If you don't have time to watch a massive video on soldering technique. Here is the essentials for soldering XLR and Mic cables. ENJOY! Any helpful comments are welcome.
Thank you for delivering the best XLR soldering video in UA-cam Land. So basic, easy to understand and informative. I wish I'd found this one before attempting to modify a twelve channel loom. It would have saved hours of grief and stress.
Thanks. Very helpful. At about one minute you recommend pulling on the wires "slightly" while unsoldering. This works great but suggest also mentioning safety glasses as solder splashes to the eye can happen - particularly for those not experienced in soldering.
If you're charging using a 3 pin DMX male to connector to plug into a ebike battery (cut off at 56.4v 2.5amp) and the solar system from the Genasun GVB-8 boost charge controller only has (2 wires) a (-) and (+). (the positive (red) has an inline 15amp fuse) do you just connect the black to 3and the red to 2..?
I like your video. Brief and clear Little tips: if you are right handed, start soldering the left-most first Is it true only me have opinion that braided shielding microphone cable perform better than stranded one? Greetings from Indonesia
Hi MIc, i assume the pic positive is just the active mic wire and the shield goes around it, where does the negative wire go to, the PTT negative? radio earth sorta thing...Fred.
Thanks for your most informative video, I would like to ask about using this cable in connecting my rel subwoofer, I am sure of the red wire going to my amplifier positive post my but not sure about the negative wire and the ground wire, thanks.
Thank you for delivering the best XLR soldering video in UA-cam Land. So basic, easy to understand and informative. I wish I'd found this one before attempting to modify a twelve channel loom. It would have saved hours of grief and stress.
Ah what a lovely comment! Cheers mate! Glad it's helping out :-D
I second that motion! Cheers.@@mikebdesigns
Cheers bro, saved me for my exam today.
No worries! Cheers for nod. Hope it went well!
Thanks. Very helpful. At about one minute you recommend pulling on the wires "slightly" while unsoldering. This works great but suggest also mentioning safety glasses as solder splashes to the eye can happen - particularly for those not experienced in soldering.
26 sec.in i already saw something thats good for me to use! That soldering iron holder on the bench vise mount is priceless!!!
HA HA HA Yeahhhh patent is in the post ;-D But it's my gift to you my friend!
@@mikebdesigns 🐱
Yeah i will buy a vise
Suwun master. Berguna bagi awak seng pemula 👍👍👍
Thanhks
Lovely, cheers!
How should I wire it, if I only have a hot and a ground wire?
Can this be done to a ebike charger with a XLR ?
What if your original XLR connecters don't have the ground force wire?
What would happen if I weld the mesh to another pin and not exactly to pin number 1?, there would be interference?
How to connect xlr female to 3.5mm jack sir??
If you're charging using a 3 pin DMX male to connector to plug into a ebike battery (cut off at 56.4v 2.5amp) and the solar system from the Genasun GVB-8 boost charge controller only has (2 wires) a (-) and (+). (the positive (red) has an inline 15amp fuse) do you just connect the black to 3and the red to 2..?
I like your video. Brief and clear
Little tips: if you are right handed, start soldering the left-most first
Is it true only me have opinion that braided shielding microphone cable perform better than stranded one?
Greetings from Indonesia
Thanks
I have an XLR connection with 4 wires instead of 3, but I have a 3 pin XLR connector
i have one and the top one is 2? Is ti just labeled wrong?
Hi, I have heard something about "half-balanced",or so. Would please tell me if it's true and what are they, if they exist?
Thanks!
Hi MIc, i assume the pic positive is just the active mic wire and the shield goes around it, where does the negative wire go to, the PTT negative? radio earth sorta thing...Fred.
Good
What radios use the XLR plug?
Can I replace a female XLR connector with a Male ?
thanks. wish I'd seen this vid 1st. I admit I had beer instead of tea.
Sir plz nabar do apne muje mic or dj me dono me chalana ho to
Thanks for your most informative video, I would like to ask about using this cable in connecting my rel subwoofer, I am sure of the red wire going to my amplifier positive post my but not sure about the negative wire and the ground wire, thanks.
This is the most british tutorial I've ever seen
there is no cup of tea or bicky to be seen...but what a joke. Monty Python himself couldn't touch that.
thanks short & sweet
Like @2021
how do you make a balance xlr to 2 RCA?
02:21 for Male
03:38 for female
ОЧЕНЬ ХОРОШО!
It's Very fast
Good