Excellent guide. Thanks, it literally took me 10 minutes to remove the centre console after watching this video but i found it easier to remove the upper console section top first !
What a great and simple but informative video. Helped me so much when taking the centre console out to look at the Auto gear linkage. Had my Boxster 4 years and didn't even know I had a coin holder lol. Thank you very much :)
Nice vid man and enjoyed the spray job vid as well. Having a go at mine this summer. Thanks for posting Given me more belief I can attempt some of these projects.
Hi Steve, yes I still have the 986, going in for a full repaint in May. I have been so busy I just haven't had much time, then of course we had all this lockdown malarkey. but I am hoping to get back to making a few videos in the summer.
Thanks des, good to be back, hard work just finding the time, lol. working on the latest video, big one at almost 40 minutes! 2 weeks spent editing, should be up on Tuesday...….. I hope! lol
Paul1962 Awesome! I look forward to it. I also am time poor and have not been driving the Porsche much. I have taken it out only twice in the last few months. I must find the passion again. Hopefully your videos will do it. 😀
A point worth noting Paul, the faceilft 986 also has a wire to the lock on the storage compartment as it locks with the centre locking. Just as an aside , I might be wrong but I'm not sure that the ashtray lid and all the window switch surround gubbins was painted if you originally asked for centre console in body colour from Porsche ? deffo not the ashtray lid Mike
On my 2005 986 the previous owner sprayed the interior white (And the cars wrapped in white) but the roof switch has 'popped off' inside the consol - maybe they damaged it when taking it apart. Either way I do I have to remove the entire consol to fetch the switch out? Any advice would be appreciated.
Hi, you should be able to get the upper panel out without removing the console, mine is the earlier car, I can access the roof switch by taking the radio out, think this maybe the heater panel in yours
Hi Paul, my buddy is a tech at my local Porsche dealer. When I mentioned I was thinking of painting my console he said to get a clear bra put over it because the console will get scratched. Something to think about.
Hi, they just unclipped, I can't remember exactly how now, but they were bloody tight. If you can give me a day or two I will lift out the switch panel and see if it jogs my memory
@@nicklee7171 I found this video this morning, ua-cam.com/video/7-Mro3ilumA/v-deo.html Should help you. There are 2 little lock tabs on the sides of the switch, up inside the housing, which is why he is springing the housing apart. he shows you how to repair a switch should you brake one getting it out, also I have a spare switch should you need one. I'm replacing all the bonnet/boot gas struts later today. (once I get my ass out of bed, lol)
![🛠 How to remove the center console on a Boxster 986 or a Porsche 996 DIY [Eng sub]](http://i.ytimg.com/vi/iCAT-ovBSnk/mqdefault.jpg)
Thanks Paul. We would have been screwed without this video. Painting one today Speed Yellow.
Your welcome, glad it was helpful.
Excellent guide. Thanks, it literally took me 10 minutes to remove the centre console after watching this video but i found it easier to remove the upper console section top first !
Glad to hear you found it helpful, thanks for watching and supporting the channel, video coming shortly on changing the discs and pads.
What a great and simple but informative video. Helped me so much when taking the centre console out to look at the Auto gear linkage. Had my Boxster 4 years and didn't even know I had a coin holder lol. Thank you very much :)
Thanks, Steve, glad you found it helpful
Nice vid man and enjoyed the spray job vid as well. Having a go at mine this summer.
Thanks for posting Given me more belief I can attempt some of these projects.
Glad you enjoyed the videos and find them helpful
Good detail, just what I needed to make sure I can do the job right. Thank you!
Hi, glad to hear it was helpful, thanks for watching
Come back miss your page have you still got your 986 ?
Hi Steve, yes I still have the 986, going in for a full repaint in May. I have been so busy I just haven't had much time, then of course we had all this lockdown malarkey. but I am hoping to get back to making a few videos in the summer.
Thanks man, Your vids are ace.
Thanks, glad you liked it.
great vid, thanks for going through the trouble of making it, it helped me a lot!
Your welcome, glad it was of help
What a really informative video! Showed me exactly what I wanted to know. Fantastic thank you👍.
Hi, glad you enjoyed it and found it helpful
Little Battery driven Power driver make the job much easier
Side panels on 987 (997) have a small cover with 1 screw) and another cove with 2 screws)
Maybe one day I will invest in one, lol
Good to see you back Paul. 😀
Thanks des, good to be back, hard work just finding the time, lol. working on the latest video, big one at almost 40 minutes! 2 weeks spent editing, should be up on Tuesday...….. I hope! lol
Paul1962 Awesome! I look forward to it. I also am time poor and have not been driving the Porsche much. I have taken it out only twice in the last few months. I must find the passion again. Hopefully your videos will do it. 😀
I will try my best to inspirer you! lol
Turned out well
A point worth noting Paul, the faceilft 986 also has a wire to the lock on the storage compartment as it locks with the centre locking.
Just as an aside , I might be wrong but I'm not sure that the ashtray lid and all the window switch surround gubbins was painted if you originally asked for centre console in body colour from Porsche ? deffo not the ashtray lid
Mike
Mike G, hi Mike, so dose mine, but that bit of footage came out shit! So it didn't make the final cut, lol
Mike G, not to sure, all the ones I've looked at are painted, but no one will open up to whether they are original or not
Mike G hi there
Hi Malc !!
On my 2005 986 the previous owner sprayed the interior white (And the cars wrapped in white) but the roof switch has 'popped off' inside the consol - maybe they damaged it when taking it apart. Either way I do I have to remove the entire consol to fetch the switch out? Any advice would be appreciated.
Hi, you should be able to get the upper panel out without removing the console, mine is the earlier car, I can access the roof switch by taking the radio out, think this maybe the heater panel in yours
Thanks Paul. I'll have a look at it Thursday and let you know how I get on... let's hope it's a simple fix :)
Hi Paul, my buddy is a tech at my local Porsche dealer. When I mentioned I was thinking of painting my console he said to get a clear bra put over it because the console will get scratched. Something to think about.
Alxx Nova would that be clear plastic protective film?
PPF Paint Protection Film
yeah, a clear wrap might be a good idea to help protect it
Yep. The clear wrap you put on the front, or whole car.
Paul how do you remove the switches? Your video and the next video don’t show how you do this?
Hi, they just unclipped, I can't remember exactly how now, but they were bloody tight. If you can give me a day or two I will lift out the switch panel and see if it jogs my memory
@@Paul1962 waiting to hear. It’s the last step before I paint.
@@nicklee7171 I found this video this morning, ua-cam.com/video/7-Mro3ilumA/v-deo.html Should help you. There are 2 little lock tabs on the sides of the switch, up inside the housing, which is why he is springing the housing apart. he shows you how to repair a switch should you brake one getting it out, also I have a spare switch should you need one.
I'm replacing all the bonnet/boot gas struts later today. (once I get my ass out of bed, lol)
@@Paul1962 thank you so much! i am painting this week!
Ha ha! Gear knob came right off and my elbow hit the rear view mirror and broke the windshield. Hope the rest of this goes better ...