You should have showed the whole firearm after it was done how does this hold up does it rub off easy does it come off when the gun gets hot or is it done just for a wall hanger
@@josephatnip2398 He probably didn't have the whole gun to show. Gold plating will wear through eventually, although how fast that happens depends upon how thick the plating actually is. Generally speaking, other than parts like the trigger, gold plating isn't something that you see on hard use firearms. It's more for commemorative items that aren't really going to be used much if at all.
The kit comes with a 250mL bottle of our 24K Brush Gold which contains 2.8g of fine-gold. Assuming this piece is 3 square inches of area, you would be able to plate around 400 pieces to a typical decorative thickness. An 250mL bottle will cover around 1,200 square inches of area to a typical decorative thickness.
It's definitely fun (and useful) to have the ability to gold plate things. Once you have everything you start to see items you never noticed before as possible candidates. Gold plating with ours kits is actually quite fun and in a way magical, people are always impressed when they see it happen in front of their eyes.
"White gold" is just a silver-colored alloy of gold with nickel, platinum, or another metal. What you see when you buy a "white gold" ring (such as a wedding ring) is actually Rhodium or Palladium plated. The white gold is what shows through once the plating wears off. Most people think what they're seeing is white gold but the white gold is the alloy underneath. We do offer Rhodium and Palladium plating solutions, which again, is what most people are referring to when they want a white gold.
I’m confused now. The website says Mild steel and carbon steel require a copper strike. Does the Nickel strike replace the copper strike? Sorry just received all my products and did not order a copper strike
2300 is the quote I got for my AK74 from a shop in Houston that has tons of gold plated 1911’s and AK47’s, they gold plate pretty much any firearm you want HTX custom grips
Great question! Aluminum is very difficult to plate. After being polished or cleaned the surface oxidizes within seconds of coming into contact with the air. We recommend sending the Alimunum to a professional to have Nickel Plated. The color and texture of the substrate will dictate the color and texture of the Gold. For a quote, visit our website www.goldplating.com/pages/quote-request
There is a few different reasons. The first one being the type of gold it is, if it is 14k, or 18k gold the color will be a lighter gold color. It could be because an item is freshly plated and it will change color a little bit as it sits overnight. Another reason could be because there is a lot of iron in the gold and it is depositing onto the surface of an item with the gold and it makes it appear darker. There is a lot of different reasons but these are the most common.
This kit is used by people right in their homes all over the world. It can be done with less equipment, however we do not recommend it as everything shown here is needed and tailored to people who do not know how to make their own setup.
There is a few metals that our soultions can not plate onto. There is a list of metals that we know we can plate onto that we have on our website if you are interested.
Bare aluminum cannot be plated onto with any of our kits. Our kits will plate onto most types of metal, however, trying to plate onto bare aluminum with our kits will not work. This is because aluminum requires a specialized under-plate process that is not suitable for consumer level plating operations. This process must be performed on an industrial level by trained professionals. We do not sell the process or provide support for plating onto unprepared aluminum surfaces. Any attempts to plate onto bare aluminum with our products will not work, please purchase with this in mind. If you have a project that requires plating onto aluminum, you may consider sending the parts to Gold Plating Services to be plated by our technicians. We can provide the required nickel under-plate for a nominal charge. We can then gold plate, or chrome plate your item or return it with the nickel under-plate. After the aluminum has the proper nickel plate it can then be plated with the metal you desire using our Universal or JewelMaster Series kits.
I have a Taurus pt1911 AR that I would like to get done just the slide and then all the accents parts the bottom frame I would like to be mirrored polished chrome would you be able to go plate the items I need and how much would you charge ?
+Howard Kurtus Thanks for the question. Yes, the same basic process would be followed. Steel is actually more difficult than copper. For plating onto copper the only difference would be using a "Bright Nickel" in the second beaker instead of "Woods Nickel Strike". Within seconds a fully opaque layer of gold is applied, and the longer you plate the thicker it gets - so no, the copper will not show through.
You can apply a Bright Nickel as the final step, in place of the gold (or before gold plating), however you still need to do the same prep steps - Electroclean, Strike, Plate.
The black on AK's (depending on the country of origin) is usually a paint which you can strip or sand off. Yugos and a few other countries use bluing. Then you just polish the steel. Any steel can be polished to a chrome finish, which is what you need to do prior to playing, assuming you want a high luster.
There are various methods and this is a highly discussed topic in gun communities such as forums. If you do a google search you can find lots of information on this subject.
Dear Jonathan We used to totally clean the heavy grease from our brand new galils, by tying the tip of the rifle with a string and immersin it several times in super hot soapy water for about a minute, then we rinsed the rifle in two separate containers...Immersion in soapy water, hot then another hot water all in separe containers. You may still need to do some detailed cleaning afterwards.
It will depend on how little waste you have and how thick you plate it, but most people can do it with about half a 8oz jar of our 24K Brush Gold. www.goldplating.com
You sure can! You can either buy them from our website or give us a call or e-mail and we will take your order. Our new website (note quite finished but store works great) is: gold-plating.com/collections/solutions GIve us a call if you have any questions or need any assistance at all.
We frequently ship to Vietnam. We have never had any issues sending our kits and solutions there. Give us a call or and e-mail and we will get you an order put together!
That's correct. Nail polish remover (acetone) works well for removing polishing compounds such as red rouge. Toulene works even better but is very similar to acetone. Thanks for the great input!
It purely depends on how thick you plate it and how it is taken care of. As you can see, it turns gold within seconds, but that is only an extremely thin layer that would wear off quickly. However, if you plate it for minutes it will get very thick and last a long time (years). If the item weren't handled at all it would last forever. If the item is handled daily and treated roughly it may only last a few years even with an average thickness plate. If you plate it thick it should last a really long time.
You would plate the gun in sections. As far as polymer: In order to electroplate something it must have a conductive surface (metal), so the polymer or plastic parts could not be plated unless they are made conductive with a conductive ink or lacquer. Coating plastics with conductive lacquer to electroplate can be quite difficult and have varied results.
Aluminum cannot effectively be brush plated. We do not sell the solutions or process for plating onto aluminum as it is extremely difficult and must be done properly by a professional or it does not turn out looking good.
There are many different ways to get there. In this situation, we simply buffed it on a buffing wheel with red rouge. It can also be chemically stripped. If you search the web there are many resources for how to remove bluing/black finishes.
No this particular set up will not plate onto aluminum. Plating aluminum requires a much more technically challenging process. We recommend sending aluminum items to a professional company like ours or similar to have them Nickel plated, and then you can gold plate them yourself with this kit.
I have questions 1. how much the price of the machine with coating material 2. Can the plastic coating 3. Does the machine can be charged for Saudi Arabia Thank
Answers: 1. This particular kit is $799 USD and includes everything you need to do gold plating as intended. Solutions, accessories, machine, etc. 2. Plastic items need to be prepared with a conductive lacquer or ink prior to electroplating. Electroplating requires a conductive (metal) surface. 3. Yes we can ship to Saudi Arabia. We've sold kits to nearly every country.
We are not sure what you mean by a "chrome gold look". If you mean a high polished gold finish, you would need to get the item to the desired luster prior to plating. The gold plating will mimic whatever surface you are plating it onto.
We would need to know what style it is (black or nickel, etc.) and the condition it is in. Typically we charge around $400-$500 for a pistol similar to this, however I would recommend e-mailing us with a picture and we can provide a firm quote. Another thing to note: the pistol MUST be fully disassembled, this service can be performed by a local Gunsmith for a small fee and this serves a double purpose - the pistol must be shipped to us and back to someone with a FFL (Federal Firearms License) which Gunsmiths have. E-mail us at the address in the video Description and we will be happy to assist you.
Great question. The gold does "seal" the steel off from exposure to air thus preventing rust and corrosion. However, it must be plated to about 1 micron to achieve this. An alternative option that many people choose is to apply a layer of Bright Nickel prior to gold plating, this produces a "diffusion barrier" that will keep the gun from corroding no matter how thick the gold is.
We are currently not offering plating on firearms due to a lack of an FFL. We can only do parts that do not require an FFL such as triggers, hammers, etc.
The Universal Plater Kit is $799.00, this includes the gold solution, Electroclean and Surface Activator. It also includes the other accessories as well as additional cotton sleeves and disposables. The only thing added to this kit is the "Woods Nickel Strike", which is $20 for an 8oz bottle. Woods Nickel Strike is required for plating onto steel items. So in total it would be $839.00 and would include enough gold to cover approximately 1,000 square inches to a typical decorative thickness.
I thought for mild steel, they told me I need a copper strike so I can plated in gold. This video they don't show no copper strike and the item is mild steel. 🤔 very strange and confusing.......
You can use the woods nickel strike, but we recommend the copper strike because you can visually see the item being activated and which makes plating easier.
Have you ever gold plated a prop gun 1911 i have a kimar 1911 im trying to have gold plated how much will you do it for you can check out a video of it on my UA-cam channel
Yes, however it must be done correctly. First, the gun needs to come fully disassembled. Also, it must be shipped to us and back to you through someone who has a FFL (Federal Firearms License). Typically local Gunsmith is someone who can do both of these things for you. As for pricing and how to proceed, it would be best if you sent us an e-mail with pictures and details and we can go from there.
How do you remove the original black finish on the part
Looks like ak-47 safety
+sasoproductions Turns out that is exactly what it is. Good eye!
You should have showed the whole firearm after it was done how does this hold up does it rub off easy does it come off when the gun gets hot or is it done just for a wall hanger
sasoproductions lol exactly what I was thinking! The movie lord of war came to mind
How much does it cost to gold plate the entire gun (AK) ?
@@josephatnip2398 He probably didn't have the whole gun to show. Gold plating will wear through eventually, although how fast that happens depends upon how thick the plating actually is. Generally speaking, other than parts like the trigger, gold plating isn't something that you see on hard use firearms. It's more for commemorative items that aren't really going to be used much if at all.
How did you made that safety turned into silver color when originally is black?
Sanding it down then using a lot of polish
Can I brush plate a stainless steel piece 3.5 feet x 3 inch x 3 inch? I am a novice at this but really interested to give it a try
hey dude I've been following you since day 1 you rock
Awesome! Thanks so much for your loyal following. We appreciate it!
So before coating should it be stripped of any other coating?
how many parts that same size could you plate with that same kit with no solution refills?
The kit comes with a 250mL bottle of our 24K Brush Gold which contains 2.8g of fine-gold. Assuming this piece is 3 square inches of area, you would be able to plate around 400 pieces to a typical decorative thickness. An 250mL bottle will cover around 1,200 square inches of area to a typical decorative thickness.
wow, im impressed. i bet all your silverware in your house is plated in gold. lol
It's definitely fun (and useful) to have the ability to gold plate things. Once you have everything you start to see items you never noticed before as possible candidates. Gold plating with ours kits is actually quite fun and in a way magical, people are always impressed when they see it happen in front of their eyes.
Also can you plate strait over nickle plating
What about white gold?
"White gold" is just a silver-colored alloy of gold with nickel, platinum, or another metal. What you see when you buy a "white gold" ring (such as a wedding ring) is actually Rhodium or Palladium plated. The white gold is what shows through once the plating wears off. Most people think what they're seeing is white gold but the white gold is the alloy underneath. We do offer Rhodium and Palladium plating solutions, which again, is what most people are referring to when they want a white gold.
Do you guys have a video explains proper voltage?
I’m confused now. The website says Mild steel and carbon steel require a copper strike. Does the Nickel strike replace the copper strike? Sorry just received all my products and did not order a copper strike
Sufferin' succotash! Shomebody made a gold AK!
How much it cost to do a full ak
2300 is the quote I got for my AK74 from a shop in Houston that has tons of gold plated 1911’s and AK47’s, they gold plate pretty much any firearm you want HTX custom grips
If I plate a matte aluminum piece with gold, will it get a polished shiny look?
Great question! Aluminum is very difficult to plate. After being polished or cleaned the surface oxidizes within seconds of coming into contact with the air. We recommend sending the Alimunum to a professional to have Nickel Plated. The color and texture of the substrate will dictate the color and texture of the Gold. For a quote, visit our website www.goldplating.com/pages/quote-request
This is awesome. May I ask how come some golds are more of a darker yellow/orangey and some are lighter and softer looking?
There is a few different reasons. The first one being the type of gold it is, if it is 14k, or 18k gold the color will be a lighter gold color. It could be because an item is freshly plated and it will change color a little bit as it sits overnight. Another reason could be because there is a lot of iron in the gold and it is depositing onto the surface of an item with the gold and it makes it appear darker. There is a lot of different reasons but these are the most common.
Can you polish this after ?
I have a new trigger that I need gold to match old. Is there a way to home do this without that awesome gear?
This kit is used by people right in their homes all over the world. It can be done with less equipment, however we do not recommend it as everything shown here is needed and tailored to people who do not know how to make their own setup.
Thank you!
Question: does this work on any metal ?
There is a few metals that our soultions can not plate onto. There is a list of metals that we know we can plate onto that we have on our website if you are interested.
Is stainless activator the same as nickle strike? I have and old kit. The bottle says stainless activator
Was looking at nickle plating a S&w 39, but a golden ak seems right as well.
What would some charge to gold plate items?
Depends on the item you want to gold plate. There are quote requests on our website so you can get an idea of how much we charge.
HELLO I WANT TO KNOW IF YOU MAKE SHIPMENT TO PERU , AS TIME ARRIVES IN WHICH WOULD BE THE COMPANY AND HOW MUCH PRESSUR
Yes, we have shipped to nearly every country in the world.
Gold Plating Services
pl provide me photo resistive ink for plating nikel and gold
Wow this video helped me a lot...
So glad to hear that! Thanks for the comment.
Does chrome stripping solution work the same as electro clean
Chrome Stripping Solution can be used in place of Electrocleaner, however Electrocleaner cannot be used to strip chrome.
If i buy the kit... Would you tell me the easiest way to get rid of the Black Nitride?
what do i do if oxidation does occur? help plz
Can you gold plate aluminum parts?
Bare aluminum cannot be plated onto with any of our kits. Our kits will plate onto most types of metal, however, trying to plate onto bare aluminum with our kits will not work. This is because aluminum requires a specialized under-plate process that is not suitable for consumer level plating operations. This process must be performed on an industrial level by trained professionals. We do not sell the process or provide support for plating onto unprepared aluminum surfaces. Any attempts to plate onto bare aluminum with our products will not work, please purchase with this in mind.
If you have a project that requires plating onto aluminum, you may consider sending the parts to Gold Plating Services to be plated by our technicians. We can provide the required nickel under-plate for a nominal charge. We can then gold plate, or chrome plate your item or return it with the nickel under-plate. After the aluminum has the proper nickel plate it can then be plated with the metal you desire using our Universal or JewelMaster Series kits.
Great work I need this service ASAP
What kit do i need to gold plate a stainless steel handgun ? And how many handgun you think i can make gold before running out of product?
TheCumdonners 2 1911’s with one kit may be possible
Is this just a basic steel or does this only work on stainless ??
Thank you
Would this work on denix replicas made of mostly zamak pot pelded steel with 5% zink
I have a Taurus pt1911 AR that I would like to get done just the slide and then all the accents parts the bottom frame I would like to be mirrored polished chrome would you be able to go plate the items I need and how much would you charge ?
would this work on copper as well? would the copper color show through?
+Howard Kurtus Thanks for the question. Yes, the same basic process would be followed. Steel is actually more difficult than copper. For plating onto copper the only difference would be using a "Bright Nickel" in the second beaker instead of "Woods Nickel Strike". Within seconds a fully opaque layer of gold is applied, and the longer you plate the thicker it gets - so no, the copper will not show through.
Gold Plating Services
Can you just use bright nickel onto steel then gold? Or what?
You can apply a Bright Nickel as the final step, in place of the gold (or before gold plating), however you still need to do the same prep steps - Electroclean, Strike, Plate.
How did you remove the coating to bring out the nickel like color of that cause they are usually black steel
The black on AK's (depending on the country of origin) is usually a paint which you can strip or sand off. Yugos and a few other countries use bluing. Then you just polish the steel. Any steel can be polished to a chrome finish, which is what you need to do prior to playing, assuming you want a high luster.
How could you remove the factory stain from an AR or AK .?
There are various methods and this is a highly discussed topic in gun communities such as forums. If you do a google search you can find lots of information on this subject.
Dear Jonathan
We used to totally clean the heavy grease from our brand new galils, by tying the tip of the rifle with a string and immersin it several times in super hot soapy water for about a minute, then we rinsed the rifle in two separate containers...Immersion in soapy water, hot then another hot water all in separe containers. You may still need to do some detailed cleaning afterwards.
Could you plate aluminum and zinc alloys with this kit?
Not aluminium or chrome
How much does that kit cost?
And could i send you my parts for gold plating?
Kit starts at $900 goes up to $1,250
That's an AK 47 safety lever
So where's the rest of this AK?
It's an AK variant safety selector.
How much will it take to plate 24” Rim
It will depend on how little waste you have and how thick you plate it, but most people can do it with about half a 8oz jar of our 24K Brush Gold. www.goldplating.com
I have a jewelry plating setup now. can I just buy the chemicals I dont have? And if so, where do I find them for purchase?
You sure can! You can either buy them from our website or give us a call or e-mail and we will take your order. Our new website (note quite finished but store works great) is: gold-plating.com/collections/solutions
GIve us a call if you have any questions or need any assistance at all.
can you gold plate on metal that has black nitrate on it?
The black nitrate would need to be removed down to the bare metal before plating.
Hello Do you ship to Vietnam ? we have a weird custome system so i'm not really sure about if they let the solution and machine enter in Vietnam.
We frequently ship to Vietnam. We have never had any issues sending our kits and solutions there. Give us a call or and e-mail and we will get you an order put together!
Can this be clear coated over without harm to the plating?
Yes, people often clearcoat items, espcially copper plated items as it corrodes quickly.
How many OZ of solution did you end up using?
What is this liquid you are using to coat ?
Liquid gold
Is this considered real gold ?
Hana Little yes it’s real gold dissolved in a liquid solution
hi how to do titanium gold for ak?
You can use nail polish remover to clean medal of polish material, oil, grease anything
That's correct. Nail polish remover (acetone) works well for removing polishing compounds such as red rouge. Toulene works even better but is very similar to acetone. Thanks for the great input!
Hello question for you. How durable is this finish?
Not very. A clear powder coat would be best.
how long will this coating last before it starts to fade ?
It purely depends on how thick you plate it and how it is taken care of. As you can see, it turns gold within seconds, but that is only an extremely thin layer that would wear off quickly. However, if you plate it for minutes it will get very thick and last a long time (years). If the item weren't handled at all it would last forever. If the item is handled daily and treated roughly it may only last a few years even with an average thickness plate. If you plate it thick it should last a really long time.
Where I should buy this universal plating
www.goldplating.com/products/universal
Email us at info@goldplating.com if you have any questions or need help placing your order.
Can this be done on Aluminum?
Chuck Best Not aluminium or chrome.
How or could you gold plate the whole gun even if the gun has polymer pieces
You would plate the gun in sections. As far as polymer: In order to electroplate something it must have a conductive surface (metal), so the polymer or plastic parts could not be plated unless they are made conductive with a conductive ink or lacquer. Coating plastics with conductive lacquer to electroplate can be quite difficult and have varied results.
can you plate aluminum?
Aluminum cannot effectively be brush plated. We do not sell the solutions or process for plating onto aluminum as it is extremely difficult and must be done properly by a professional or it does not turn out looking good.
is this coating real gold or is it a chemical reaction that makes it look gold?
This coating is real gold. This particular solution deposits a 24K, 99.97%+ purity, hardened gold plate.
how do i get it to this point from the black finish of the AK? sandpaper or buff?
There are many different ways to get there. In this situation, we simply buffed it on a buffing wheel with red rouge. It can also be chemically stripped. If you search the web there are many resources for how to remove bluing/black finishes.
Gold Plating Services how can i chemically strip the black finish on the gun?
hi can this kit gold plate aluminum?
No this particular set up will not plate onto aluminum. Plating aluminum requires a much more technically challenging process. We recommend sending aluminum items to a professional company like ours or similar to have them Nickel plated, and then you can gold plate them yourself with this kit.
Gold Plating Services
where is you office
I have questions
1. how much the price of the machine with coating material
2. Can the plastic coating
3. Does the machine can be charged for Saudi Arabia
Thank
Answers:
1. This particular kit is $799 USD and includes everything you need to do gold plating as intended. Solutions, accessories, machine, etc.
2. Plastic items need to be prepared with a conductive lacquer or ink prior to electroplating. Electroplating requires a conductive (metal) surface.
3. Yes we can ship to Saudi Arabia. We've sold kits to nearly every country.
how do you get a chrome gold look on a gun part like this one?
We are not sure what you mean by a "chrome gold look". If you mean a high polished gold finish, you would need to get the item to the desired luster prior to plating. The gold plating will mimic whatever surface you are plating it onto.
Around how much for playing a whole 1911 38 super??
We would need to know what style it is (black or nickel, etc.) and the condition it is in. Typically we charge around $400-$500 for a pistol similar to this, however I would recommend e-mailing us with a picture and we can provide a firm quote. Another thing to note: the pistol MUST be fully disassembled, this service can be performed by a local Gunsmith for a small fee and this serves a double purpose - the pistol must be shipped to us and back to someone with a FFL (Federal Firearms License) which Gunsmiths have. E-mail us at the address in the video Description and we will be happy to assist you.
Where to order this device?
This kit can be found here: www.goldplating.com/collections/plating-kits/products/universal?variant=18457713999934
This is really cool nice
Nice I need to get my gun parts done
After gold plating bare metal would I need to seal it or does the plating protect the metal?
Great question. The gold does "seal" the steel off from exposure to air thus preventing rust and corrosion. However, it must be plated to about 1 micron to achieve this. An alternative option that many people choose is to apply a layer of Bright Nickel prior to gold plating, this produces a "diffusion barrier" that will keep the gun from corroding no matter how thick the gold is.
How much to gold plate a 1911 hand gun
It depends on the type but typically its about $400-$600 depending on what needs to be done to it.
How much to do a PAP m92?
We are currently not offering plating on firearms due to a lack of an FFL. We can only do parts that do not require an FFL such as triggers, hammers, etc.
What is the price of this manchine
The Universal Plater Kit is $799.00, this includes the gold solution, Electroclean and Surface Activator. It also includes the other accessories as well as additional cotton sleeves and disposables. The only thing added to this kit is the "Woods Nickel Strike", which is $20 for an 8oz bottle. Woods Nickel Strike is required for plating onto steel items. So in total it would be $839.00 and would include enough gold to cover approximately 1,000 square inches to a typical decorative thickness.
Is that stainless steel??
This is so cool
That is so cool keep it up
I thought for mild steel, they told me I need a copper strike so I can plated in gold. This video they don't show no copper strike and the item is mild steel. 🤔 very strange and confusing.......
You can use the woods nickel strike, but we recommend the copper strike because you can visually see the item being activated and which makes plating easier.
6:05.. its a safety selector for a ak rifle.
Very good, thanks for the info!
Looks neat
Where do you buy that Universal Plater,,,,,,,,,,,,,,,,,,,,,
The product page for the Universal Plater Kit is in the description of the video. It can be bought from us on our website.
Very nice
could people send you items to gold plate for them
Yes, we are "Gold Plating Services" afterall! :) Give us a call or e-mail, the info is in the video description.
Gold Plating Services what about rims???
Could I send my AK 47 trigger in to have it gold plated?
Absolutely. We do have a minimum plating charge of $150.00 which this would fall into.
You can buy a plating kit for less than that.
Can u guys show us how to do just a nickel plate ?
Have you ever gold plated a prop gun 1911 i have a kimar 1911 im trying to have gold plated how much will you do it for you can check out a video of it on my UA-cam channel
U couldn't find a more suitable rifle to gold plate sir.
Does it. Scratch off
Yes. All metal can be scratched with the right abrasion. However, under normal use and with a thick plate, it holds up well.
How can i chemically strip a gun?
Hi was your number I need a part down
Appreciate,
can you make a video of gold plating a beretta 9mm
ak selector
nobodys gonna say it, huh?
farid shaikh
ak47 selector, safety, semi, full auto
Can I send my whole ak-47?
Yes, however it must be done correctly. First, the gun needs to come fully disassembled. Also, it must be shipped to us and back to you through someone who has a FFL (Federal Firearms License). Typically local Gunsmith is someone who can do both of these things for you. As for pricing and how to proceed, it would be best if you sent us an e-mail with pictures and details and we can go from there.
كرطي
Who seen the ak part and clicked 🙏