I have a personal project I've been working on and I got bored of it, its half atv and half gokart, I think you would be very I interested in it. Let me know
Tormach gave The Hacksmith channel up in Kitchener Ontario one for free as a marketing move. If they reach out, Grind Hard could strike the same deal maybe.
a lot of youtubers/content creators dont seem to understand the importance of music in their content. your music is always on point and flows well with the content. it rivals even some bigger channels with bigger budgets. i point this out a lot but its important and i appreciate it lol
I feel like no Moddessy ever hit it's peak until now. You guys fixed and modernized all it's shortcomings. Now it makes a Pilot 400FL look like a Yerf Dog! The fenders are on point too! Sure completed the look. That machine is worth a pretty penny now as well. What an awesome final fit and finish. Bravo! Oh, and that drone footage had me laughing out loud! You're getting great at it, but the fails are pretty epic!
I know right! These guys are doing exactly everything i dream of doing and building if i can get my own shop built someday. This channel helps motivate me towards gettin er done
awesome build! It looks like the rear shocks are working well I would take ous some preload and make adjustments to the hi-speed adjuster and slow down the rebound. it would help the back end form getting bucked up.
Duuuuuude your pilot skills on the freestyle quadcopter have gone through the roof!!! Great footage- probably the best I have seen on your channel ever- just great job!!! Also the “Honda” is awesome. Great job gentlemen.
The odeyssey whas the first real, fast go cart sorta thing I ever drove. The fenders brought me right back and reminded why I love this project. Very cool.
Right on,over all this channel keeps getting better and better,from video editing,music and contents of builds ,living up to its name without a doubt, keep it up and may your needs be met when needed....
Almost ready for the Baja 1000 . There is a product called Puck Board that you could use for body cladding on the lower part of the frame. It comes 4x8 sheets from 1/16" to to 3/8" very easy to mount no holes needed to mount .
Don’t think this 2JZ lawn mower project will turn out good with no suspension and too short. Might be better to 2JZ swap the Taco and install real long travel on it😉
@@lukestoyz Kinda gotta agree its not that great of a platform. Maybe if whole suspension setup was designed from the ground up and length added with say rear platform, then maybe
Its like that for the extra power!!!!!! if it was not wider that thing would roll like a fir log down a mountain, and has bigger axles, the front needs wheels spacers at most .....
I was thinking the same thing. Maybe some better wheels, tires all around and wheel spacers in the front? When he goes to corner with power the front end is being pushed hard.
I remember when I was a kid the Odessey was the Polaris side by side. Those things were so tuff you could try to tear them up by rolling them but they would keep on rolling. I watched a kid jump a creek and roll several times but we just turned it back over and he just kept going. Ahhhh the memories of being young and not having to worry about tearing toys up.
I broke my back racing Moto-X in 1990, I would have given anything to have had something like this to play with after my accident! So damn cool! Well done guys!
Ithink the rear fenders need to be over the tyres. It doesn't look right nor does it make sense! Always a pleasure to watch you guys no matter what, There isn't many people out in the world with smart noggins like you guys. Keep up the great work can't wait for the next video!
Going thru the older videos and keep noticing roads signs!!! My first go-kart was a Manco Dingo “not full roll cage” version and I used a no passing sign as a skid plate! Fit and worked perfectly 😂
Wow man epic rip, this entire video was just awesome, keep the content coming guys, love everything about it, the builds, the editing, the camera angles, drones ect. You guys just rock
With all the custom fabrication work you do on small parts, you guys should look into a CNC mill. Also, can you tell us what type of drone you're using ... maybe even make a video showing more of the drone itself and how you are piloting it? I know practically nothing about them, but I'd like to learn. Most of the drones I've seen don't seem to be as maneuverable and so I'd like to learn more about it. Anyway, really enjoy your channel. As they say, when you love what you do, you never have to work a day in your life!
I remember them from the 80s. One of my freinds had one. But not one built like that bad boy. No just stock but fun is all get out. Great job one that one. Only one like it ,nice machine.
Not that Grind Hard will ever see this, but if you guys want a nice way to verify your caster/camber when building your toys, the LongAcre Acculevel with caster/camber wheel or hub adapter is the way to go. The things are awesome to use and don't require a level surface.
I look forward to seeing your video builds. I want to do some build one day and be like you guys. Thanks for inspiring mind all over. You guys are awesome.
Some plastic lower body panels would help the rocks kicked up from the front tires to not pelt the driver. There's a noticeable difference in speed with the beefed up clutch. It looks Hella fast!! I'd say add some LED bars and whip for those night time Dune rides!! That and I believe the name is Sand Star paddles!! GPS for the Dunes is also a must have item.
Awesome build guys!!! I grew up on the Odyssey and eventually a pilot love to see there still kicking it! Wish Honda would bring them back I know they have the new Talon UTV but should do a single seat like Polaris.Honda started the game they should get back in it more! Thanks again 👍🏿👍🏿 also I miss the hand controls(think if Honda brought them back in a vehicle they could get people that can’t use there legs out there ripping)
There are a couple of old odessys for sale locally. I really want to build an electric vehicle of some sort, but wow it's an expensive undertaking. I never imagined it would be so much! Happy building guys! You are an inspiration to all of us! I would love to know more about your spinal cord disease. I have syringomyelia and possibly Chiari 0.
My dad just bought a Lincoln Welder at Big R and I am so inspired by you guys even though I am so young. Me and my friend want to make one of those and we are saving up for a power wheels and a four wheeler thats cheap.
New welder giveaway and merch here! www.grindhardplumbingco.com/
Junk
Grind Hard Plumbing Co can you guys do a top speed run for the Odyssey?
I would love to win it!! Thanks for the opportunity
BY FAR! the most capable, fast and jumpable build to date!!!! cannot wait to see this thing on a UTV track and the dunes! holy shit its awesome.
I have a personal project I've been working on and I got bored of it, its half atv and half gokart, I think you would be very I interested in it. Let me know
So what you guys really need next is your own CNC Plasma table.... imagine the creativity that would transpire. Great work guys
Tormach gave The Hacksmith channel up in Kitchener Ontario one for free as a marketing move. If they reach out, Grind Hard could strike the same deal maybe.
How much for a customer,
@@IOUaUsername hey i live in Kitchener! How cool is that! I feel kinda famous in a way hahaha
Laser!
I'd love to see the Odyssey with a massive rear wing, it loosely reminds me of some of the old Tamiya RC buggies. Love it!
Some JAK X carts
Omar Gherd EXACTLY
Yes, exactly! Nailed it!
Omar Gherd exactly!.
That’s what I seen in my inbox and had to wonder
(when was I drunk enough to say Omar gherd) and where did I learn That
Omar Gherd THEN I noticed it’s your name lol
Everyone needs a Sam. He's the guy that will do any job you need done.
He's definitely my favorite out of the regulars. He doesn't say "yew" either.
Sam is a good addition to GHPC
helo
Man of all jacks
a lot of youtubers/content creators dont seem to understand the importance of music in their content. your music is always on point and flows well with the content. it rivals even some bigger channels with bigger budgets. i point this out a lot but its important and i appreciate it lol
Finally. What we've all been waiting for.
True I think it looks so much better now
@@GrindHardPlumbingCo I agree. Very good looking
I know, the Odyssey build is what made me subscribe 👍
@@bigretardhalo I've been around since the first vid ever that I know of
I feel like no Moddessy ever hit it's peak until now. You guys fixed and modernized all it's shortcomings. Now it makes a Pilot 400FL look like a Yerf Dog! The fenders are on point too! Sure completed the look. That machine is worth a pretty penny now as well. What an awesome final fit and finish. Bravo! Oh, and that drone footage had me laughing out loud! You're getting great at it, but the fails are pretty epic!
Sam: these fenders are indestructible.
Ethan: challenge accepted
The color scheme is perfect! It's like an 80's Honda but much more awesome.
This channel has some of the best content, shots and editing! Keep sending it!
Don't forget the drone crashes
Cap
I know right! These guys are doing exactly everything i dream of doing and building if i can get my own shop built someday. This channel helps motivate me towards gettin er done
Yes you can tell it's much faster/quicker. Also the camera work is killer. Thanks for the entertainment. You guys are killing it
awesome build! It looks like the rear shocks are working well I would take ous some preload and make adjustments to the hi-speed adjuster and slow down the rebound. it would help the back end form getting bucked up.
Duuuuuude your pilot skills on the freestyle quadcopter have gone through the roof!!! Great footage- probably the best I have seen on your channel ever- just great job!!! Also the “Honda” is awesome. Great job gentlemen.
When will we see full scale production! I want one, but maybe with a turbo Rzr motor........
Could you imagine an army of these things?
Nah 2 stroke ftw
M1000 turbo motor. Thing would rip so hard. It already has more horsepower than your average car, imagine an additional 100 hp.
The 2 stroke better and lighter!
Frame kits would be sick
The Odyssey and Pilot are underrated. They are what side by sides should be. Awesome build!
Wow... I remember these. Every time I've asked about them over the years, someone would always ask why I was looking for a mini van...
This is one of my favorite projects on my favorite channel! That thing absolutely rips!
The wheels need to be gold for sure!
The odeyssey whas the first real, fast go cart sorta thing I ever drove. The fenders brought me right back and reminded why I love this project. Very cool.
You “accidentally” popped the bead off😉 sounds like a good excuse to get some bead locks for that beast👍
Inner tubes would be cheaper
But not as cool
Bead locks and 5 inch paddles
Just wanted to add your FPV flying has got exponentially better! Really enjoyable to watch now. Keep it up
needs some round buggy headlights!
Like the ones on the jeep in goonies 😂👍
Right on,over all this channel keeps getting better and better,from video editing,music and contents of builds ,living up to its name without a doubt, keep it up and may your needs be met when needed....
Zen and the art of Grind Hard Plumbing Co. A personal guide to making things better and more balanced.
This seriously is one of the best channels!! I look forward to Friday's everyone hit the Subscribe button these guys wont disappoint!!!
these guys are a great inspiration! makes me put more effort into my videos
Almost ready for the Baja 1000 . There is a product called Puck Board that you could use for body cladding on the lower part of the frame. It comes 4x8 sheets from 1/16" to to 3/8" very easy to mount no holes needed to mount .
Suspension Mounted Fenders would be nice, but alot of Fabrication!
CHALLENGE ACCEPTED?
Yep as they are they are just worthless.
At least for the front, yeap.
That drone is tough! Great job on the build. Looks like it could be fun in the sand!
That is absolutely amazing!!!! SEND IT!!!!🤙
Thanks!!
Great build. The white fenders look really clean with the white swing arms. Looks like a blast to drive.
Searches definition of "send it"
*grind hard plumbing company
I typed "gri" on search and their channel popped up 8)
The J mine was first
DONT DO THAT... THATS LARRY'S PHRASE
If you wanna see some sending go look at Ronnie Mac or ostacruser
Larry the enticer... the true send it
I am in awe at the fantastic work you guys do in that super rustic shop. Keep up the fantastic work
GRATS on a millie. I’m late.
Your fpv has gotten SO much better! Keep up the good work guys!
When are you and CarsAndCameras gonna do a video together???
Cold beer in hand and a new Grind Hard upload... now it's the weekend!
Ed: What happened?
Ethan: Um...the steering um...blocked.
Odyssey: \.../ ?
Hands down best Odyssey on the planet right now!
This is awesome but when are you guys getting to the 2jz mower 😥 I've been waiting for so long
Same here. I want that to be the next project you take off on
They told us in a video a couple weeks ago. They’re waiting on some parts and then the vid will drop
Don’t think this 2JZ lawn mower project will turn out good with no suspension and too short. Might be better to 2JZ swap the Taco and install real long travel on it😉
@@lukestoyz Kinda gotta agree its not that great of a platform. Maybe if whole suspension setup was designed from the ground up and length added with say rear platform, then maybe
jeeze this is a good channel. that odyssey is a freaking beast. handles those jumps like theyre nothing. awesome.
Is it just me or the front could be a bit wider? Loving the project
The rear is to wide
Its like that for the extra power!!!!!! if it was not wider that thing would roll like a fir log down a mountain, and has bigger axles, the front needs wheels spacers at most .....
yeah. They could get even better travel in the front then.
I was thinking the same thing. Maybe some better wheels, tires all around and wheel spacers in the front? When he goes to corner with power the front end is being pushed hard.
The fpv drone skills are 100% noticeably improved bro!!! And that odyssey is the dream buggy ive always wanted to build. Im super jealous hahaha
when your so early there’s no comments to read
Nailed it! You will have to come back and see what people are talking about
That is the awesomeness i expected when you brought that home, like what ? Over a year ago.
Fricken awesome, gentleman. Great job.
I got notification after one day....so I'm so sad about my phone ..
this is one of my favorite channels you guys make all my childhood dreams come true
first?
So close!
@@GrindHardPlumbingCo ah damn, next time! great video, love seeing the modyssey transform!
If only they were this nice when new. Didnt ride well when we had one as a kid. Still a blast. Really nice job guys.
You guys have the best builds on youtube!❤🔥
I remember when I was a kid the Odessey was the Polaris side by side. Those things were so tuff you could try to tear them up by rolling them but they would keep on rolling. I watched a kid jump a creek and roll several times but we just turned it back over and he just kept going. Ahhhh the memories of being young and not having to worry about tearing toys up.
Definitely my favorite build yet. Way to go GHP! Keep building guys!
I broke my back racing Moto-X in 1990, I would have given anything to have had something like this to play with after my accident! So damn cool! Well done guys!
The drone skills are so much better now, can't wait to see more!
This makes me want to dig my ol Odyssey out of the woods!. Great video. Entertaining start to finish.
Air chasin’ the buggy to Akina Boy U-132... these aren’t tears, the wind was in my eyes.
Grind on!
Ithink the rear fenders need to be over the tyres. It doesn't look right nor does it make sense! Always a pleasure to watch you guys no matter what, There isn't many people out in the world with smart noggins like you guys. Keep up the great work can't wait for the next video!
Going thru the older videos and keep noticing roads signs!!! My first go-kart was a Manco Dingo “not full roll cage” version and I used a no passing sign as a skid plate!
Fit and worked perfectly 😂
Wow man epic rip, this entire video was just awesome, keep the content coming guys, love everything about it, the builds, the editing, the camera angles, drones ect. You guys just rock
Another win!! Well done boys, love the build and love the filming!
15:01 insane aerial shots! 🤘🏽
With all the custom fabrication work you do on small parts, you guys should look into a CNC mill. Also, can you tell us what type of drone you're using ... maybe even make a video showing more of the drone itself and how you are piloting it? I know practically nothing about them, but I'd like to learn. Most of the drones I've seen don't seem to be as maneuverable and so I'd like to learn more about it. Anyway, really enjoy your channel. As they say, when you love what you do, you never have to work a day in your life!
Sandpoint, great place, great people.
This Canadian is moving south to that area soon! Excited.
Amazing work guys. I am always so pumped when a GHPC vid comes out!
It just keeps getting better and better, the whole thing. You guys are killing it, well done!
Nothing is indestructible on Grindhard Plumbing 🤣🤣
Gotta say, your drone skills are getting pretty good. Keep up the great work 👍
I remember them from the 80s. One of my freinds had one. But not one built like that bad boy. No just stock but fun is all get out. Great job one that one. Only one like it ,nice machine.
The music at 5:00 is a sick groove, new song for you guys if I’m not mistaken, keep up the good work!
I love the filming in between the talking, so soothing
brings me back to my 20s and 30s and drag car day now i'm 55 just love your work
Love it guys! Also great job with the drone! the shots you’re getting with it now are so sick!
Odyssey would be my favorite to take for a spin. What a beast !
Not that Grind Hard will ever see this, but if you guys want a nice way to verify your caster/camber when building your toys, the LongAcre Acculevel with caster/camber wheel or hub adapter is the way to go. The things are awesome to use and don't require a level surface.
Following the journey of this build,has been our Odessey.Such a well done trip it's been.
You guys are having Way..WAY TO MUCH FUN.
Love that odyssey...I want one now. Hell I've always wanted one...well like yours anyway.
It's the best you guys ever looked too! I don't recall such good editing in the past either
I paused the video to go buy some merch! Got me a hoodie and a t-shirt. Keep up the awesome content fellas!
Odyssey looks great with the fenders small parts big difference. lol at the drone hit shot. keep up the great work guys!
Wow those FPV drone shots are so sweet
I look forward to seeing your video builds. I want to do some build one day and be like you guys. Thanks for inspiring mind all over. You guys are awesome.
Bro, I'm in love with the area these dudes "play" in....totally envious, keep up the good work and videos!!!
That odyssey is a freakin' beast! 👍👍👍
Friday is my favourite day because of you guys
Some plastic lower body panels would help the rocks kicked up from the front tires to not pelt the driver.
There's a noticeable difference in speed with the beefed up clutch. It looks Hella fast!!
I'd say add some LED bars and whip for those night time Dune rides!! That and I believe the name is Sand Star paddles!! GPS for the Dunes is also a must have item.
130hp Odyssey on a UTV track?? YES PLEASE!!!
Awesome build guys!!! I grew up on the Odyssey and eventually a pilot love to see there still kicking it! Wish Honda would bring them back I know they have the new Talon UTV but should do a single seat like Polaris.Honda started the game they should get back in it more! Thanks again 👍🏿👍🏿 also I miss the hand controls(think if Honda brought them back in a vehicle they could get people that can’t use there legs out there ripping)
Sorry I don’t have any money to donate towards your channel. I love what you do and I watch all of your videos.
I love watching your guys videos and finding out you guys live 2 hours away is insane!!!
Great job guys!! Love to see you guys are having fun!! Keep it going!!
There are a couple of old odessys for sale locally. I really want to build an electric vehicle of some sort, but wow it's an expensive undertaking. I never imagined it would be so much! Happy building guys! You are an inspiration to all of us!
I would love to know more about your spinal cord disease. I have syringomyelia and possibly Chiari 0.
Dude. Edwin drone skills phenomenal.
I'm liking how the drone chase footage is improving :)
man! those drone shots gave me goosebumps.
Wow I wanna say you guys are KILLIN' IT! Cool upgrade to the merch inventory too! Keep it up ya'll!
Thanks glad to hear you like it!
Love it when you use Akina Boy music in ur vids Edwin!!!!!!
My dad just bought a Lincoln Welder at Big R and I am so inspired by you guys even though I am so young. Me and my friend want to make one of those and we are saving up for a power wheels and a four wheeler thats cheap.
I got to say those are some awesome drone shots! Nice job
This thing is starting to look like an Ariel Nomad, awesome!
You are getting really good at your drone following! you guys both have mad skills!
An absolutely brilliant build! I’d love to see a ramp to ramp gap jump. (Jump over the driveway, possibly.) Keep doing what you do!