Це відео не доступне.
Перепрошуємо.
How to easy fix refrigerator french door hinge, flap not closing properly
Вставка
- Опубліковано 16 чер 2023
- There is a easy way to fix refrigerator french door hing, flap not closing properly which causes cold air to leak from inside.
Amazon deal: amzn.to/3RfjtOd
3 M double side tape: amzn.to/448IHRZ
Amazon daily deal: amzn.to/3pjLcC4
(paid link)
#refrigeratorrepair
#refrigerator
#refrigeratorservice
#refrigeratorrepairing
#fridge
#fridgerepair
#fridgerepairvideo
#fridgerepairing #kenmore
Thank God for fast forward. Thanks for the video
5:11-Remove the catch at the top front where vertical hinge is supposed to slide in
5:57-Put in some tape or something to add a little space so that the catch is effectively lower and can catch the vertical hinge better
8:46-Screw it back in place. Enjoy door that closes properly.
My fridge did not have anywhere to adjust door height. I checked the manual and under door hinge for adjustment screws but found nothing. This simple fix did the trick. Thanks for making the video.
Thank you! I am so glad you posted this!!! Works great 👍🏼
Thank you soooo much for these cheap and easy hacks! We appreciate YOU!
I had the same issue. The proper way to fix this is to adjust the door. The lower hinge has a nut. That nut will raise and lower the door. I dont believe its a defect, its just a step that sometimes needs to be done.
Thanks, not the solution I was expecting , but it worked!
This worked! I put in two round washers instead of the tape, but worked just as well
thank you..this helped solve my problem with my GE fridge
That fixed mine....thanks dude!!!!
We have a brand new Frigidaire French door refrigerator VERY similar to his. SAME PROBLEM! Hacks may work, HOWEVER he should look at his left door hinge base because our hinge base is NOT 90 degrees- as it SHOULD be. It was MANUFACTURED bent at MORE, like 100 degrees- which causes the LEFT door to sag beyond a “reasonable” adjustment attempt by using the supplied hex tool. On phone now with Frigidaire ( in the Philippines.) for a correctly made door base.
thank you. i now know where the spring goes. excellent!
The left door height is adjustable. There is a nut on the bottom where the door sits. You can just turn the nut to raise the door.
Thank you so much for mentioning this. It helped me solve my problem!
Where is the nut to raise the door. I have a Whirlpool with the same problem.
@@43stlrs On my LG, both door hinges have an adjustable nut on the bottom hinge which can be turned with a wrench to adjust door alignment.
It worked like a charm.
Thanks my wife will be happy now! ❤
Excellen.t. I'm going to fix my fridge today.
Frigidaire, I hope you are noticing this video….it has 14 THOUSAND views in only 6 months. You need to fix this defect in future devices and send repair parts to owners of defective products.
It works though I am not sure why this happened, could it be just wear and tare ?
Perfect!!! Ty so much.
Awesome ingenuity
I have this problem on a Frigidaire fridge that's only about 6 months old. I 'fixed' it using two 1/4 inch white nylon spacers and longer (1 1/2 inch) screws that lowered the bracket from the top of the inside of the fridge. I can add longer spacers if the problem gets worse, but I hope it doesn't.
amazing solve!!!!
Thank you for this. I thought I was going to have to buy a replacement part.
We put a broken pen cap into the little hole at the top of the mullion to give the mullion enough height to reach the hinge and close.
I have the same problem on my LG. I noticed the left door is hanging lower than the left. On further evaluation the bottom nut on the left has a different bushing than the right. Turns out the door height is adjustable
If you adjust the height of the left door, then it will be uneven with the right door
Thanks Sir. This video solved my problem.
please help to hit the like button. Thank you.
awesome
This is not the proper fix for this problem. The door hidges either need a shim or some have an adjustment screw.
No one cares about anything but how to fix the problem holy crap, whole video coulda been 2 minutes long
Jerk...
Dead assss
Painfully slow any slower we'd be in reverse
Calm down bud
😂😂😂😂 right
I need help the board of temrcher stop on C ~13 i dont know what to please help me
Didn't even fix it. Just Jerry rigged it
0:00 0:02 0:02 0:07 0:11 0:14