How to Wire Your 92-95 Civic Ignition to a Switch Panel (Brand - RaceSpec) Kseries EG Build "Tonka"

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 33

  • @vladimirdelcin819
    @vladimirdelcin819 Рік тому +6

    Great information I think this the only video like this for Hondas I’ve seen so thank you for sharing with the community.

  • @themadoct
    @themadoct 2 роки тому +2

    G.m slayer .gunner fam top off the morning brotha.no cap I'ma watch this vif all day all week it's a essential.i need to do this to my hatch.thank for such amazing vid.🙏🔫mad love brotha.was a pleasure to meet you at pr. BBQ giveaway one love brotha 🔫

    • @slayerzracing
      @slayerzracing  2 роки тому +1

      🔫🔫🔫🔫 Glad to help and it was an Honor bro

    • @themadoct
      @themadoct 2 роки тому

      @@slayerzracing ,🙏🙏🔫👑

  • @AlexTorres-us1dt
    @AlexTorres-us1dt 8 місяців тому +2

    So you don’t need fuse or anything like that just wire it just like you did ? I just have fuel pump , push starter, and ignition
    switch everything else will stay oem -

    • @slayerzracing
      @slayerzracing  8 місяців тому

      Yes that's correct, I have had others do the same, one example is on a circuit Integra.
      To my knowledge, all we are doing is changing the switch style, the fuses and such stay the same if kept like oem

    • @slayerzracing
      @slayerzracing  8 місяців тому

      I should mention, depending on the setup and person.
      If you are just wanting a Push to Start, a company called "JDI" - Jordan Distributors Inc. offers a Plug and Play Push Start as well as other things
      I am unsure of other brands but the switch panels seemed to come wired for street use, so you can do 3 switches for different "Key Clicks"
      EXAMPLE:
      1st switch - Accessories
      2nd switch - Ignition 1
      3rd switch - Ignition 2
      So if you wanted to listen to the radio, you didn't have power to everything else too.
      If I can recall, I showed that I rewired my panel so I have a "Main Power Switch" to kill everything else is and when needed.

  • @angelsanchezjr8480
    @angelsanchezjr8480 2 роки тому +1

    Keep up the great work brother. Much love and respect

  • @Gunner_Calvin
    @Gunner_Calvin 2 роки тому +2

    Hell yea bro! Love seeing more of us do shit!🔫🔫🔫🔫🔫

  • @joeyc4141
    @joeyc4141 Рік тому +1

    Awesome video! Very informative! Thanks brother! 🔫❤️

    • @slayerzracing
      @slayerzracing  Рік тому

      🔫❤️🌎🙏🏽 Glad you liked it and hope it helps bro!

  • @hatchkid91
    @hatchkid91 2 роки тому +1

    So much awesome information thanks for sharing with us 🔫

  • @bryanteko
    @bryanteko 2 роки тому +1

    Yerrrr!!!!!!!

  • @nfig6750
    @nfig6750 7 місяців тому +1

    Does this works with any switch panel because that one is out of stock?

    • @slayerzracing
      @slayerzracing  7 місяців тому +1

      Yes it should, The Switches should be the same just a different brand.
      They should have Power, Signal and Ground and probably need rewired also. (If you want a "Master Main Power" to kill everything in one push)
      The base wiring setup I believe they come wired as is for street cars.
      Example, so you can be parked and have your Accessories wired to a switch alone. Listen to music without anything else on.
      Everything wired to their own switch and not all killed by a "master main power switch"
      Example, key turns
      1st Key Click - Acc (Switch 1)
      2nd Key Click - Ignition 1 (Switch 2)
      3rd Key Click - Ignition 2 (Switch 3)
      That is to my knowledge and understanding on how the switch panels get pre-wired and shipped

    • @nfig6750
      @nfig6750 7 місяців тому +1

      @@slayerzracing great info, I appreciate your time!!! Thanks

  • @rajaebrooks8805
    @rajaebrooks8805 4 місяці тому +1

    Can this same process of wire connect to strip led

    • @slayerzracing
      @slayerzracing  4 місяці тому

      Yes you can if you want a toggle switch to control your LED Light Strip
      The light strip should be 2 wires
      1~ Power
      1~ Ground
      You can wire the Ground wire to the chassis or to the nearest harness 10mm ground just put a wire end or an eyelet on the end of your ground wire.
      The Toggle Switch will have 3 Terminals if it's similar to my toggle switches
      1~Power (Hooked Up to 12V Source)
      1~Signal (Hooked to Power Wire of Component you want to power)
      Ex. Your LED Light Strip
      1~Ground (Ground to Chassis or Nearest Harness Ground)

    • @slayerzracing
      @slayerzracing  4 місяці тому

      I forgot to mention, also a "Inline fuse" should be added in-between the toggle switch and the 12v power.
      If the 12v power isn't already controlled/assisted by a fuse.

  • @axelrodriguez4732
    @axelrodriguez4732 Рік тому +1

    Where and How did u run the signal wires??

    • @slayerzracing
      @slayerzracing  Рік тому

      Whats up, I ran the signal wires under the dash similar to the OEM harness, its still just mocked up until I get everything wired in, then I'll go back and clean it up

  • @vladimirdelcin819
    @vladimirdelcin819 Рік тому

    Do you a video of the other accessories being wired in ?

    • @slayerzracing
      @slayerzracing  Рік тому +1

      I have this ignition video and a video wiring up headlights/running lights. Other than that, no I do not.

  • @RhdEji
    @RhdEji 2 роки тому +1

    🔫🌎

  • @KrashoutJJ
    @KrashoutJJ Рік тому +1

    what switch panel is this ?

  • @spooksz1150
    @spooksz1150 2 роки тому +1

    🔫🔫🔫🔫

  • @AlexTorres-us1dt
    @AlexTorres-us1dt 8 місяців тому

    It’s track car so no radio