Nice video. I was only in Paramount Browns yesterday and I noticed they had garden blowers for $129 their own brand. They looked really good. My old Pope is starting to drip oil everywhere. Was going to go to Bunnings but this one looks really good
Had one of these karts in the shed that I revived. Put a new motor on with torque converter, rips now, pulls wheelies and hit 75km/h. Now I’ve got a complete suspension build on the way and a second motor swap planned.
I got a second hand one the other day and its awesome. Its just so hard to find after sales service. Most parts are easy to find, but try and find a rear hub with a keyway...
@@chrisvela4860 would recommend highly grabbing a 2 to 1 wet clutch for them. Sadly you will need a 20mm shaft engine or pay extra for a correct clutch with a 19mm shaft. But it's an awesome upgrade. (Or do what I did and dodgy the 20mm clutch to fit the 19mm engine 😂
Hi mate I have had no problems, sounds like you need to adjust your throttle cable to make it idle lower. Thanks for watching I appreciate your support:)
Yeah that would be fun :) I see you have a mini bike, ive always wanted one of them but the gokart was cheaper for some reason?!?! Then I was thinking king maybe a post bike would be better because then you can go on the road :)
@@CORINKERSTEN I've got 7 mini bikes I sold off most of my kart stuff years ago but wanting to get back Into them and buggies cost an arm and a leg here in the state for stuff to thanks for reply you sold me on buying one of these karts
Yeah it does have a govenor, Also the throttle could get a little bit more movement. Ive been told 10kmh more but doubt it to be honest. Thanks for watching ULTRA RC mate! !! I appreciate your support!!!
Not really sorry mate, Isn't a track just our driveway but really makes a mess and it's my parents place so I've not ridden since the video :) Thanks for watching I appreciate your support:)
@@Mason-pe4kc Hi Mate, This is the one I got but it needs some modification to work. as the output changes the chain alignment. I had to weld up a mount for the engine that moved it to the side! maybe there is an easier option but couldn't find one. Good Luck and have fun! www.ebay.com.au/itm/294251350722?_trkparms=aid%3D1110002%26algo%3DSPLICE.SOI%26ao%3D1%26asc%3D20200818142836%26meid%3D483d4264429d4735ae23d4dd759bcec7%26pid%3D101197%26rk%3D1%26rkt%3D10%26sd%3D293560734934%26itm%3D294251350722%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DPromotedSellersOtherItemsV2%26brand%3DUnbranded&_trksid=p2047675.c101197.m1850&amdata=cksum%3A294251350722483d4264429d4735ae23d4dd759bcec7%7Cenc%3AAQAGAAACAH5kg7PUiE9nhcOS7%252Bx%252BRonue%252BBy6yhnHy9DXAjQT4jBnI12WwP316R3dAALYEAqMDQQYxjbx1Emc26de%252BkUT1cP19wKSmSixUojLNpxl7j2e0yix297yVWk2b9tVhnzFS1E9WjacuPjS8oF3UkUp7NLx6sWMQb8o3Qj%252Fb%252BPL8TYXV9iJ%252FMgcqtIQQZTd8qxlnG8ZS0bN25v9dSNdR68Dwo5Jmziwsiv30YZevCZEw%252BJaUVDLLGRoMfTN%252BB5x0sj6w4zXrH8%252BTVzKDoDMp9fgTtTS806pb%252F01ipaWgCara3vFBGh9rR7NESjHf%252B4ZG4Gzyc75%252F9tfq48PfN68pCUXkMFmXg6x4y4gVf2VTFDFu6%252BIBkEmtCi7Ha%252BO7daydxG8HNSrKSvybuqLjgJJMET58qQjp662jEls4bOhy2CGSKCh5A3i%252FgtHleg36Pkh%252Fw9XLB9pDZa%252Ft1zYIyr8XQ8uI5fBzUznUC88tlPweqe%252BU31ocTuhlUGZAURoXP7kp57qVf%252BmdJiJAo3k4BVOCxcowQ79O8o8YrfmT4SPi%252Bdd3M4BDqTaCB88oISly6cbc5KhPqnE9kk298%252BQP8FiW8uU9h%252Bnc0IvvGFQP%252FyYyRXq3jSSEZGsNjHEt1iWZs%252BSohAbtMgxelzCaWID2dUNx8gdsdtEMlKtkugoED6edfXAZ8j%7Campid%3APL_CLK%7Cclp%3A2047675
I had no problems worked perfectly. Have had on other engines tho. You can adjust the throttle end stop so that it always has a little bit of throttle that will keep it from stalling. I'm assuming it has no power with choke on still and black smoke? Just have a play that's part of the fun, for me anyways. If you just want it to work they will do it for you. Have fun and thanks for watching :)
Cool kart, few questions, how much do you weigh? I am interested in getting something very similar, in fact it's the same thing, just branded differently for Mexico. Also, would you be able to attach at least one headlight onto the front?
hi! I have a similar go-kart as the guy in the video, with the same engine, the only difference is that mine has a simple front suspension as well. I usually use bicycle lights as a headlight, it works pretty well, and you can just put it on the frame. also, you can just take them off and charge them when they're out of juice :)
Yeah so It attaches to the pivot for the rear suspension. The problem is you can't use the seat padding as well without cutting it. If it's the same as mine. Hope that helps.
Yeah its not to hard, Lots of videos online. I am planning on making one. Basically you just create a link from the throttle directly to the throttle valve and bypass the govenor. Removing all the springs! Thanks for watching ULTRA RC mate!!! I appreciate your support!!!!
Saw one similar to this one at 196cc 6.5hp. Its around 1,200$ Really wanted a go kart for the holidays. Thanks for the review
Nice video. I was only in Paramount Browns yesterday and I noticed they had garden blowers for $129 their own brand. They looked really good. My old Pope is starting to drip oil everywhere. Was going to go to Bunnings but this one looks really good
Had one of these karts in the shed that I revived.
Put a new motor on with torque converter, rips now, pulls wheelies and hit 75km/h.
Now I’ve got a complete suspension build on the way and a second motor swap planned.
What cc
EPIC!!! I like the track, looks pretty worn in. 😂😂 Great work. 👍
Yeah pretty fun but making a bit of mess 😆
Nice video my friend. Thumps up from Germany ...
Thanks for watching mate!!!!
Kewl thank for the video mate 👍 was hoping to see in action before my son gets 1, Might have to get myself 1 as well 🤔 😂
love the t-shirt i am a cadet for heysen group
I got a second hand one the other day and its awesome. Its just so hard to find after sales service. Most parts are easy to find, but try and find a rear hub with a keyway...
Finally some new content! Looks fun :)
Just practicing so i can beat you on the track next time 😅
Thanks for watching,
I appreciate your support!!!!
Great video!
Well im about to go get one now LOL
doing some cool skids there bud
Yeah mate!!!
Thanks for watching ULTRA RC!!!!
I appreciate your support!!!
I’ve got one I’ve fully inclosed it and it has a light bar and an ac and a radio built the extentions my self
Great video, can you tell me if it has a live axle ?
*Paramount browns gokart 6.5HP 😲wow , 👍amazing brother. Old friend Comeback to listen. My plane has landed, good luck always aamiin ... 🤲🤝🙏🛩*
Great run 😊👍
Hey. I'm thinking about getting one of these. Do you know what the clutch and drive shaft tooth counts are?
I've got one of the things it isn't the same brand but it looks identical so I can check tomorrow
@@Theskidjesus oh cheers. I ended up buying three of them they are so much fun 😂 well worth it 👌
@@Drazard yeah they're great
@@Drazard holy smokes! Three??!! Nice. Im going for this go kart and a dirtbike!
@@chrisvela4860 would recommend highly grabbing a 2 to 1 wet clutch for them. Sadly you will need a 20mm shaft engine or pay extra for a correct clutch with a 19mm shaft. But it's an awesome upgrade. (Or do what I did and dodgy the 20mm clutch to fit the 19mm engine 😂
i saw on your shirt that you go to the sa fire cadet, but what is funny is i do fire cadets except in tas
Do you guys know where to buy rims for this cart? It’s a 60mm bolt hold to bolt hole pattern.
Paramount browns or helmetkarts,
Thanks for watching:)
@@CORINKERSTEN Какой диаметр трубы рамы?
they are really fun to ride but they suck to turn no weight on it i really want to get the front suspension swap from helmet kart
Do you have problems with the clutch? I have one and an hour of use, the kart start moving at idle
Hi mate I have had no problems, sounds like you need to adjust your throttle cable to make it idle lower. Thanks for watching I appreciate your support:)
Top speed thanks
Wicked
Been looking at one of these they also sell a drift trike
Yeah that would be fun :)
I see you have a mini bike, ive always wanted one of them but the gokart was cheaper for some reason?!?!
Then I was thinking king maybe a post bike would be better because then you can go on the road :)
@@CORINKERSTEN I've got 7 mini bikes I sold off most of my kart stuff years ago but wanting to get back Into them and buggies cost an arm and a leg here in the state for stuff to thanks for reply you sold me on buying one of these karts
Do you think the store can send it to the U.S?
Nice
Is it 2 wheel driven or single wheel driven?
Yep good question it has a solid rear axle so 2wd.
Thanks for watching mate!
ultra rc cheers for replying so quick! I have one on order and can’t wait to play around with some pvc slips on the rear wheels.
Do you think it has a restrictor in it?
Yeah it does have a govenor,
Also the throttle could get a little bit more movement. Ive been told 10kmh more but doubt it to be honest.
Thanks for watching ULTRA RC mate! !!
I appreciate your support!!!
Any chance you have an outline of your track?
Not really sorry mate,
Isn't a track just our driveway but really makes a mess and it's my parents place so I've not ridden since the video :)
Thanks for watching I appreciate your support:)
how fast can it go on the road? do u think i should buy it?
I got one of these years ago 1st engine lost all power 2nd engine didn’t have enough power so we now have a 250 2 stroke on it
Awesome mate that's the way to do it:)
I've added a torque converter which makes a big difference!
@@CORINKERSTEN great vid man! Is there a link to the converter? Maybe even a install vid?
@@Mason-pe4kc Hi Mate, This is the one I got but it needs some modification to work. as the output changes the chain alignment.
I had to weld up a mount for the engine that moved it to the side! maybe there is an easier option but couldn't find one.
Good Luck and have fun!
www.ebay.com.au/itm/294251350722?_trkparms=aid%3D1110002%26algo%3DSPLICE.SOI%26ao%3D1%26asc%3D20200818142836%26meid%3D483d4264429d4735ae23d4dd759bcec7%26pid%3D101197%26rk%3D1%26rkt%3D10%26sd%3D293560734934%26itm%3D294251350722%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DPromotedSellersOtherItemsV2%26brand%3DUnbranded&_trksid=p2047675.c101197.m1850&amdata=cksum%3A294251350722483d4264429d4735ae23d4dd759bcec7%7Cenc%3AAQAGAAACAH5kg7PUiE9nhcOS7%252Bx%252BRonue%252BBy6yhnHy9DXAjQT4jBnI12WwP316R3dAALYEAqMDQQYxjbx1Emc26de%252BkUT1cP19wKSmSixUojLNpxl7j2e0yix297yVWk2b9tVhnzFS1E9WjacuPjS8oF3UkUp7NLx6sWMQb8o3Qj%252Fb%252BPL8TYXV9iJ%252FMgcqtIQQZTd8qxlnG8ZS0bN25v9dSNdR68Dwo5Jmziwsiv30YZevCZEw%252BJaUVDLLGRoMfTN%252BB5x0sj6w4zXrH8%252BTVzKDoDMp9fgTtTS806pb%252F01ipaWgCara3vFBGh9rR7NESjHf%252B4ZG4Gzyc75%252F9tfq48PfN68pCUXkMFmXg6x4y4gVf2VTFDFu6%252BIBkEmtCi7Ha%252BO7daydxG8HNSrKSvybuqLjgJJMET58qQjp662jEls4bOhy2CGSKCh5A3i%252FgtHleg36Pkh%252Fw9XLB9pDZa%252Ft1zYIyr8XQ8uI5fBzUznUC88tlPweqe%252BU31ocTuhlUGZAURoXP7kp57qVf%252BmdJiJAo3k4BVOCxcowQ79O8o8YrfmT4SPi%252Bdd3M4BDqTaCB88oISly6cbc5KhPqnE9kk298%252BQP8FiW8uU9h%252Bnc0IvvGFQP%252FyYyRXq3jSSEZGsNjHEt1iWZs%252BSohAbtMgxelzCaWID2dUNx8gdsdtEMlKtkugoED6edfXAZ8j%7Campid%3APL_CLK%7Cclp%3A2047675
Good grief man, how do you keep it down? That must fly!
sucesso pelo conteúdo e paixão pelo trabalho🔔👍
Hey mate, did you have any idling issues when you got it new?? Mine wont idle without choke once warmed up
I had no problems worked perfectly.
Have had on other engines tho.
You can adjust the throttle end stop so that it always has a little bit of throttle that will keep it from stalling. I'm assuming it has no power with choke on still and black smoke? Just have a play that's part of the fun, for me anyways.
If you just want it to work they will do it for you.
Have fun and thanks for watching :)
Cool kart, few questions, how much do you weigh? I am interested in getting something very similar, in fact it's the same thing, just branded differently for Mexico. Also, would you be able to attach at least one headlight onto the front?
hi! I have a similar go-kart as the guy in the video, with the same engine, the only difference is that mine has a simple front suspension as well. I usually use bicycle lights as a headlight, it works pretty well, and you can just put it on the frame. also, you can just take them off and charge them when they're out of juice :)
Hearing protection but no helmet?
Whats the metal clanking sound from?
It had a chain gard on I removed it since.
Thanks for watching Ultra Rc Mate:)
How fast is this?
Bit of oversteer mate?
Yeah the older ones are better they turn sharper :)
When you lean forward it drifts real good :)
Thanks for watching!
what do you reckon the minimum and maximum driver height would be?
5;4
min is around 140cm (4.5 ft) and id say max is around the 6 feet area as my dad can get on it and hes 5.11
Hey mate, where did you attach the seatbelt to?
Yeah so It attaches to the pivot for the rear suspension.
The problem is you can't use the seat padding as well without cutting it.
If it's the same as mine.
Hope that helps.
top speed?
The guys at the shop said it goes 50kph,
Seems about right.
Thanks for watching Ultra Rc Mate!!!
How tall are you? Would it fit someone 6’1”?
I am 5'8
So I think you would fit but not very comfortably.
You can get longer frame versions from helmet carts website.
Thanks for watching mate :)
How do you ungovern them
Yeah its not to hard,
Lots of videos online.
I am planning on making one.
Basically you just create a link from the throttle directly to the throttle valve and bypass the govenor.
Removing all the springs!
Thanks for watching ULTRA RC mate!!!
I appreciate your support!!!!
I have one but the back is extended by like a foot
cool i have one of them but the clutch broke
Yeah i thought that might happen so i got a spare.
How long did it last?
Thanks for watching ULTRA RC mate!!!
I appreciate your support!!!!!
@@CORINKERSTEN About 4 to 6 months
@@banjoreimann8372 our clutch broke and it was only used for a week!
Hello.tell me the dimensions
How tall are you?
I'm 170cm ish
Not sure in feet but under 6
This is comfy for me anyways!
Thanks for watching Ultra rc mate!
And no seat belt and it's old as
Hi mate thanks for watching,
It does have a seatbelt and you sure do need it :)
How tall are you?