Dude I love your videos! I have only ever understood the most basic theory of pods and have wondered what and upward slant to pods would do, now I don't have to make the mistake of trying it. I'm so glad someone with your level of experience and expertise is taking the time to record and instruct the rest of us. I really wish my instructors in college had your teaching skill and relevant info!
Welded my pods on the other day after watching this video boat runs great with em on. only 1/2” of rise in the back runs great.was a lil scared to put em on after a bunch of forums I read but this video helped me decide to just do it thanks
Outstanding and full information on pods. Have an old 12' aluminum boat (a project) that I was considering investing in pods. Now I'm reconsidering. My boat's transom is curved and not angular. Your description of angle, location, displacement, drag, handling, etc., has me thinking that maybe I can solve the issue with equalizing weight distribution. I really appreciate the video.
I have a 1448 aluminum, rated for a 25hp...I have a 50hp Johnson, well, I decided it was going on the boat..I put the pods on, best thing i could have done. 2hundred pounds of lift..the beaver tail was made to fit my boat..
I have been planning to add pods to my boat for a while now. I was told it would affect steering and I wouldn't like them. Your video explains why and how to correct it. Would like to talk if possible just to get a better understanding and what design I should use. Thanks for an awesome video!
I really appreciate this! I'm building a small 13 and a 1/2 foot flats skiff that I'll be using to fish coastal flats. I'll be putting a 15 HP outboard on it and I want just a little extra buoyancy back there. Your video with the math calculations will help me build a set of pods that will be just the right size for the weight I want to displace so the back of my boat doesn't get swamped in rough water. Otherwise, I would have probably used the "bigger is better" - "go big or go home" method and built pods that were way too big. Thanks!
That was excellent. I went bowfishing for the first time a couple days ago. The boat owner I chartered was talking about adding pods. Now I understand why he wants to add them.
Great video. I have a Tracker XL that I’m putting a Jack Plate on that weighs 48 lbs. Two 230 lb fat white guys will be running this in the Alabama, Florida, Mississippi , and Louisiana marshes chasing red fish. The manual says it has an 11” draft. I have not put the boat in the water yet to figure the change in displacement with the jack plate. Saying that you have given me a lot to think of and saved me the hassle of pulling out my callus text and relearning derivations for volume.
I recently purchased a small v hull boat and have been try to dispute weight better on it do to issues getting on plane and not sitting level when in the water. I often wondered if pods would help me because I didn’t want big pods hanging off the rear. I made some cardboard mock ups for size reference to what I want with the goal off adding a couple hundred pounds of floatation this video helped a lot and I now think pods could really help me out
Great video, I’m buying my first Jon boat to trap out of, was looking at pods for it. I have only trapped out of McKenzie style drift boats in the past. Thanks for the info.
Great video because a lot of folks probably think theyre all the same! I will say its easy to find a successful pod install on someones boat where I live(everyone has them lol) so people who are looking to do this should always bring cardboard and tape and a sharpie to the ramps the. go home and welder up!😂 Subbed!😎
This is a fantastic video. You just got a subscriber here. Im trying to figure out if i want/need pods for my jon boat (coming soon) your video really cleared up a lot of questions for me.
Forgive the dumb question but do small boats not have outboard brackets available? A bracket can get you all the additional floatation without drag on plane but also gets your prop into cleaner water, has option of a swim platform and moving the outboard back can improve performance. It's a common upgrade on larger boats and I'd assume small boats would see similar benefits if available
It's not normal no. Outboard brackets aren't boat size specific but ive never seen one on less than a 2072. I have built a large center pod on a small boat. Kinda like a small hunt deck. I like that style but it wasn't really within the scope of the video.
would adding glue and doing a 💩 welding job work? I'm asking because I never welded anything but I was curious if I used glue, and welded "dots" all over if that would be sufficient?
Great info and thanks for taking the time to explain this. Makes a lot of sense! Have any suggestions on pods for a step down hull?? Would it make sense to mount the pods flush with the outside(highest sitting part of the boat)(for boat reference skeeter zx17)
We transfer from a 12 foot aluminum boat to our bay liner trophy 50 yards off shore on our bui Puget sound is no place to take a dip in the pool ! I filled two 10 foot vinyl gutter downspouts with spray foam for a different project that did not work .I have a big 2 handed riveter and i plan to rivet and epoxy them to the sides at the water line i dont think il extend them back 4 inches like i was thinking to many issues
Great video glad I came across it because it totally applies to a project I'm starting. Always have had boats on the great lakes Sea Rays Baja's , Zodiac etc, my Dad had a 12' Alumacraft that he used in his pond ( last registered in 1980 ) and it will barely fit inside my tow vehicle, 7.3 Box Truck, that we pull an RV with I thought I was done with boating but started watching videos and now I have the Bug! Ordered a Suzuki 20 4stroke 100lb and want to do a simple build? Lol ! I know, there is no such thing, but here is my problem, my original idea was to use trim tabs with adjustable turnbuckles for support brackets and pull pins to either fold them up or remove them, I have that part figured out, but if I need the extra bouyancy do you think a longer thinner removable adjustable pod might be practical? The other idea I am considering is an aluminum angle 1/4 x 2x2 or ? riveted along each side to keep the water from pushing out the sides kind of a tunnel hull effect. U R D Man!
Very imformative. I don't think I'm looking for speed and performance. A 14ft. jon, motor is 10 hp,100lbs + -,till steer and I'm 288lbs. Weight compensation for stabilty???
I'm fan of sponsons. They go on the sides to aid stability at hull displacement speeds, and are fully out of the water when on plane. Not so much to lift the back for an oversized outboard, though they will do that a little. Make the boat more stable, standing on a casting deck or when someone is boarding or getting off at the dock. Foam filled backup if you rip the hull open at 30 mph hitting a nearly sunken log. But that's a side effect, not the purpose.
Awesome video and very informative. So just to recap if I set the pods in towards engine and not flush with the outside and up off the water say a inch thats a good thing? If I angle just the back up it will cause it to porpoise. What's the difference between the two? Angled and fully raised. Fully raised wont porpoise like angled pods? Trying to get a better understanding seeing how im new to boats.
Very informative as are all your videos. I did not watch the entire thing, so I don't know if u addressed it, but...... .have you noticed that when pods are added, it creates somewhat of a void where the prop and ventilation plate are? I had to add a 6 inch set back and drop motor 4" to compensate for this. It's a mercury 4stroke, 40hp, quiet as can be, but once underway, it sounds like a Harley. Again, if u addressed this, link the time stamp.
Thanks for this video… Will adding the flotation pods effect the steering on a tunnel jet? I just purchased a used Alweld tunnel jet and it’s heavy in the rear. I want to add pods for all the reasons you covered. I called Alweld and they said it will make it hard to turn the boat cause it’s a jet and turns off momentum thrust.. What’s your thoughts?
I am about to instal the medium beavertail pods on a 1651 flat bottom. This will have a 22hp longtail on it. When i line everything up, i am about 1 3/8" rise off the flat bottom to the back of pod. Not 3/4. Do you think with that size boat and lower hp longtail motor i would have porpoising? Otherwise i have to shim the top out 1/2" to get the bottom to drop to 3/4. Please help! :)
excellent video thanks for sharing the knowlegde I learned alot: I have a 22' aluimiun deep V w/ a single engine pod 20" setback. this is a early 90s Armstrong pod it's so weird that they designed the pod to fill w/ water, I believe so saltwater would drain and not rot the stainless steel. instead of pods I'm wanting to widen my engine pod. seal it for extra floation add a bung to drain attach pods directly to existing engine pod around 1.25 cubic feet on each side, I'd like to add a kicker engine which is 120LBs. is there a way I can send you images of my plan? I have a thread at a boat design forum that has images of planned project if you'd like to take a look. Thanks Steve
Looking at pods for my 1436 tracker jonboat 15hp Yamaha electric start it’s ass end heavy and a bitch to take out by myself cant trim the front end down. The boat is rated for 15 hp and runs fine with my wife and son but alone I’ve thought of pails of water in bow. Would small backcreek pods help
by this same math/geometry will 8x8x8 boat pods work, that I will have to custom make? I know they won't displace much but I absolutely need them on my boat. The beaver tail pods (even the smalls) are way too big for my boat. it's a 14x55 (55 on top, 36 on bottom) so by this logic, they wont displace much but 8x8x8 will help. I am running an over 100lb surface drive mud skipper that swings very far to the sides with a reinforced transom (about 30-40 pounds) and I bowfish, currently sitting LOW. I need pods but no one makes what I need. Everything is too big.
Man O Man Great Video! Appreciate the Pod Class- Thanks Million- Off topic here but could you recommend option for not too expensive (weekend use) beginner tig welder? Maybe machine I could grow w/ a bit- Mainly as fishing guide & 2 aluminum jet boats that need repair from time to time - Thanks, jack
Dustin is it safe to tig weld modifications on an aluminum boat with an integral fuel tank in it? I just didn’t know if it could ground and spark inside the fuel tank. What’s your experience?
Don’t you have to subtract the weight of the pods for the final solution? I have my pods pulled up .5 inch and choked in 1 in from the sides and my boat is still able to ride on the pad with zero performance loss. Nice video!
1 ft. cubed = 64.2 lbs. 1 ft. cubed would be the internal measurements and the weight of the materials to build the pod is not included in the 64.2 lbs., would that be correct?
Thanks for the tips! My question is in regards to spacing off the sides. I went with the small beavertailpods for a 1442 alumicraft. They are slightly angled up as you mentioned. I will be running a surface drive mud motor so the prop will sit pretty far back past the pods. ( not the long tail but still past the pods. ) Thoughts on flush to side or Would you still step them in. Thanks!
@@WHITERIVERRAMBO interesting. Perhaps the layers gator glide that the entire boat ( including pods) will be receiving will help with this. I should not be making contact with anything in reverse since I do not have reverse! haha.
I have watched your video about 10x lol and i still have some questions about how i just installed my pods. I have not got the boat in the water yet so i have no idea wtf to expect. But long story short. I have a semi v hull. I decided to match the side and bottom profile of the boat. so the top of the pods are angled in toward the motor vs running horizontal with the transom top edge. Not a TON but they are angled down or in toward the motor. i also mounted them in 1 inch from the sides. and 1.5 inch up from the bottom. Did i screw myself?
also i have the back of the pod angled UP way more then most people say im talking INCHES vs less then a inch. I didnt want PERFORMANCE out of them but more of a little extra LIFE jacket effect if needed
Sir I love the rear side mount for a 12ft aluminum jon boat with 9.9 4 stroke for catfish and gar all weight in rear looking at 350lb what's good and thanks
Interesting. I put a 50hp on my 14ft fiberglass runabout. Its back heavy now especially with the heavy panther marine tilt and trim and 6 inch setback.
Great information, I’m interested in installing pods on my2020 bass tracker classic. I fish swallow water n I’m looking for a extra help on going to plane faster. Would you think pods would help on my tracker? Thank you
No. Displacement adds floatation. Foam is only for recovery of sunken watercraft. Pods should have a drain plug so you can check them occasionally for leaks.
Kenneth, I've checked out pods. was thinking of adding to a 12" aluminum boat. My understanding is there is no need for foam as the pods contain air. It's like you can float a sealed bottle in water. Pods installed are the same. Most are welded to the transom. The cap on top must be removed before welding. If bolted, the top must be cut off for installation then, welded back. Hope this is helpful.
I browsed through the comment section and you had mentioned about v-hull boats would be counter productive if pods are installed? I have an older hewescraft 16ft that is v on front but flat bottom on the rest. Was thinking of adding pods to make up the difference since a wanted a larger motor or upgrade to a 4stroke. Is it not a good idea to install pods then? Also the outboard is on a jackplate so it sticks out the motor an additional 5in away from the transom.
You mentioned if someone was a bass fisherman we wouldn’t need them pods. Now I am a bass fisherman and run a 14 ft v-hull Jon boat. I am building it into a bass boat. I would like to have a pair of these so I could get up in shallow water.
New guy here……. Just bought a 2008 G3 20x72 with a 2018 Yamaha Vmax 4 stroke. This is my first boat purchase. I’ve been thinking about adding pods. I could be wrong but, the boat seems kinda lite in the front especially when getting it on plane. I haven’t seen pods on a boat this size. Is it worth it? And does adding them increase your occupancy while on the water?
What is your take on pods for stability? I have a 17' aluminum Bass Tracker that I want to be a bit more stable while sitting in the water for saltwater fishing. I know that's not the intention of a Bass Tracker, but I have what I have.
Good info . Been building boats with and without pods for over 42 years most production on full planing Catamarans. You left out the importance of filling your pods with pour in foam. Pour in not for bouncy but for structural reasons. My current build I have designed a 55x22x18” pod fully filled with 2 pound pour in urethane foam. It is as solid as a rock and yes I can pee off of it with room to shake it off.
@@jimmiller4951 its a dam good thing they use foam cause ive seen more transoms ripped of a rangers on social media than any other manufacturer. that says a lot about them as a builder and their clientele as boat owners. There is no benefit of using foam in a boat accept for recovery of it after it sinks. they are regulated by the USCG to use foam. you are not.
@@WHITERIVERRAMBO you are so wrong on many levels . First of all I have produced hundreds upon hundreds and also been involved with R&D at one of OMC larger facilities doing multiple tests as to the structural value and displacement of urethane foam. Then went to building full planing Catamarans for Splendor Boats building hundreds of hand layups then 5 years repair mainly rigging and repairing for the Bass Masters . So Mr know it all without knowing it all , what you got other than a UA-cam platform ?. I will not argue with you simply because I know from experience not opinion. Foam builds structure and without it you have a weak boat. As for the so called weak Rangers that is the cause of overpowering and 12” Jack plates that were not properly installed. There is no record of the transom failing on one of their boats that was not altered . Like I said , I will not argue with you Sir.
@@jimmiller4951 i build aluminum boats from scratch. I know what a strong hull is. If you require foam for strength then you cut a lot of corners in your hull designs. I build boats that beat on rocks drag bottom and push through debris. In a hull with good structural integrity foam does nothing more than provide a sound damper and eventually break down to hold moisture witch will routinely add hundreds of pounds to a hull and kill performance. Accompany that with the enormous fire hazards that foam adds to a catastrophic wiring failure and a bad day could become much worse. I will never put foam in a hull or pod. My hulls will last for 100yrs after all the fiberglass has rotted back into the earth.
Thanks for sharing, it was most helpful. I do believe you may have a dyslexic mistake. One cubic foot equals 7.481 gallons. One gallon of water (the media we are displacing) = 8.34 lbs 7.481 x 8.34 = 62.39 62.4 not 64.2
Appreciate your video...what size pods would you recommend for a 14' long × 42" bottom, 55" top × 16" tall jon boat..I have 95 lb 1974 20hp mercury outboard and I weight in at 345...I'm just looking to stay afloat lol..
That's a pretty small craft for a big guy. Bet it's got a wood transom too.... I'd consider doing a full width pod. More of a "hunt deck" style. That would basically make the boat longer. If you make some pods make them as big as possible. The cost will ultimately scare you. It would be best to wheel and deal to find a wider hull with a 20" transom.
Do you have a whale tail on the anticavatation plate on the outboard? You could put a set of manual trim tabs on the transom or go to a metal supply place and get some aluminum sheets and make some pods to fit the transom.
It seems as tho pods should be mounted on a jack plate to make the most outa them. I've never had a set of them. Never thought about the steering drawbacks. But a jack plate would make the most of a set of pods , in my humble opinion anyway. It would add more weight and more mechanical parts as well I get that.
Does anyone have experience putting aluminum pods on a fiberglass skiff? I'm only 5 hp over the suggested size but I have built it from a plain hull had to glass in 4 wood stringers and a removable fiberglass floor added a 24 volt trolling motor so 2 batteries and a good size livewell and about to install an over motor platform needless to say more weight than it was meant for being a cheap skiff and I need flotation where I can get it was thinking to get them and have them powdercoated the same as my platform when I get that done has anyone seen how black powder coat holds up to being submerged in salt water? Any replies are appreciated
1100cc Inboard jet jon. Thats what I'm building. I figured angles on the inside of pods for steering? The rest is your engineering. Whats your thoughts?
So I just ordered some beavertail small pods for a grizzly flat bottom 1654 what do I need to do because I've got a 60 Mercury Bigfoot on it and it sags on the ass end bad
I have a 1648 that I want to waterfowl hunt out of, we will hunt three most of the time and im sure we’ll hunt four sometimes. I’ve got a 30 hp on it and our hunting group averages 245 lbs. how do I go about getting the right size pods for my boat
The excessive weight divided by 64 pounds will give you the additional cubic feet of flotation you need below water to get back to where you were before you added the excessive weight.
I remember buoyancy with engineers. Why does a concrete boat float? It will if it weighs less than the weight of the water it displaces. In layman's terms
If your waterline is 10" and you make your pods. 10" tall. Wouldn't the pods make your boat sit higher. So the waterline would no longer be at the top of the pods?
I would love to talk to you about the design on mine! I have a fabricator working on my 1860 alumacraft next week. Any chance you’d chat with me on the phone?
Good info; appreciate you sharing your experience. I'd welcome a follow up to discuss the pro's and cons of different mounting methods that you've considered... Example, you point out that mounting at an upward angle causes porpoising, moving left & up enables better steering (at the cost of reduced volume/buoyancy). You mentioned mounting so the top is just out of the water. What would happen if you mounted the top so it is below the waterline do? guessing little less buoyancy, maybe more drag (until you come on plane). What would changing the angle of the pod's back do? Thanks!
Loved the video but I have had just about enough of freedom units🤦. Alternatively you could just buy a metric tape measure. 10cm x 10cm x 10cm= 1 liter. 1 liter= 1kg of water. Math lesson over lol. Oh, unless you HAVE to convert that back to lbs. Simply multiply kg x 2.2. I've built a few boats, and did landscape construction and built pools for 25 years. Our system is so unbelievably stupid, it's actually pretty embarrassing
Dude I love your videos! I have only ever understood the most basic theory of pods and have wondered what and upward slant to pods would do, now I don't have to make the mistake of trying it. I'm so glad someone with your level of experience and expertise is taking the time to record and instruct the rest of us. I really wish my instructors in college had your teaching skill and relevant info!
that means the world to me brother. pass it on.
Welded my pods on the other day after watching this video boat runs great with em on. only 1/2” of rise in the back runs great.was a lil scared to put em on after a bunch of forums I read but this video helped me decide to just do it thanks
Good stuff! Attayboy🙌
Outstanding and full information on pods. Have an old 12' aluminum boat (a project) that I was considering investing in pods. Now I'm reconsidering. My boat's transom is curved and not angular. Your description of angle, location, displacement, drag, handling, etc., has me thinking that maybe I can solve the issue with equalizing weight distribution. I really appreciate the video.
I have a 1448 aluminum, rated for a 25hp...I have a 50hp Johnson, well, I decided it was going on the boat..I put the pods on, best thing i could have done. 2hundred pounds of lift..the beaver tail was made to fit my boat..
Top speed ?
Awesome video thanks
I have been planning to add pods to my boat for a while now. I was told it would affect steering and I wouldn't like them. Your video explains why and how to correct it. Would like to talk if possible just to get a better understanding and what design I should use. Thanks for an awesome video!
I really appreciate this! I'm building a small 13 and a 1/2 foot flats skiff that I'll be using to fish coastal flats. I'll be putting a 15 HP outboard on it and I want just a little extra buoyancy back there. Your video with the math calculations will help me build a set of pods that will be just the right size for the weight I want to displace so the back of my boat doesn't get swamped in rough water. Otherwise, I would have probably used the "bigger is better" - "go big or go home" method and built pods that were way too big. Thanks!
That was excellent. I went bowfishing for the first time a couple days ago. The boat owner I chartered was talking about adding pods. Now I understand why he wants to add them.
So much useful information. Thank you sir, you definitely made it make sense. Looking forward to putting my pods on this weekend
Great video. I have a Tracker XL that I’m putting a Jack Plate on that weighs 48 lbs. Two 230 lb fat white guys will be running this in the Alabama, Florida, Mississippi , and Louisiana marshes chasing red fish. The manual says it has an 11” draft. I have not put the boat in the water yet to figure the change in displacement with the jack plate. Saying that you have given me a lot to think of and saved me the hassle of pulling out my callus text and relearning derivations for volume.
Great information. Thank you for your time and effort to help.
Biggest reason for putting pods on the boat is to be able to piss out the back and not dribble in the boat!
🤣🤣🤣🤣💁♂️you're not wrong
I recently purchased a small v hull boat and have been try to dispute weight better on it do to issues getting on plane and not sitting level when in the water. I often wondered if pods would help me because I didn’t want big pods hanging off the rear. I made some cardboard mock ups for size reference to what I want with the goal off adding a couple hundred pounds of floatation this video helped a lot and I now think pods could really help me out
Great informative video. Lots of valuable information in regards to pods and proper installation.
Great video, I’m buying my first Jon boat to trap out of, was looking at pods for it. I have only trapped out of McKenzie style drift boats in the past. Thanks for the info.
Great video because a lot of folks probably think theyre all the same! I will say its easy to find a successful pod install on someones boat where I live(everyone has them lol) so people who are looking to do this should always bring cardboard and tape and a sharpie to the ramps the. go home and welder up!😂 Subbed!😎
This is a fantastic video. You just got a subscriber here. Im trying to figure out if i want/need pods for my jon boat (coming soon) your video really cleared up a lot of questions for me.
Great video and explanations! Thank you!
Glad it was helpful!
Excellent info and exactly what I was looking for thank you sir.
Forgive the dumb question but do small boats not have outboard brackets available? A bracket can get you all the additional floatation without drag on plane but also gets your prop into cleaner water, has option of a swim platform and moving the outboard back can improve performance. It's a common upgrade on larger boats and I'd assume small boats would see similar benefits if available
It's not normal no. Outboard brackets aren't boat size specific but ive never seen one on less than a 2072. I have built a large center pod on a small boat. Kinda like a small hunt deck. I like that style but it wasn't really within the scope of the video.
I got 14 feet flat bottom with a 60/40 on it I do need some on it. Thanks for helping me out
would adding glue and doing a 💩 welding job work? I'm asking because I never welded anything but I was curious if I used glue, and welded "dots" all over if that would be sufficient?
Your video gave me a great deal to think about. Very well presented.
Great information on pods . Going to try it on my boat. Thanks
Awesome video! Answered a lot of questions. But what do you think about float pods on a pontoon boat? Thank you
Great info and thanks for taking the time to explain this. Makes a lot of sense! Have any suggestions on pods for a step down hull?? Would it make sense to mount the pods flush with the outside(highest sitting part of the boat)(for boat reference skeeter zx17)
Fantastic explanation! Thank you very much.
How dare you bust out the math. This is very unacceptable. Good video keep it up.
We transfer from a 12 foot aluminum boat to our bay liner trophy 50 yards off shore on our bui Puget sound is no place to take a dip in the pool ! I filled two 10 foot vinyl gutter downspouts with spray foam for a different project that did not work .I have a big 2 handed riveter and i plan to rivet and epoxy them to the sides at the water line i dont think il extend them back 4 inches like i was thinking to many issues
Great video glad I came across it because it totally applies to a project I'm starting. Always have had boats on the great lakes Sea Rays Baja's , Zodiac etc, my Dad had a 12' Alumacraft that he used in his pond ( last registered in 1980 ) and it will barely fit inside my tow vehicle, 7.3 Box Truck, that we pull an RV with I thought I was done with boating but started watching videos and now I have the Bug! Ordered a Suzuki 20 4stroke 100lb and want to do a simple build? Lol ! I know, there is no such thing, but here is my problem, my original idea was to use trim tabs with adjustable turnbuckles for support brackets and pull pins to either fold them up or remove them, I have that part figured out, but if I need the extra bouyancy do you think a longer thinner removable adjustable pod might be practical? The other idea I am considering is an aluminum angle 1/4 x 2x2 or ? riveted along each side to keep the water from pushing out the sides kind of a tunnel hull effect. U R D Man!
Thanks for the information. I actually learned something today.
Very imformative. I don't think I'm looking for speed and performance. A 14ft. jon, motor is 10 hp,100lbs + -,till steer and I'm 288lbs. Weight compensation for stabilty???
I'm fan of sponsons. They go on the sides to aid stability at hull displacement speeds, and are fully out of the water when on plane. Not so much to lift the back for an oversized outboard, though they will do that a little.
Make the boat more stable, standing on a casting deck or when someone is boarding or getting off at the dock.
Foam filled backup if you rip the hull open at 30 mph hitting a nearly sunken log. But that's a side effect, not the purpose.
Would shake your hand if I could that cleared up so many questions.
Awesome video! I had to save it for future use. Thank you
Awesome video and very informative. So just to recap if I set the pods in towards engine and not flush with the outside and up off the water say a inch thats a good thing? If I angle just the back up it will cause it to porpoise. What's the difference between the two? Angled and fully raised. Fully raised wont porpoise like angled pods? Trying to get a better understanding seeing how im new to boats.
Very informative as are all your videos. I did not watch the entire thing, so I don't know if u addressed it, but...... .have you noticed that when pods are added, it creates somewhat of a void where the prop and ventilation plate are? I had to add a 6 inch set back and drop motor 4" to compensate for this. It's a mercury 4stroke, 40hp, quiet as can be, but once underway, it sounds like a Harley.
Again, if u addressed this, link the time stamp.
Thanks for this video… Will adding the flotation pods effect the steering on a tunnel jet? I just purchased a used Alweld tunnel jet and it’s heavy in the rear. I want to add pods for all the reasons you covered. I called Alweld and they said it will make it hard to turn the boat cause it’s a jet and turns off momentum thrust.. What’s your thoughts?
Just seeing this and you already want me to do math?!! You are mean!!🤨🤨.
Kidding. Great video! I learned something!
😁
I am about to instal the medium beavertail pods on a 1651 flat bottom. This will have a 22hp longtail on it. When i line everything up, i am about 1 3/8" rise off the flat bottom to the back of pod. Not 3/4. Do you think with that size boat and lower hp longtail motor i would have porpoising? Otherwise i have to shim the top out 1/2" to get the bottom to drop to 3/4. Please help! :)
I know nothing, but based on the video it all works as long as it's NOT over 1/2 inch
I just wanted to look cool at the boat ramp.
excellent video thanks for sharing the knowlegde I learned alot: I have a 22' aluimiun deep V w/ a single engine pod 20" setback. this is a early 90s Armstrong pod it's so weird that they designed the pod to fill w/ water, I believe so saltwater would drain and not rot the stainless steel. instead of pods I'm wanting to widen my engine pod. seal it for extra floation add a bung to drain attach pods directly to existing engine pod around 1.25 cubic feet on each side, I'd like to add a kicker engine which is 120LBs. is there a way I can send you images of my plan? I have a thread at a boat design forum that has images of planned project if you'd like to take a look. Thanks Steve
Looking at pods for my 1436 tracker jonboat 15hp Yamaha electric start it’s ass end heavy and a bitch to take out by myself cant trim the front end down. The boat is rated for 15 hp and runs fine with my wife and son but alone I’ve thought of pails of water in bow. Would small backcreek pods help
Thank you for the video. I’m a 290 pound man I wanna put pods on my boat. For a little more stabilization why fishing still .
by this same math/geometry will 8x8x8 boat pods work, that I will have to custom make? I know they won't displace much but I absolutely need them on my boat. The beaver tail pods (even the smalls) are way too big for my boat. it's a 14x55 (55 on top, 36 on bottom) so by this logic, they wont displace much but 8x8x8 will help. I am running an over 100lb surface drive mud skipper that swings very far to the sides with a reinforced transom (about 30-40 pounds) and I bowfish, currently sitting LOW. I need pods but no one makes what I need. Everything is too big.
Man O Man Great Video! Appreciate the Pod Class- Thanks Million- Off topic here but could you recommend option for not too expensive
(weekend use) beginner tig welder? Maybe machine I could grow w/ a bit- Mainly as fishing guide & 2 aluminum jet boats that need repair from time to time - Thanks, jack
do you usually brace the inside of the pods as some stiffening or leave it empty when you build pods?
Dustin is it safe to tig weld modifications on an aluminum boat with an integral fuel tank in it? I just didn’t know if it could ground and spark inside the fuel tank. What’s your experience?
Don’t you have to subtract the weight of the pods for the final solution?
I have my pods pulled up .5 inch and choked in 1 in from the sides and my boat is still able to ride on the pad with zero performance loss.
Nice video!
Very good discussion
Wow super interesting video. Thanks
I want to make one solid pod extension and move the motor back?
I've done it. It's not terrible
1 ft. cubed = 64.2 lbs. 1 ft. cubed would be the internal measurements and the weight of the materials to build the pod is not included in the 64.2 lbs., would that be correct?
Yeah that's right. Subtract the weight of the materials.
Thanks for the tips! My question is in regards to spacing off the sides. I went with the small beavertailpods for a 1442 alumicraft. They are slightly angled up as you mentioned. I will be running a surface drive mud motor so the prop will sit pretty far back past the pods. ( not the long tail but still past the pods. ) Thoughts on flush to side or Would you still step them in. Thanks!
Flush to the sides, flush to the bottom. Don't hit anything with those .100 beavertail pods they will open up like a tuna can.
@@WHITERIVERRAMBO interesting. Perhaps the layers gator glide that the entire boat ( including pods) will be receiving will help with this. I should not be making contact with anything in reverse since I do not have reverse! haha.
I have watched your video about 10x lol and i still have some questions about how i just installed my pods. I have not got the boat in the water yet so i have no idea wtf to expect. But long story short. I have a semi v hull. I decided to match the side and bottom profile of the boat. so the top of the pods are angled in toward the motor vs running horizontal with the transom top edge. Not a TON but they are angled down or in toward the motor. i also mounted them in 1 inch from the sides. and 1.5 inch up from the bottom. Did i screw myself?
also i have the back of the pod angled UP way more then most people say im talking INCHES vs less then a inch. I didnt want PERFORMANCE out of them but more of a little extra LIFE jacket effect if needed
I assume that backing up is quite different also... with the pods on. Great class, thanks.
Nah. You probably never tell the difference there.
Sir I love the rear side mount for a 12ft aluminum jon boat with 9.9 4 stroke for catfish and gar all weight in rear looking at 350lb what's good and thanks
Would pressurized pods increase bouyancey?
NO. Vessel pressure does NOT effect displacement.
Interesting. I put a 50hp on my 14ft fiberglass runabout. Its back heavy now especially with the heavy panther marine tilt and trim and 6 inch setback.
You called it. My boat is about 9 inches deep in water at back
Great information, I’m interested in installing pods on my2020 bass tracker classic. I fish swallow water n I’m looking for a extra help on going to plane faster. Would you think pods would help on my tracker? Thank you
I’m going to ask a stupid question. Would it be worth my time to put foam in the pods
No. Displacement adds floatation. Foam is only for recovery of sunken watercraft. Pods should have a drain plug so you can check them occasionally for leaks.
Kenneth, I've checked out pods. was thinking of adding to a 12" aluminum boat. My understanding is there is no need for foam as the pods contain air. It's like you can float a sealed bottle in water. Pods installed are the same. Most are welded to the transom. The cap on top must be removed before welding. If bolted, the top must be cut off for installation then, welded back. Hope this is helpful.
My math teacher was right, some day I'd use what I'd learned in class..
Literally the only subject I use everyday.
Great info. Thank you.
Well done, even a hilljack like myself could follow your math, big thumbs up.
I’m building a 1448 flat bottom boat. I went with the small beaver pods. Should have I went with medium?
I browsed through the comment section and you had mentioned about v-hull boats would be counter productive if pods are installed? I have an older hewescraft 16ft that is v on front but flat bottom on the rest. Was thinking of adding pods to make up the difference since a wanted a larger motor or upgrade to a 4stroke. Is it not a good idea to install pods then? Also the outboard is on a jackplate so it sticks out the motor an additional 5in away from the transom.
awesome thankyou
You mentioned if someone was a bass fisherman we wouldn’t need them pods. Now I am a bass fisherman and run a 14 ft v-hull Jon boat. I am building it into a bass boat. I would like to have a pair of these so I could get up in shallow water.
That's not ideal. The V will bottom out before the rest of it. Your plan is counter productive.
New guy here……. Just bought a 2008 G3 20x72 with a 2018 Yamaha Vmax 4 stroke. This is my first boat purchase. I’ve been thinking about adding pods. I could be wrong but, the boat seems kinda lite in the front especially when getting it on plane. I haven’t seen pods on a boat this size. Is it worth it? And does adding them increase your occupancy while on the water?
Look up Lenco trim tabs. That will help you keep the nose down.
Man alive what a good video sir
Wow ok that was alot. Now I'm thinking I need to have my pods custom built and installed by a professional :(
Great video! Thanks. I want To install pods on my classic gheenoe
I am going to make a pair from Plywood and fiberglass. Will save over $100 compared to beavertail small, and will be the size I need exactly
No don't do that lol
Good video, well explained, but density of water is 62.4 #/ cu. ft. Small difference.
What is your take on pods for stability? I have a 17' aluminum Bass Tracker that I want to be a bit more stable while sitting in the water for saltwater fishing. I know that's not the intention of a Bass Tracker, but I have what I have.
Pods do not add roll stability. Only hull width does that. You need a 72" wide hull for maximum stability on big water.
Good info . Been building boats with and without pods for over 42 years most production on full planing Catamarans.
You left out the importance of filling your pods with pour in foam. Pour in not for bouncy but for structural reasons. My current build I have designed a 55x22x18” pod fully filled with 2 pound pour in urethane foam. It is as solid as a rock and yes I can pee off of it with room to shake it off.
Foam should never be used in a boat. NEVER.
@@WHITERIVERRAMBO tell that to Ranger boats and see what they say
@@jimmiller4951 its a dam good thing they use foam cause ive seen more transoms ripped of a rangers on social media than any other manufacturer. that says a lot about them as a builder and their clientele as boat owners. There is no benefit of using foam in a boat accept for recovery of it after it sinks. they are regulated by the USCG to use foam. you are not.
@@WHITERIVERRAMBO you are so wrong on many levels . First of all I have produced hundreds upon hundreds and also been involved with R&D at one of OMC larger facilities doing multiple tests as to the structural value and displacement of urethane foam. Then went to building full planing Catamarans for Splendor Boats building hundreds of hand layups then 5 years repair mainly rigging and repairing for the Bass Masters .
So Mr know it all without knowing it all , what you got other than a UA-cam platform ?.
I will not argue with you simply because I know from experience not opinion. Foam builds structure and without it you have a weak boat.
As for the so called weak Rangers that is the cause of overpowering and 12” Jack plates that were not properly installed. There is no record of the transom failing on one of their boats that was not altered .
Like I said , I will not argue with you Sir.
@@jimmiller4951 i build aluminum boats from scratch. I know what a strong hull is. If you require foam for strength then you cut a lot of corners in your hull designs. I build boats that beat on rocks drag bottom and push through debris. In a hull with good structural integrity foam does nothing more than provide a sound damper and eventually break down to hold moisture witch will routinely add hundreds of pounds to a hull and kill performance. Accompany that with the enormous fire hazards that foam adds to a catastrophic wiring failure and a bad day could become much worse. I will never put foam in a hull or pod. My hulls will last for 100yrs after all the fiberglass has rotted back into the earth.
Thanks for sharing, it was most helpful. I do believe you may have a dyslexic mistake. One cubic foot equals 7.481 gallons. One gallon of water (the media we are displacing) = 8.34 lbs
7.481 x 8.34 = 62.39 62.4 not 64.2
Yeah you're right. Thanks for pointing it out.
Everything you say about steering I get, what about a long tail???
Never had a Longtail but they pretty much don't care but their performance can be increased by the boat wake coming together at the prop.
I would think this would be most beneficial to duck hunters
Very good video
Appreciate your video...what size pods would you recommend for a 14' long × 42" bottom, 55" top × 16" tall jon boat..I have 95 lb 1974 20hp mercury outboard and I weight in at 345...I'm just looking to stay afloat lol..
That's a pretty small craft for a big guy. Bet it's got a wood transom too.... I'd consider doing a full width pod. More of a "hunt deck" style. That would basically make the boat longer. If you make some pods make them as big as possible. The cost will ultimately scare you. It would be best to wheel and deal to find a wider hull with a 20" transom.
@@WHITERIVERRAMBO yeah..I'd probably be better off keeping this one in a pond lol...thanks for the advice and response...
Do you have a whale tail on the anticavatation plate on the outboard? You could put a set of manual trim tabs on the transom or go to a metal supply place and get some aluminum sheets and make some pods to fit the transom.
Can i put pods on my 1988 17 foot bass tracker i got a drain or pump hole at the bottom could they weld above it
I’m try to send pics so you can see
You can not post pictures on UA-cam. Yes I know what you are saying. I cut those out & put a new on in the center of the boat.
@@WHITERIVERRAMBO you put pods on if so what state you in
@@jonathanwombles5004 Whiteriverrambo Customs is located in Salem Indiana
Thank I’m from Indianapolis
It seems as tho pods should be mounted on a jack plate to make the most outa them. I've never had a set of them. Never thought about the steering drawbacks. But a jack plate would make the most of a set of pods , in my humble opinion anyway. It would add more weight and more mechanical parts as well I get that.
Does anyone have experience putting aluminum pods on a fiberglass skiff? I'm only 5 hp over the suggested size but I have built it from a plain hull had to glass in 4 wood stringers and a removable fiberglass floor added a 24 volt trolling motor so 2 batteries and a good size livewell and about to install an over motor platform needless to say more weight than it was meant for being a cheap skiff and I need flotation where I can get it was thinking to get them and have them powdercoated the same as my platform when I get that done has anyone seen how black powder coat holds up to being submerged in salt water? Any replies are appreciated
You're going against the grain in many ways. Get a bigger motor & a bigger boat.
1100cc Inboard jet jon. Thats what I'm building. I figured angles on the inside of pods for steering? The rest is your engineering. Whats your thoughts?
it won't turn.
Have you seen anyone put pods on a deep fee Crestliner Sportfish?
Side mounted float pods?
👎 NO
So I just ordered some beavertail small pods for a grizzly flat bottom 1654 what do I need to do because I've got a 60 Mercury Bigfoot on it and it sags on the ass end bad
Return those junk things & find a quality fabricator to build you a set of quality pods.
Well done, sir. Well done!
I have a 1648 that I want to waterfowl hunt out of, we will hunt three most of the time and im sure we’ll hunt four sometimes. I’ve got a 30 hp on it and our hunting group averages 245 lbs. how do I go about getting the right size pods for my boat
The excessive weight divided by 64 pounds will give you the additional cubic feet of flotation you need below water to get back to where you were before you added the excessive weight.
Amazing vid brother ❤
Thanks 🔥
I run to big of a motor on my 14 foot aluminum,that is why I need pods.
No such thing.
I remember buoyancy with engineers. Why does a concrete boat float? It will if it weighs less than the weight of the water it displaces. In layman's terms
If your waterline is 10" and you make your pods. 10" tall. Wouldn't the pods make your boat sit higher. So the waterline would no longer be at the top of the pods?
Yes exactly. But that little extra isn't excessive.
Good video 👍
I would love to talk to you about the design on mine! I have a fabricator working on my 1860 alumacraft next week. Any chance you’d chat with me on the phone?
Good info; appreciate you sharing your experience. I'd welcome a follow up to discuss the pro's and cons of different mounting methods that you've considered... Example, you point out that mounting at an upward angle causes porpoising, moving left & up enables better steering (at the cost of reduced volume/buoyancy). You mentioned mounting so the top is just out of the water. What would happen if you mounted the top so it is below the waterline do? guessing little less buoyancy, maybe more drag (until you come on plane). What would changing the angle of the pod's back do? Thanks!
Great content
Is there a big loss in top end speed with pods?
Generally less than 2mph
@@WHITERIVERRAMBO
Thanks. I really appreciate your video and replies.
@@WHITERIVERRAMBO what if your going up from 40 hp to 55hp
@@alabamaoutdoors4468 nobody ever regretted adding HP to a boat.
@@WHITERIVERRAMBO it's a 1642 flatbottom current 40 hp mariner/Yamaha thinking pods and putting my 79 model evinrude 55 hp on it ?
Loved the video but I have had just about enough of freedom units🤦. Alternatively you could just buy a metric tape measure. 10cm x 10cm x 10cm= 1 liter. 1 liter= 1kg of water. Math lesson over lol. Oh, unless you HAVE to convert that back to lbs. Simply multiply kg x 2.2. I've built a few boats, and did landscape construction and built pools for 25 years. Our system is so unbelievably stupid, it's actually pretty embarrassing