wait for the Honda Roussey
Randy is like Jared to Tavarish..
There is so much space in the engine bay. Im jealous
Should do the steam port kit so the rear steam ports are used also.
6 liter is so powerful even a RWD has toque steer. Love the show.
Yay Bosco! Now why doesn't Freddy have a dog at his shop?
Also, Shoutout to Editor Randy! Slick production. Nicely done.
The real question is when are you taking it to the freedom factory??
I mean the dale truck is also a naturally aspirated ls soooo....
@@zach2beat yeah, but it has a quite big shot of giggle gas now, so...
Paused after 30 seconds.... Dude.... Obviously you SLAM On the brakes to turn to the right..... Duh!
Doesn't this guy know anything?
😆👍👊
A set of nice wide banded steels would suit it very well
when is the honda limo coming back?
defo was loving the build . I'm from over in the uk and i race with dark side developments where Mr J got the bits from . hopefully more on the honda soon
Stay tuned. There's an update on the status of Honda Rousey coming very soon...
@vtuned needs to make his trans mount like this one!
The Boscoe callout lead to me not paying attention to the auto work for the rest of that shot.
Also, Clear that Patina!!
Great vids
cleeter name drop. nice!