Pt.2 How To Install A Winch On Your ATV/UTV At D-Ray's Shop
Вставка
- Опубліковано 6 жов 2024
- DescriptionInstalling a winch on your ATV or UTV is pretty easy, do it yourself and save some bucks! Thanks for watchin'!
I created this video and I own all rights to all content in the video.
Music provided by : Kevin MacLeod incompetech.com...
Name of tune "Thingamajig", "Cold Funk", and "Niles Blues" Kevin MacLeod (incompetech.com) Licensed under Creative Commons "Attribution 3.0" creativecommons...
As a person that has done installs and wiring of lighting and emergency equipment on police and fire vehicles for 30+ years I know a good install when I see it. This is superb. You can also tell what kind of work a professional does by his shop. Your's sir is superb!!
Keep up the good work.
I’m a shop teacher for 30 years. This is maybe the BEST “how to” video I’ve ever seen. Definitely the best in all of you-tube.
I will check out all your stuff now, but at least I know all the in and outs of my winch install. Thanks
Best video ever seen about wiring a winch
I don’t normally comment on things like this but you did such a good job explaining things without a lot of blah blah blah me me me I just had to! Your editing was as good as your workmanship. And finally somebody with some descent music! Thank you!
I've not done alot of electrical stuff a tech when i was alot younger but watching this man videos has taught me how to some stuff . I love he put the remote into the grill and made it all look nice and factory.
*I have watched a lot of other videos for winch install before I found this one.. by far the best out there and what an awesome install sir! Neat, clean and setup perfectly for a long life of the wires and other components. Thank you so very much for a detailed video without all the un-needed BS!*
It's nice to see pride in workmanship. Excellent work.
Excellent workmanship on the install. You can tell you love what you do.
Thank you for saving me a couple hundred bucks. I was going to pay for my instal but these instructional videos have given me the confidence to proceed with the install myself. Well done Sir.
Great video! I love that you've edited out the little in between moments and parts that are easily skipped. And don't get me started on how clean your work is. Dammit! You set the bar for me, sir. I knew a German electrician who worked like you. So organized and clean. Excellent! Thank you for making the video!
This Man Takes Pride In His Work. Super Clean Install, Keep Up The Great Work!
Hello D-Ray, all the way from Australia. I just wanted to say how great your channel is and the quality of your very informative video's. As a young man, I would always shadow my father in his garage when he was tinkering around. Despite being an OR nurse by profession, I like to give everything a go. Be it my 2005 Cat Skid Steer, 2013 Husqvarna ride on, 2013 Yamaha WaveRunner, 2013 Suzuki KingQuad or my car. With a little help with learned experience, pdf workshop manuals or UA-cam channels like yours, I no longer have to bother my father on those late nights I enviably find myself playing with my toys in my shed. Thanks for putting out these videos. Cheers Paul.
Fantastic! If your shop was close by I'd have you install one for me. Nice job.
A little tip for wire splices. Raychem makes solder sleeves that have solder and water proof heat shrink all in one. Just strip wire over lap and use your heat gun. I use these in industrial applications. They are available in lots of sizes works great for things like this
Thank you D-Ray. I’m about to embark on this very project and your tutorial was excellent! Now I know just how to add a winch and switch for my UTV. 👍👍🙏
What a professional. Close enough ain't good enough for this guy. Outstanding work.
I love your videos… they are informative, well illustrated and very professional. I’ve learned so much from you. Thanks and continue the good work!
Sweet. Nice to see someone take pride in their work! I love to give my money to these type of people and hate to do business with half asses.
Very nice presentation and awesome example of workmanship
Now this is how you do an install video. I just installed a winch on my ATV and didn't find many for informative and as user friendly as this was. Great job!
Blair Boyce
Thank God for UA-cam. Seeing the real thing makes it easier than reading the wiring diagram.
Got some great little tips for protecting and hiding things.
I really enjoy your videos, Thank You!! I am a retired Aircraft Mechanic and have a little ATV / UTV repair shop in Hot Springs Village AR. Thanks again and keep those videos coming.....
Thanks! Much respect to you A and P folks.
Nice to see this old school attention to detail. It's getting to be a rarity nowadays. Good work, D-Ray.
My winch has instructions, but this was awesome to get an overview of how everything ties together.
Great work!
Very nice & clean install. Good example of if you’re going to do something, do it right.
Great job! I am installing my old ATV KFI winch on my new Ranger 570, what I was looking for was where you mounted the receptacle for remote switch, but I got a lot more good info for the install. I am doing the wiring today and I am impressed with your attention to detail. Thanks again!
Thanks for the great video. I've put a few of these on UTV's and generally miss the power wire. The idea of hooking it into the accessory circuit is great. Hopefully I can finish mine out now that I've seen a REAL installer do it.
Great video, love the way your dog keeps you company when you're working in the shop, Love it. Thank you for sharing the video.
Making it work is one thing... Making it work and look neat and clean is another... Great job.....
Thanks Ray! Nice to see a true professional who does quality work and with clear instructions.
Awesome, clean install. I love to see when people take pride in their work and do a quality job. If I lived in Arkansas I'd hire you guys every time. Thanks for the vid. I just bought a champion 2000lb for my atv...need to figure a clean way to install on old 97 yamaha warrior 350
I love that he shows every step and doesn’t cut it mid step or speed up
I wish you still made videos. You are the best on UA-cam with ATv stuff
Great video Ray. You sure made it simple. I love the way you assembled your wiring harness, it was very neat and tidy. Thanks for making things simple.
Very well made video with detailed instructions. Wish more people would take the time to go into the details as you did. Great job. Thank You.
Top shelf install, paying attention to detail is what is all about, thanks for posting the video!
Thanks for taking the time to make this really good clear video. Makes me feel like I can do this too. Just bought a winch for my UTV. It will be a slightly different install but the basics will be the same. Will try to make it as professional as yours…wish me luck. Cheers, Sunjay
Excellent video. My install is not quite as pretty as yours but almost. The directions that came with my winch were confusing. You made it simple. Thanks.
Very clean and neat install. Great pride of workmanship. Super cute dog too!
A little more explanation of the red wires you spliced coming from switches into the harness feeding the accessory outlet would have been useful, everyone always skips over that procedure.
Thank you for this!! I have a Linhai Bighorn 28 that I need to install a winch on and this was the spot on video that I needed!
Excellent video. This is clearly professional work. You take pride in your craft. I like it.
Nice install ! answered all my questions I had ,lol. Great ideas about how to shorten all this extra wire . Thanks.
Nice to watch a real professional at work.
brilliant work and very tradesman like. About to receive my winch and this has been very helpful. Very clear and concise explanation. Thanks so much for sharing 👍
3 years later, helped me out a lot! Nice video
D-Ray, you're just like me, someone who appreciates a clean professional install bud! Great video detail on this lil project!
Fantastic training video. Helped me to understand how to install winches on my ATV.
really good call using aux power with the fuse! it drives me nuts that there's no way to start the new atv's without electronics. makes me werey to go anywhere alone so i haven't rode it enough to even get first breakin oil changed yet. so i jus got a winch figure ill just plow snow in my drive way till i trust it. glad i found your vid cheers!
Its nice seeing someone who does not know how to take "short cuts". Great job.
Very nice install and explanation sir. Thank you.
Very neat install, it looks like it was made with the winch as standard :-).
I love cable ties, so dam handy for allsorts of jobs, even emergency bodgeups to get you home :-).
Heck yeah, zip ties and duct tape. A must have, lol!
Thanks D! I have a 450 over here in KY. Your videos are appreciated. PS your work is top quality, Sahn.
Great job, clean , professional. You have very clear and concise instructions
You should teach and a local High school, or technical college
You demonstrate the proper skills. (I use to teach). Looking forward to more videos.
Oh, video was superb
Good video. Easy to follow. I'm about to install a winch on my Kawasaki Mule 610. Your instruction is excellent.
Just the help I need. Installing new winch on a Honda Pioneer 700. Thank you.
Very good video, very informative. I like how you keep all the wiring neat and tidy. Very professional, thanks for sharing!!
D-Ray, the grand master! Love watching your stuff. haynes should hire you to do video manuals.
I appreciate the detail of this video. Thank you for taking the time!
You are a true craftsmen! Excellent work.
I just finished my install with you guiding the way... thanks again!!
Great video. I'm installing my first winch on my Honda pioneer 500. I'm definitely A rookie at this. Appr the info on how to shorten up the cables. Thks for sharing your knowledge 😊👍
Man did this clear up a lot of wiring questions I had Thanks for the video!
After watching your video, I think I can tackle this. Good job.
Great job on the install and the 2 part videos... It should be a GREAT help in mounting and wiring my Badlands 5000 lb. Winch ti my 2020 kawasaki mule sx fi 4x4... Thank you....
Top notch installation. Wish you were in Virginia
Excellent video and very helpful! I would love to see a schematic also. Not an illustration for people who don't understand electronics, but a real schematic diagram--including what is going on inside the contactor.
Thanks! Exactly what I needed to get my winch installed. Incredibly professional video. Well done.
What an excellent, clean install! Gave me lots of ideas to clean up the work of the previous owners winch install that I’m not happy with on my Polaris. Note: my black Lab is a bit more high-strung than your dog! Perhaps that’s because of all my swearing when I work though! 😉 Thanks for the great videos!
very nice..your very talented and the right tools are nice to have.great work
Impressive. Nice job. Thanks for sharing
Very well done how to video. Clean install , gave me some excellent, very professional ideas I can apply to my install.
Excellent work! Enjoyed it immensely. Never compromise quality work.
Appreciate the video. Thanks for some of the tips to make it look more professional.
Great Installation done with perfection awsome THANK YOU for taking the time.............Morley Schafrick...........Alberta Canada
Great explanation of everything. I like how you take the time to size all of your leads. Did you work in the aviation industry?
Good videos. Im going to start on my project of adding a winch to my 2018 Kawasaki Mule SX.
You always give it that little extra D-Ray touch!
Hell yeah man, kinda like a parts expert I used to work with.... ;)
Great instructional videos. Thanks for the lesson. I can’t wait to give it a try!
I enjoy your videos alot. I always like watching to see how others install, to see if there are any tricks or what not.
Did that contactor come with the Badlands Winch? I have the 2500# model, and it looks like 14 gauge wire was used and a single 50amp relay.
D Ray you are D Man! I'll bet you are a Patriot.
D-Ray this video is awesome. Very well done Sir!!!
Cheers for creating this video it has help me a lot with installing my winch.
Wow? What a Super Clean Super Nice install video. Easy to follow. I will be using your video to install my winch when it comes in next week. Thanks for video. Liked and Subbed
Thinking about doing this myself, great video!
Thanks for your detailed explanation for a custom layout of associated parts before cutting cabling and adding new connectors. However, the insulation on the higher gauged wires which drive their associated contactor coils are blue and green for my Superwinch LT 2500 ATV while I believe that the insulation on your winch are different colors. Please help me to better understand how to distinguish since no detailed definition
You made it look fun. I hope my install goes as well.
Very good video! Best explanations and commentary I've seen in a long time. Thanks
I will be mounting a winch on my polaris ranger this weekend and this going to help me with a professional looking install. Very informative. Thanks
Just found this video.........great job...a lot of inspiration there...
Great video! You do a great job explaining everything you're doing!!
Very neat, professional install.
Very nice install, clean as OEM !
Great assembly. Enjoyed the video.
I was wondering what box to use and where to get it from for 100 amp exposed circuit board on battery wire and solenoid circuit board, regular electrical box from home depot and larger electrical box for solenoid is perfect idea. Thanks !
Looks awesome 👍 one point I would make is to buy other colored electrical tap and use the colors accordingly so you can continue with the solid black all the way 🤷♂️ not that anything is wrong just to help make it look cleaner more of a personal preference than anything. Lol sorry just something I do and helps out.
Thanks for demo. Will proceed in a couple weeks on my Honda pioneer b700 4x4.
Very neat install, very informative, very professional, I like it.
Like always great job
Just need the rubber hook stopper in my opinion
Great job....PRO style all the way!! Thanks!!