PROJECTION OF PLANES_Recreated_Lecture 3 - Set Square with surface inclined to VP and edge to HP

[@ishangupta7387]

Thanks a lot sir! It's just because of your videos!
Students like me are going to pass Engineering Graphics! :)

[@ManasPatnaikofficial]

+Ishan Gupta
You are welcome Ishan...
I know this subject can become very complicated if you dont get that guidence..
Yeah i had difficulty with drawing when i was in college.....
But you guys dont have to go through that pain.....
The video lectures has been made in a very interactive and simple manner......
All the best

[@ishangupta7387]

Manas Patnaik Yes sir , its totally too simple to understand ☺️
You are doing great!
Please keep doing!

[@BeingExtraordinary08]

Please make video in hidi😌😌😭😭😭😭

[@balla4004]

@@ManasPatnaikofficial sir love you ❤️😍 give one reply that's enough for this day

[@ParuSParaDise]

Being a teacher, this class was so much helpful for me to explain to students... I'm Handling this subject after a long time of 11 years.. I have overcome that difficulty only through your video lectures . Thanks a lot sir🙏🙏🙏

[@ManasPatnaikofficial]

Glad it was helpful!

[@saarza9991]

Please teach properly, don't teach like our sir. He teaches us wrong even after watching Manas sir's videos. He himself don't know how to draw and teach. So we study from Manas sir only 😂

[@aryanjaiswal812]

Tysm sir during exam for students who are not going tuitions u are grt helper for us. Through ur videos our doubts gets clear easily.. once again tysm sir for help.

[@ManasPatnaikofficial]

Hi Aryan......First of all....Thanks for appreciating my work....
I always focus on giving you guys excellent quality free education....
All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....

[@ADITYAGAIKWAD]

7:51 why not we take point c' above line a' b'..... ??

[@arunkumar2113]

Sir you are really great because you share your knowledge without any cost in that time
I daily see your tutorial and in this time EG is for me
Very very thanks

[@santhoshkumarammu7168]

Sir i don't have idea about this topic after seeing ur video I have idea sir thank you so much sir

[@ManasPatnaikofficial]

You are most welcome Santhosh........All the very best
1. Engineering Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Mechanics Playlist (OLD): ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
3. Engineering Mechanics Playlist (NEW 2023-2024): ua-cam.com/play/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP.html
4. Mechanics of Solids Playlist: ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines / KOM / DOM Playlist: ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. AUTOCAD Playlist:
ua-cam.com/play/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G.html
7. Machine Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
Visit Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@NISHAThakre-p9f]

The end projection of line Ab are 40mm apart A is 12mm in front of the VP and 12mm above the H.P. The point B is 24mm in front of the VP and is 40mm above the H.P. locate the H.T. and V.T. of the line and also determine its inclination with the V.P. and H.P.

[@SASTAINSAAN]

Thank you sir.
In this lockdown your videos are really helping a lot to the student like me who are doing engineering.

[@yaswanthkosuru]

Really u different person who explain in easy manner

[@nitabarad3385]

Thank you so much sir. Earlier it was too hard to understand without any tutorial and classes but you made it too easy.

[@bhattimobinkhan7085]

Excellent brother
Your explanation is so good
And in very easy way
God bless you

[@svssairaju2371]

sir,i have a doubt you said in your previous video if they give inclined to hp assume that it is resting on hp buy in this case we are taking it on vp please give me clarity sir

[@pavandatta1766]

Literally sir im in love wid the way u make thingz easy sir.... And i mean it.

[@ManasPatnaikofficial]

Hi Pavan
Keep watching more and you will learn more and more....
Do watch all the videos on drawing and mechanics......
And also let your your friends know about this Channel so that they can also benefit.......

[@ayushvaishnav3029]

Sir, we can take c’ in any side in last stage after taking 30*

[@ManasPatnaikofficial]

+Ayush Vaishnav
Yes u can

[@Gautham987]

Can we take c 30 and b 60

[@Gautham987]

@@ManasPatnaikofficial sir can we take a 30 and b 60

[@surajtaru2499]

Yes.It is very helpful for all of us thank you sir for making videos

[@ManasPatnaikofficial]

Thanks for the appreciation Suraj....
All the best and do spread a word about this channel with your friends and classmates so that all can benefit.

[@sanjanamgsanjanamg3795]

No wors to say sir became a very big die fan of ur teaching . I was thinking like I'm weak and so I can't understand but ur vedio made me topper tq u so much
Love 🥰 from karnataka

[@sumonghosh7330]

It is not possible to draw projection without your videos thanks sir

[@NISHAThakre-p9f]

A 60° set-square of 125mm longest side is so kept that the longest side is in the H.P. make angle of 30° with the V.P. and set- square it self inclined at 45° to the H.P. Draw the prokection of set square.

[@ManasPatnaikofficial]

will make this video in 2 days
Thank u and all the best
😀Do share this channel and its playlist with your friends.
1. Engineering Drawing Playlist (ENGLISH): ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing Playlist (HINDI): ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics Playlist (OLD): ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Engineering Mechanics Playlist (NEW 2023-2024): ua-cam.com/play/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP.html
5. Mechanics of Solids Playlist: ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
6. Theory of Machines / KOM / DOM Playlist: ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
7. AUTOCAD Playlist:
ua-cam.com/play/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G.html
8. Machine Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Second Channel for Hindi Audience: @btechplus
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@shanukumar18]

Sir,very very good lectures are available for engineering drawing

[@lakshmisravani22boddu15]

Sir I have a doubt
Y can't we take that c' above in the 3rd step . Plz reply me sir

[@ADITYAGAIKWAD]

Same doubt bro

[@ADITYAGAIKWAD]

I got the ans..... U can take it as u wish...... Above or below..... Since it's projection down is same....!

[@srivalli9670]

Thankyou very much sir...u r simply amazing sir...once again thanks a lot sir...

[@nikunjlotiya3099]

Thanks a lot sir. Helped a lot🤎

[@rohitpanwar9306]

Q: 5 A 60° set-square of 125 mm longest side is so kept that the longest side is in the H.P. making an angle of 30" with the V.P. and the set-square itself inclined at 45° to the H.P. Draw the projections of the set-square.

[@aliakbarsoomro7995]

Thank you so much Sir for making these videos , if u were not In ED, then what happened to us 😬😬
Sir your videos are very helpful for us in university b/c there are a lot of teachers Who have a lot of knowledge but they don't have way how to share knowledge
U have knowledge as well and very important is the way how to share ED knowledge to others.
Great Sir.
Finally want to say thank you so much dear Sir for making these and make ED easy for us.

[@ManasPatnaikofficial]

May the Almighty shower all the success in your life......
Keep learning...,.. Stay blessed

[@nutanraval__1862]

Thank you so much dear sir ❤🤗

[@vinaykumarkusumanchi4517]

A 300 -600
set-square of 90 mm longest side is so kept that the longest side in the H.P making an
angle of 300 with the V.P and the surface inclined at 450
to H.P. Draw the projections of the setsquare.

[@mvssubrahmanyam]

Thank you so much sir
I also request you to make a video of tips and tricks(like that of making the edge perpendicular to the XY whose inclination is to be drawn in the third step),these sort of drawing tips just to revise before going to exam

[@sweberttm7713]

Sir, is it necessary for the 30° to be on the downside in stage 1?

[@ALPHA-fz1wo]

Yes, he is drawing in Top view

[@chandrashekar4084]

A square pyramid, base 40 mm and axis 65 mm, has the base on the HP, and all edges of the base are equally inclined to the VP. It is cut by a section plane perpendicular to the VP, inclined at 450 to the HP, and bisecting the axis. Draw its sectional top view and true shape of the section.

[@aayushthakur2508]

Hi. Is there a problem if we exchange a' and b'in the 3rd figure from the right (5th fig)?

[@ManasPatnaikofficial]

Absolutely not.....
It's your choice Aayush.....

[@anirudhasomkuwar9918]

Sir .. thankyou ..all of your videos are very helpful ...

[@ManasPatnaikofficial]

Hi Anirudha.....
Thanks for appreciating my work....
All the best in life...
And do let your friends know about this channel so that they can also benefit....

[@bavanaabhishith3835]

Thank you somuch sir . This is very useful to me and my friends 🥰

[@San-ff7ut]

in the first step, can we invert the set square, the 30 degree angle at the top and 60degree angle at the bottom? nothing is specified in the question where those angles should be right?

[@RandomBoy_0o0]

Sir at 7:00, do we randomly choose any point as b' on the 30 deg inclined line? And can we do it for any question of projection of planes? i.e. can we randomly choose a point about that inclined line in step 3 and start drawing from there?,and thankyou so much for the help.Your vids are awsome

[@ManasPatnaikofficial]

While choosing point b'....just make sure that Front view stays above xy line. Rest is fine Veerain.......You can infact mark Point b' first and then draw a line at 30 deg through it. Try it out..........
😀Do share this channel and its playlist with your friends.
1. Engineering Drawing Playlist (ENGLISH): ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing Playlist (HINDI): ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics Playlist (OLD): ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Engineering Mechanics Playlist (NEW 2023-2024): ua-cam.com/play/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP.html
5. Mechanics of Solids Playlist: ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
6. Theory of Machines / KOM / DOM Playlist: ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
7. AUTOCAD Playlist:
ua-cam.com/play/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G.html
8. Machine Drawing Playlist: ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Second Channel for Hindi Audience: @btechplus
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@RandomBoy_0o0]

@@ManasPatnaikofficial thankyou so much sir

[@chinmay568]

thank you so much bhaiyya!! it's a great help for us since our teachers don't teach us caed so nicely.... thanks a lot!!!

[@architjain811]

Sir, can we use the profile plane to make inclination with the V.P. in such cases?

[@JayaPrakash-zk5ep]

A square ABCD of 50mm side has its corner A in the HP, its diagonal AC inclined at 30
0
to the HP and the diagonal BD inclined at 45
0
to the VP, and parallel to the HP. Draw its
projections.

[@JayaPrakash-zk5ep]

Include this question also sir

[@jayavelt411]

your video clears many doubts for me,thank you very much,sir

[@ManasPatnaikofficial]

+JAYAVEL T
Hi Jayavel.....
Thanks for appreciating the content....
All the best and do let your friends know about this channel so that they can also benefit...

[@junaiddaruwale3392]

Thank you sir.
It is because of you I cleared my exam🙏🙏🙏🙏🙏

[@mrfaisu07jannat29]

8. A thin 30°-60° set-square has its longest edge in the V.P. and inclined at 30° to the H.P. Its
surface makes an angle of 45° with the V.P. Draw its projections.

[@manishgautam5385]

Sir in step 3 if we draw c point above the inclination line then our answer will be correct or wrong ..? please answer.

[@ManasPatnaikofficial]

Manish...Point c is a part of Top view....It will always be located below the xy line.....

[@narwadeswapnildhondibarao1231]

sir how to identify the digram starts for above xy line or below xy line?

[@ManasPatnaikofficial]

+Narwade Swapnil
The answer of your question lies in the video itself....
I would advise you to watch it once again....

[@narwadeswapnildhondibarao1231]

ok sir

[@chinnumahe7902]

Manas Patnaik sir kocham Telugu lo chapthara .digram xy line Pina vasthundhe lekapotha kinda vasthundhe .iam not understand iam very confusing that point please sir

[@chinnumahe7902]

Meru chapena 3 steps naku Telugu lo kavale sir

[@chinnumahe7902]

This month 28 I have an exame sir please reply sir

[@yesmarku]

Many many thanks to you sir, all you videos are beneficial to us..

[@ManasPatnaikofficial]

+Kumar Gurung
You are welcome Kumar...
All the best and do let your friends know about this channel so that thay can also benefit

[@devilking6979]

Sir in side inclination why u take c' point below 30degrees line . Can we take that point above 30degrees point ? plz ans sir plz.

[@shraddhasawant5687]

Thanks a lot sir for videos !
sir , In 3rd stage of given problem if we draw c' point above the inclination then answer is correct or wrong?

[@lakshmisravani22boddu15]

Same doubt

[@ADITYAGAIKWAD]

Same doubt bro!

[@ADITYAGAIKWAD]

Doubt is cleared..... U can take it both way.... As u wish......above or below..... Bcoz the projection for both is same!

[@ANGRYONEFF]

5.07 how can we see sir i can't understand

[@tarungupta5496]

Sir in the first step only can we place the set square in opposite manner like 30deg facing up and 60deg facing down ??

[@nairgopi6730]

At 7.37 when you make an arc why do you make it below what is the reason i made it above and the projection was different.? Please can anyone clear me thus doubt manas sir if you see this please clear it

[@apti_master]

Sir ur vdo is really amazing sir. I will score good marks in EG, after now bcoz ur vdo made me to understand the concept of EG

[@ManasPatnaikofficial]

All the best.
1. Engineering Drawing (English) :
ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
ua-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
ua-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
ua-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
ua-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
ua-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
ua-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
ua-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
ua-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
My AMAZON Store - For all you students.
www.amazon.in/shop/manaspatnaik

[@319vlsvsrinivas8]

Sir ..while drawing the final step will the angle made with vp can change sir????????.... , Please answer my questions sir

[@savasiva831]

No words simply superb sir thank u so much.....,Sir

[@ManasPatnaikofficial]

Hi Siva....Well Thanks for appreciating my work...
All the best in life
And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401
Small contributions can make a Big Difference

[@aashrithyellambhatla6331]

sir in 3rd stage the height of 'a' in front view doesnt change ,but diagram is misleading.please clarify sir.

[@ankushsonkar4164]

Sir why pointC in the 3rd diagrame cant be abobe a' -b' line ..... as u had marked it below a'-b' line....why so

[@abhijeetkushwaha424]

Would it be right if i took the figure differently. Like, i drew the set square interchanging the 30° and 60° angles.
Thanks 😊

[@ManasPatnaikofficial]

That is also correct....
Go ahead

[@mohkh653]

What if we cut the arch for c' above the a'b' line? Would that be right?

[@ManasPatnaikofficial]

Yes Haider..... You can do that certainly....
Go ahead

[@jamalsadiq1868]

sir can you tell me in the question does there is any condition that we have to assume that the set square is resting on vertical position

[@maheshlingamguntla8345]

Sir why we need to take arcs from b and a below why we should not take above

[@malikmalik3820]

I am going to write exam only by seeing your videos sir ... love u manas

[@ManasPatnaikofficial]

All the best..... Rock 🔛🤘

[@AshishSingh-kf2jd]

sir there is a problem that when the surface is making angle of 45 deg with vp then how it will appear line in top view as u have drawn for bc at 45 deg . my confusion is it should look plain in top view.....

[@AshishSingh-kf2jd]

ok sir its now clear actually i was rotating about corner point a in profile plain but actually it should be rotated about edge ab in horizontal plane

[@piyushupadhyay4981]

Thanks sir
You saved my grades

[@gneeraja5668]

Sir if shortest side is given and longest side makes an angle with hp will there be any changes in solving this

[@gokuj6361]

Sir can we take set square below xy instead of above as you did. I'm confused why you took it above the xy line...

[@adityaprakash6302]

No we can't take set Square below xy line because all the figures which are assumed parallel to VP are projected above xy line

[@mukashnaidurongala284]

Sir in the 3rd step while drawing c point .you have drawn down side of the BC. Why didn't you draw top side of bc

[@bharatrajsingh2182]

Sir I want to know jst one thing which is that....in tha last(3rd) step when we draw b' and a' points them why we make point c' below a'b' ...can we not make c' up from a'b'....in lecture no. 3

[@ManasPatnaikofficial]

yes u can Bharat...No problem......

[@bharatrajsingh2182]

Manas Patnaik ...okk thanks sir

[@Incognitotrader8]

Sir for whom should I assign naming a' for front view or top view and obviously the a b etc ?

[@saikalyaninduri7667]

For front view assign a' and b'

[@ganeshadsul2.091]

Sir why you do not draw the base of triangle on hp or parallel to hp why you draw the triangle horizontaly

[@khechar_19]

1. A thin 30°-60° set-square has its longest edge in the V.P. and inclined at 45° to the
H.P. Its surface makes an angle of 30° with the V.P. Draw its projections.

[@dasarisuneetha359]

How to draw set squar above reference line does not mention in this question

[@arshanjada2985]

thank u so much sir for the reply but for projection of plane that u hv to told me to search on u tube is there in ur channel so I can watch urs olny right and sir u will ne uploading more video or this one is last...Sorry for disturbing u again and again and thanks for the reply thank u so much

[@ManasPatnaikofficial]

Arshan Jada
Goto my channel page and onto playlists......there you will projection of planes.....lots of problems are there......watch them in sequence

[@binduseafoods7482]

Sir why we should not draw a set square perpendicular below the xylene

[@ramgopalraju897]

Sir,in the third step are lenghts of bc and ac corresponding to step1 r step2

[@ManasPatnaikofficial]

Its based on Step 2

[@muniraj8873]

Sir ,you are simply superb

[@veonreevesaldanha2355]

U r great sir!!!!I thought i will never be able to understand this.But it is all becuz of u sir that i can do it.😊😊😊

[@arulbalasachin2005]

sir why have you drawn the top view on the x y line

[@saikrishnareddy6641]

Tq... A... Lot sir for giving good explanation👍

[@MuhammadZahid-hd1hl]

Sir is that possible that in step 1 we take b'a' instead of a'b' which will alternate the set square but it the longest side remains perpendicular to the reference line ???

[@srushtipawar7]

According to question ,in 2nd step there should be inclination with HP 30 degrees and then surface inclination with VP 45 degree. But why its taken in 3rd step...?

[@harshchaturvedi9507]

Because it's surface is making an angle of45 Degrees with the v. p., and not it's edge

[@srushtipawar7]

@@harshchaturvedi9507 Ok...thanks a lott ! 😊

[@tushargupta971]

Sir during edge inclination why we put the point c' is below the line .....

[@ManasPatnaikofficial]

You can do it other way also. But make sure that edge is inclined......

[@tushargupta971]

Manas Patnaik Thanks sir

[@Sa-mj5ms]

Sir u are amazing ,mind blowing really

[@ManasPatnaikofficial]

Enjoy the videos Saba......

[@Sa-mj5ms]

Manas Patnaik ,Thank u soooo much sir .Ur videos made my studies too much easy for Engg.drawing

[@eitoes]

Sir I have exam tomorrow
I have one doubt . Is this 1st angle or 3rd angle of projection?
Please reply sir

[@anjaniburagadda9663]

Really a wonderful teaching I understood a lot ...thank you sir

[@ManasPatnaikofficial]

Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: ua-cam.com/video/WG6H2pISUzQ/v-deo.html
2. Projection of Point: ua-cam.com/video/fK4h5gM73w8/v-deo.html
3. Projection of Line:
OLD:
ua-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
ua-cam.com/video/pzE0D-Ijxd4/v-deo.html
4. Projection of Plane: ua-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: ua-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: ua-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: ua-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: ua-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: ua-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: ua-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: ua-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: ua-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
ua-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: ua-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: ua-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: ua-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: ua-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: ua-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: ua-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
ua-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
ua-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
ua-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: ua-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
ua-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: ua-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
ua-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
ua-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: ua-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html

[@milankargathara6376]

This video is very very useful for us 😇😇😇

[@bunty7273]

Sir ye wala plzzzzzzz.. A 30 deg. - 60 deg - set square has its shortest edge 50 mm long in v.p its surface is perpendicular to h.p and inclined to v.p such that its front view appears as an isosceles triangle draw its three views and determine its inclination with v.p...

[@eknathkavtakwar4319]

sir i have a question that, how our ans is correct, how to chek it in last after draw the problem

[@105_avantikameshram5]

Que. Composite plane consisting a equilateral triangle of 50 mm and a semi circle on one of its side with surface inclined at 45° to HP, while the diameter of the semicircle is parallel to HP and inclined at 60° to VP.
Can you please help me
I can't understand this question...
Plzzzz help me in solving this example earlier...!

[@iamcap10dj]

Thanks sir for supporting me

[@ManasPatnaikofficial]

+DHANANJAY PATIL
Always there for you guys to help.....
All the best Dhananjay....
And do let your friends know about this channel so that they can also benefit......

[@iamcap10dj]

Manas Patnaik sir thanks again

[@anchals2153]

What if we consider that the surface lie on hp.....will it be appropriate??

[@ManasPatnaikofficial]

Since the surface is inclined to VP, you have to assume that the entire surface is resting on VP.
Watch the first video in the playlist of projection of planes.

[@anchals2153]

@@ManasPatnaikofficial K

[@prathap.karaka]

sir in that problem may i take 30` angle 1st then 60` 2nd time?

[@sandyaperam731]

I think the step(iii) is inverted.Hope u'll correct it.

[@kishore5456]

Sir in edge inclination can v interchange a' & b' pts so that the c' comes at top

[@narasimha22]

Sir when we drawing with 30degree inclination we have cut the arc down of the line why can't we cut it upside

[@prem9469]

EVEN I HAVE THE SAME DOUBT GOT THE ANSWER?

[@the_little_instigator4107]

Its really understanding..Good lecture....Thank u very much

[@kireetinunna7253]

great explanation sir
very helpful sir

[@jayveersinhsolanki5085]

Sir can you explain how to make decision from which plane to start and in second stap which angle to use ...
Please sir

[@ManasPatnaikofficial]

Watch the first video in the playlist of projection of planes.

[@arshanjada2985]

sir is this last video of ED or many more to come

[@tudos9209]

sir can this prblm be solved by taking the projection intially from top view on HP rather than on VP?

[@do-able8591]

that God bless you SIr

[@nitind6215]

Ye auxillary method ni h n...??

[@retr0288]

While taking the point c u took it below ab line
Y not above?????
Btw luv ur videos reallllllly helpful

[@anjanaguruprasad1873]

Sir can you explain a locus problem

[@rohitc582]

Sir in the second step..y u not started with hp?

[@nairgopi6730]

Second step he started with surface inclination which is 45°with v.p and it can only be visible from top view thats y he started it with too view .