I used a torch to lightly heat the balancer and slid it all the way on with no problem sloppy mechanics style. Some put it in the oven at 300 for 20 minutes...been watching your channel for awhile now but subscribed todayyyyyyyyyyyyyy....oooh weeee
so just any electric impact will do? I know you’re supposed to torque the balancer bolts to spec but I just want to make sure the impact won’t over do it and damage the engine
How do you torque the balancer down without the engine rotating, I’ve heard of it’s on car to put it in gear but I’m also concerned that it could damage transmission. Any feedback ?
Idk who the hell told you that in car leave it in oem and torque it down to 250ft on the stand it’s the same thing it’s a pin in the engine stand that allows it not to spend same concept
@@TheLsSwapGuru I think its my brain, cuz when I hook up the OBD 2 its reads linkage error. I start it and it runs cool for about 3 minutes then it starts running bad
I used a torch to lightly heat the balancer and slid it all the way on with no problem sloppy mechanics style. Some put it in the oven at 300 for 20 minutes...been watching your channel for awhile now but subscribed todayyyyyyyyyyyyyy....oooh weeee
Thanks for the love and thanks for finally subscribing for some good stuff coming 🤘🏾🦍
So a balancer without a key doesn't have to be clocked any certain way?
Nope
Nice how to video !!!
And Happy Mother's Day To your wife !!!
Thanks I’ll let her know Ooowwweee
I appreciate your advice by putting the nut into the harmonic balancer I got mine off appreciate you
2:01 lmao
I needed to know this, thank you.
Did u have to mess with any woodruff keys? My new one came with a woodruff key, do I have to put it in?
That preview at the end thouuuu👀👀👀
🤣😂😅 a lot of people gone miss that because they don’t watch all the way through but glad you peeped it bro hahah it’s yo time to shine
What’s the difference between stock balancer and the c5?
The distance from the engine, there's 3 different sizes
so just any electric impact will do? I know you’re supposed to torque the balancer bolts to spec but I just want to make sure the impact won’t over do it and damage the engine
How do you torque the balancer down without the engine rotating, I’ve heard of it’s on car to put it in gear but I’m also concerned that it could damage transmission. Any feedback ?
Idk who the hell told you that in car leave it in oem and torque it down to 250ft on the stand it’s the same thing it’s a pin in the engine stand that allows it not to spend same concept
Monte Carlo is sweet. ✌🏾💯
Yes zah stay tune
Good stuff guru ❤💪
Appreciate it bruh
Man just put mine on the old way 😂 hope it holds up
Lmao it’s all good bruh what ever works
What up Guru! Where you located at I need some work done, I live in Riverside
Los Angeles hit me email lsswapgurperformance@gmail.com
We’re do you get the tires for the black car
I know this video is old but I noticed the car at the end had Delaware plates ?
Yep he’s in San Diego
What bolt did you use to run through that socket and what size socket? To take it off
15/16 to remove, search eBay for ict billet type install tool for harmonic balancer, new gm bolt too
There’s no way u just got that bolt out with a 3/8 impact 🧢 😂
Primo priomo👍👍👍👍
Love your videos....Get a damn external mic with a dead cat please. Driving me crazy!!...
😅😂 I got you bruh that’s gone make me look official to huh lol
Greasy gloves=straight man's beard oil.🤣
Damn right 😂🦾
G BODY GANG BANG 💥 BANG 💥
✊🏾
Where did you get that bolt??
These kits are trash
Thank you
💯🦾
Ba the Milwaukee 1400lbs 1/2inch would pop that in less than a sec.
Lol yeah that’s a LIL 3/8 drive tho my 1/2 drive earthquake does the job but a Milwaukee would be nice to have
@@TheLsSwapGuru worth it
What up Bro, my LS Swap runs like shit. Need your help please
Email me at lsswapguruperformance@gmail.com be sure to state we’re the vehicle is located and what issues your having
@@TheLsSwapGuru 3969 S Gramercy Pl Los Angeles CA, 90062
@@TheLsSwapGuru I think its my brain, cuz when I hook up the OBD 2 its reads linkage error. I start it and it runs cool for about 3 minutes then it starts running bad
I just got the newer version of that Strap on.. Lmao.. I love that damn gun
Man I might have to buy another one I’m getting all brand new tools soon
@@TheLsSwapGuru we always need more tools bro.. Lol.. I want that $1000 boi that Snap on came out with last year..
1/2 inch
Their 3/8 Electric Ratchet is awesome also
Naw I’m coo on that my earthquake works fine for 3 hunnit 😅🤣🦾
I split my finger open 1 time using that same puller i said never again!
Yeah it’s pretty crappy
Lmao a strap onn
So I just ask for ls7 crank bolt
Uuuhhh yeppp
I assume you would use these parts if your taking off all the truck accessories and using simple brackets?
Lss bracket you don’t have to remove the harmonic balancer
Dude. you skipped the only part of the video I came here for :( breaking the bolt
My bad champ thought I got that on camera if your having a issue getting the bolt of use a Torch heat it up use a breaker bar then try to take it off
@@TheLsSwapGuru Thanks mate. Adding the heat made all the difference. Such a relief when the breaker bar finally started to move.
I bet it did lol glad it worked out champ
You gonna have to apologize to the strap on..lol it got the job done in the end🤷🏾♂️😂🤣
Yeah man it sure did hate the price but love the product 👽
Earthquake FTW !
Man frfr they just heavy af but for a job like this oh yeah fashoe
Strap on is right expensive ass tools lol i use to always buy them shits
Lol what about the socks or there jackets 💯
That dinky impact is not going to do anything.
👍🏾