How to remove GM 1999-2014 Heater hose inlet connector & replacement heater core Part # 15032062
Вставка
- Опубліковано 7 вер 2024
- I used part number 1503-2062 inlet connector
and outlet connector 730-5631 (napa) the napa part work for both sides but I ended up using the oem inlet (white) part.
a/c & fuel line hose tool: www.napaonline...
autozone disconnect tool: www.google.com...
There are two fitting types for the inlet on the 2005 Escalade. One if you have rear heat/AC and one if you don't. Mine has rear heat / AC and the NAPA fitting number is 790-4945. I had to soak the fitting in hot water and I used dielectric grease on the o-rings as it does not want to slide on easily when cold and dry.
Thanks to ZACPAC for NAPA info.
Good info I have not ran into a rear heat truck to know. Could you verify that part number? I could not pull it up. thanks
Comment.....the reason one is black and one is white is to show the inlet side and outlet side. The white side is the inlet and the black is outlet.
That makes since! Thanks for the feedback on the colors.
13:40
Are they the same size?
I see that the left is larger than the right
No they are not the same size. I had trouble finding the white (inlet) aftermarket part so I found an oem. If you try to use a dorman brand on inlet side make sure its smaller than the one on the left.
I did mine but used screw on clamps it still leaking 😞 should I use two clamps ?
Heater Hose To Heater Core Connector Part #: NOE 7305631 Line: NAPA Solutions cross reference Dorman 800-409 and Dorman makes a corrosion resistant stainless steel part number: 800-409HP
Verified✔️ could you be clear on if those can be installed on both the inlet and outlet ?
@@Zacpactv Yea exactly!! don't think it fits very good not worth risking (don't trust Dorman products)
Mine didn't have either connector!!!!!
Did it spill a bunch of coolant out?
My heater core was already unhooked and bypassed. from what i remember neither spilled a bunch out though. i started it with the hose unhooked on one end to help purge the air out so i didn’t get a bunch of air in the system.