Це відео не доступне.
Перепрошуємо.
Ogg-It Bradley Smoker Bisquettes Press / Free Build Plans
Вставка
- Опубліковано 7 вер 2021
- With the price of Bradley Smoker Bisquettes tripling during COVID we were determined to build our own Bisquette Press. Several websites and videos provide a lot of information, instruction, and inspiration but after struggling to find any plans online, we thought we would share our own. This video follows the build process. Fun Father-Son project, we hope you enjoy!
Free Build Plans: a360.co/3hf1a9e
Parts Resources: (some links are affiliate)
IVY Classic 28038 2-3/8" Bi-Metal Variable Pitch Hole Saw: amzn.to/3DWuHOO
BOSCH HB212 2-1/8 In. Bi-Metal Hole Saw: amzn.to/3jWFeBq
Stainless Steel Disks (2-5/32'' Diameter): www.ebay.com/i...
3 Ton Vehicle Electric Scissor Car Lift: amzn.to/3zXuLLU
Potato Starch, 12 Ounce: amzn.to/3BTHn7j
Silicone Dehydrator Sheets: amzn.to/3tw7DBv
Butcher & Packer - Hardwood Sawdust: www.butcher-pa...
LEM Hardwood Sawdust: www.lemproduct...
---Music:Track: Drive -
Markvard [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Drive - Markvard | Fr...
Free Download / Stream: alplus.io/drive
Yoooo I was so thinking about this I had bought a bag of pellets from home Depot not realizing that my smoker that I got on a discount needs these Patty shape pellets for smoking thank you for making this video
Do we need this? Yes, big time, when some one raises a price by over 300% in one year, are you kidding me? " It's the cost of the ink"!!!!!!!!!!!!! I like my Bradley smoker and love the product it puts out. But my cost to smoke my pork butts went from $4.27 to $13.50 each smoke- that's about the cost of the meat!
Thank you- Thank you great information and very timely !!!!
Yeah the costs are brutal now. Its really a joke. I think its just because pellet smokers have flooded the market and no one uses these anymore. I still love it but its just so much money per smoke
great idea, thanks for sharing. I have made a few stainless rings and lay them on the shoot and fill with pellets, sure i only get 45 mins but i never leave mine unattended anyway. Im not sure where i could find the shavings like you showed. Also the A-Maze-N tube works amazing too.
Thank u very much I was sooooo surprised at the cost.
Just me, but seems grinding sawdust will eat up blender pretty quick. That will cost more than just buying biscuits. You could accomplish same thing by buying a bag of pellets and getting them wet. They turn into fine saw dust. Drying may take a little longer, but I have wet 20# bag right now that looks like his finished product after blender.
Good will $2 blender all day
#1 reason im considering ditching the Bradley is these are so expensive now and hardly any stores carry them. I love the flavor of the Bradley but its frustrating
Perfect👍
The thermostat control of my analog bradley burnt out and they do not sell replacement switch parts so it's basically useless now
There are ways to bypass the dial thermostat on You Tube. I upgraded to a 900w element (from the 500W) and added a digital thermostat.
Do we need this… no.
Actually after thinking more.. yes we absolutely need this
What was total cost per disc vs buying them?
I recall the math being ~4 cents per disc vs. 40 cents per disk when purchased.
@@ogg-it lots of time but who cares with savings like that I’ve always stuck to my Weber 22. And I got a pellet smoker..... I’d like to get a vertical smoker but man. Charcoal getting crazy in price as well
The final in an email chain of disappointment with Bradley
After applying a lubricant/rust dissolver to the screw I was unable to remove it. The screw slots gave out. Now the screw head must be ground off. At this point I do not have enough screws to fully reassemble the bisquette heater.
When I spoke to Olev and asked him what the dimensions were for those screws his answer was that he would have to research that for me, and he would let me know. I have not heard from him. The local big box and hardware stores carry nothing identical. The choices there are either slightly too large or too small, and in that small size only Imperial is available here. I think the dimensions must be Metric and I need those dimensions in order to purchase replacements online.
I am going to order stainless steel screws and replace all the rusted screws in the P10, which is almost all of them. Please, at least give me the correct screw dimensions.
In the picture below you can see that the bracket holding the heating wires is badly corroded. I understand you will not replace the entire heater assembly, but would you at least replace that part?
I am going to fully disassemble the bisquette heater, grind off all the rust, and repaint it with a heat tolerant rust resistant coating. I’m also going to examine the drip pan to try and understand how drippings got inside that heater in the first place since it is unreasonable to have to disassemble that part of the P10 to clean up what should not be there.
That concludes my request for help, and my information for you regarding repair of this unit.
MESSAGE FROM A VERY DISSAPOINTED CUSTOMER
I have used Bradley smokers for over 40 years. My first was an aluminum model that eventually had to be replaced. I’ve purchased several to give as gifts to others. I am as loyal and long term a customer as Bradley could hope to have.
The treatment I have received from support has been unpleasant. I’ve been accused of mistreating my P10 by support, then later had Olev confirm the screws were a bad choice that will be replaced. Now I’ve been accused of not properly caring for my P10 because I did not disassemble the heater to clean it. That procedure is not called for in your manual and should not be needed.
I will never again purchase a product from Bradley. Not because my P10 has problems, but because Bradley support tries to blame the product problems on me, and refuses to acknowledge and replace that which is faulty.
My entire interaction with Bradley has been fully documented in pictures and email. Take a moment to examine my UA-cam page and the videos I have there. They are detailed and have good reviews. I will be adding a detailed review of my experience with the P10, showing the rust throughout, the magnets sticking to what is claimed to be stainless steel, and the emails from support trying to blame me for those defects. Although my videos only get a up to 40,000 views, there is not much on UA-cam discussing the P10, so I expect my video will be easy to find if people research the P10 prior to purchase.
Because you are not going to correct the deficiencies in your product I am going to alert prospective customers to them. Most disturbing to me is that Bradley intends to keep shipping P10s with steel screws until November when the first run of P10s with stainless screws is expected. Are you planning to send everyone a set of new screws and tell them to replace them. Such would be a good policy for those of us who already have our P10s, but shipping out units with steel screws when you could easily procure and replace the screws in your inventory units is just unethical.
Like rust, the rot in a company comes from the top and works its way in. It saddens me that Wade Bradley has so little interest in his customers that he has chosen not to engage with me when I asked courteously that he do so. Leaders who shield themselves from disappointed customers, hide behind low tier technical support and refuse to acknowledge product deficiencies eventually pay the price. Word gets out, sales drop off and they no long have a company to lead. Good luck Wade, that is where you are taking Bradley.
Bendrix Bailey
Bendrix Bailey - UA-cam
My guiding service - lots of client contact
Northeast Woodlands Guiding
Great, give the amounts for everything but the wood. Seriously, does anyone proofread anymore!
@5:30 for those that can read
Can you email plans please ?
The link to the free build plans are in video description; however, I do not see an email associated to your profile.