This is the style of tow truck that many people have been suggesting for use here in the Philippines, to speed up the process of towing. Actually the MMDA have a couple like that, but they're typically for rescue only. The ones used for illegal parking are either flat beds, with a winch and hook. Or the lifter which involves chaining a bar under the vehicle and then manually lifting it with hoist.
I just love the autumn afternoons the way the sun hits everything as long as I am not facing the sun when driving because it usually blinds the hell out of me.
@nomercyinc6783 you really have very little experience in driving observation. Many people cannot back up a vehicle with no trailer. Get xsome experience, then share your opinion.
Casey I agree with Ben you make towing a vehicle look really easy with the Sneaker truck. I will give you credit backing those vehicles in beside the garage in that tight spot definitely took skill for sure
At 22:10 Those Erickson self-winding straps work every bit as nice as they appear to. All my old tailed 1" straps are in a bucket someplace (I think), replaced with Ericksons. Get a dozen and you won't regret it.
Seriously awesome backup driving skills Casey! there's a spot here in Portland I backed a box truck into a 90 degree sharp angle with cars parked on either side way back when I ran deliveries around town I still remember when I drive near there.
Backing a traler, either you were born with the skill or Not. I started moving boat trailers around a yard with a lawn tractor at about 8 or 10. Good skill to have
Once again great job Casey keep the wonderful videos coming they make my day I can have a really bad day and watching your videos just takes all that away thank you
My buddy pulled in to unload the trailer and Motor Home after a trip. The Trailer had to be backed around the building after unloading. Since I had the two-door Explorer, I volunteered to maneuver the trailer around back. Short wheelbases are helpful.
steel cable is fine in a hawse on a trailer- loading trailers hardly needs much off axis line - doesn't really even need a fairlead (a steel hawse would be "more compatible" - if the aly gets worn away.)
Curious, couldn't you have sucked the underreach in to shorten up the overall length and gotten in there a little easier or did you need it out that far to clear for turning when you were putting the car behind the shop? Shame that "donor" car is rusty underneath but I bet someone would save it. Great job helping out a friend
So Ben im always looking for new projects when you are looking to lighten those to do projects. Or if you are looking for a running driving convertible 65 gto we have one ready to go.
The best shenanigans are when your too dumb to realise it shouldn’t work so you make it work. Great seeing the sneaker in action again. Great reflexes from Ben
Hey Ben, sometimes you just want to play a round in the snow. :D Super backing, bit I DID ask why you turned them around when you did it. I just assumed that he wanted them backed in. Doesn't matter, you're the man front, back, or sideways, Casey will get the job done. :D God Bless.
I found link under my tee products that looked similar to the mighty products you showed in video. Is this the only link available that matches your current in hand deviceyou showcased in video?
What year is that truck if it's for sale if it's A 2003 truck the person that had one with the same body style might be interested in it then possibly. That's only if it's for sale though. I see it's missing the left side rear driver side taillight lens on it to.
Or….. since not everyone has a tractor supply nearby, they can just use my affiliate link down below to get the straps and support my channel at the same time!
I extend it all the way out when hooking and unhooking the vehicle to keep as low of a clearance angle as possible under the vehicle. When towing its retracted as close as possible to my truck
Casey, does your wife let you go out and play like this with out a fuss? She's a GREAT wife I'm sure. Goid content keep it up. V8 your done!!! Sleeper truck sounds good---nice rumble
Just two guys with projects helping another guy with projects needing moved to his house! That's what friends do!
MAD driving skills!👍😎 Backing those cars beside the garage!!!That took expertise and finesse, I don’t care if it was more than one try!👍😎🏆
"Do you sell straps off your truck"....sounds like you friend has one of those trucks with the words "past this step its consensual" written on it 🤣🤣🤣
His truck has that sticker on the step 😂
@@CaseyLaDelle 🤣🤣🤣
This is the style of tow truck that many people have been suggesting for use here in the Philippines, to speed up the process of towing.
Actually the MMDA have a couple like that, but they're typically for rescue only.
The ones used for illegal parking are either flat beds, with a winch and hook. Or the lifter which involves chaining a bar under the vehicle and then manually lifting it with hoist.
Casey, you are amazing! Love those moves. Love your channel. Keep 'em comin'.
That Was Good Backing up Between the shed & Tree good job ❤❤❤❤❤❤❤❤❤❤
Awesome truck driver backing skills!
Another moving story from Casey and his mates. Fun to see the styling points that made it to Australia from the US. A
I just love the autumn afternoons the way the sun hits everything as long as I am not facing the sun when driving because it usually blinds the hell out of me.
Good job backing up no matter how many tries it took. it was a very difficult job. Well done!
@nomercyinc6783 you really have very little experience in driving observation. Many people cannot back up a vehicle with no trailer. Get xsome experience, then share your opinion.
Always good to see the boys out playin together.
Casey I agree with Ben you make towing a vehicle look really easy with the Sneaker truck.
I will give you credit backing those vehicles in beside the garage in that tight spot definitely took skill for sure
At 22:10 Those Erickson self-winding straps work every bit as nice as they appear to. All my old tailed 1" straps are in a bucket someplace (I think), replaced with Ericksons. Get a dozen and you won't regret it.
Insane amount of skill in this video
I’m sorry but I didn’t see it. To me it looked as if it’s his first time using a sneaker. At least he strapped the car down and used tow lights.
That was some great backing Casey!! Fun to watch you three.
I would totally take that trans am. That's my dream car. In love.
I ordered a couple of those mighty ratchet straps Casey, thks for the tip.
sure wish we were neighbors....it would be nice to have folks who help each others. i buy tow gear from mytee products. they are only an hour from me.
Glad to see I'm not the only car horder! Mine are all 4x4s except one 84, 300Z
Seriously awesome backup driving skills Casey! there's a spot here in Portland I backed a box truck into a 90 degree sharp angle with cars parked on either side way back when I ran deliveries around town I still remember when I drive near there.
Projects are always cool. Especially when you have new tools!
You are never too close until you hit it.
Also... A miss is as good as a mile! (meaning not a hit in either case!)
You guys are a lot of fun when you get together.
Casey, you gotta fix that tailgate so Ben and Grumpy stop picking on you. LOL
Backing a traler, either you were born with the skill or Not.
I started moving boat trailers around a yard with a lawn tractor at about 8 or 10. Good skill to have
Once again great job Casey keep the wonderful videos coming they make my day I can have a really bad day and watching your videos just takes all that away thank you
a bit like the simpsons
I had to chuckle about all that "backing" being "straight forward"!!! 😂😆😂!
Sorta reminds me of my neighborhood in La Pine. Nothing like a little lunch in Sunriver
That's a pleasant surprise, a later than normal Casey video. Thank you 😊
And today's driving award goes to . . .
It was hard to see the tire guides from an old car wash through the camera lens! LOL
As always another job well done. Nice to see the Dodge again. Also Ben has some nice reflexes, nice stomp!
Loved the video and it was fun to watch! The amount of skill it takes to do all that is absurd!
My buddy pulled in to unload the trailer and Motor Home after a trip. The Trailer had to be backed around the building after unloading. Since I had the two-door Explorer, I volunteered to maneuver the trailer around back. Short wheelbases are helpful.
Great job. What kind of winch mount do you have on the front of the sneaker truck
Westin
Thanks for the video, always enjoy watching!
Better get finished with them before that tree gets any bigger!😂
Your truck has a nice deep rumble too it sounds amazing Another job well done
Not a bad day.. Moving vehicles around for a friend. That was a tight backing job to the side of the garage!! 😬
That was some fine work, Casey.
Great video again. Thanks for sharing your adventures
Thanks for the tip about mighty products
Wow. Enjoyed the heck out of this. Peace Out.
steel cable is fine in a hawse on a trailer- loading trailers hardly needs much off axis line - doesn't really even need a fairlead (a steel hawse would be "more compatible" - if the aly gets worn away.)
That was some impressive reversing. 👍🏻
Love watching you all! Hilarious self-deprecating bunch 🤣🤣
What kind of front winch mount is that you’re using on the dodge truck? Please
Westin
It's like the Fabled Elephant graveyard, except you've found the Four Wheeled equivalent, where Old Cars go to rest out of the sight of men.
that was fun to watch. Maybe one day I could be so good at reversing a trailer. lol
Cool thanks 👍
Great video, you got a great group of friends
Nice job backing in
Great start to my day
Thank you
That’s a nice parts car.
Love those a-body ponchos
I was thinking that it’s way nicer than my starting point project.
man, im jealous of those lemans's. Used to have a 70 and a 72 back in the day. I'd love to get a nice one-they're really getting tough to find
Curious, couldn't you have sucked the underreach in to shorten up the overall length and gotten in there a little easier or did you need it out that far to clear for turning when you were putting the car behind the shop? Shame that "donor" car is rusty underneath but I bet someone would save it. Great job helping out a friend
The farther out the under reach the better you can control the vehicle you’re towing in tight areas
That black Ram truck sure does sound good.
How cool ya got a convoy, breaker 19, hammer down, good buddy.
Good driving
So how many tow trucks do you own? Keep us posted....enjoy your projects!!
Three
I need a rust free back hatch & front passenger fender for my dark red 2012 Ford Escape if you run across any. Lol. Great video as always.
That firebird formula is a ton of work.
Probably worth about 2000.
That trans am is my dream car. Not the color, but badass
I need another piece of property like that guy has to hide some of my projects from my wife. Lol
Another great video Casey. As im from the UK can I ask what make and model the cars are that you guys moved as they look great. Thanks
I love your Ram so much, looks so cool man
So Ben im always looking for new projects when you are looking to lighten those to do projects. Or if you are looking for a running driving convertible 65 gto we have one ready to go.
When your sneaker truck is running forward, your reverse lights are on
They are on a delay to keep the camera on and visible so that I can see to fold up the lift while driving forward
I was gonna say sounds like a GM issue. Since the 80s I've seen a great many of them driving down the road with backup lights on.
That's good idea , very professional.
Those rocks are banded obsidian, likely from Glass Buttes.
Casey, that isn't just a pallet of rocks, it a pallet of excellent lithic material (all obsidian)! Is your buddy Ryan also a flintknapper?
I've done exact thing watching passenger mirror and forgot about my mirror🤣
Good Friends help Friends 👍
Ben needs a wheel lift 🤔🤔 lol ! Another great video 👍👍
The best shenanigans are when your too dumb to realise it shouldn’t work so you make it work. Great seeing the sneaker in action again. Great reflexes from Ben
Hey Ben, sometimes you just want to play a round in the snow. :D Super backing, bit I DID ask why you turned them around when you did it. I just assumed that he wanted them backed in. Doesn't matter, you're the man front, back, or sideways, Casey will get the job done. :D God Bless.
Like a glove, good job Casey..yipyip..
For whatever reason, I think this guy could use a custom under reach/wheel lift on his tractor's 3 point hitch
Casey Where did you find that backpull hitch
I just googled it
@@CaseyLaDelle unfortunately I have but all I can find is regular hitches
@@lonewolf0985 no idea 🤷🏻♂️
Great job.. Thanks for the video
My buddy once had a 78 formula.. big 400 c.i engine.. I miss that car lol
I found link under my tee products that looked similar to the mighty products you showed in video. Is this the only link available that matches your current in hand deviceyou showcased in video?
That " tractor " is so cute....
Awesome video you guys make me laugh but you accomplished a lot
What year is that truck if it's for sale if it's A 2003 truck the person that had one with the same body style might be interested in it then possibly. That's only if it's for sale though. I see it's missing the left side rear driver side taillight lens on it to.
Are those Toyo AT3s on the sneaker truck?
Yep
I only did 1 repo years ago and I was scared spitless. That sneaker truck would have helped immensely.
Walk tough and carry a [dolly] bar. Worked for me in the day.
@@JustCameronAndHisJeep please could you explain what is a “doll bar”? Thank you😊
@@yvonnem5819 a typo... Dolly bar. In my case a 5 ft long steel bar to assist with leveraging the dolly wheels up.
Fitting that truck down that path with out backing a vehicle in tow would be tough.
I’d wish I had the trans am. But I have a 97 Thunderbird as a project.
Man you made that look easy...
Actually with the winche and wheel lift your truck is probably longer than a long bed
I think I heard several guys in the rust belt cry when you said it was a parts car.
What kind of power pack does the black dodge run guys ?
Banks
Those ratchet straps are available at tractor supply in 6 ft and 10 ft.
Or….. since not everyone has a tractor supply nearby, they can just use my affiliate link down below to get the straps and support my channel at the same time!
Why do you extend your sneaker all the way out? To each their own I guess.
I extend it all the way out when hooking and unhooking the vehicle to keep as low of a clearance angle as possible under the vehicle. When towing its retracted as close as possible to my truck
Is that silver dodge ram 4x4 truck for sale by chance Casey I know someone who might want to buy it off of your buddy out there in Utah possibly.
Great job with that wheel lift & exsperience that looked easy . Backing up that good .
Been a 1 truck job with the nrc
Casey, does your wife let you go out and play like this with out a fuss?
She's a GREAT wife I'm sure. Goid content keep it up. V8 your done!!! Sleeper truck sounds good---nice rumble
Casey What Banks equpment do you have on that Cummins?
Your buddy with the beard reminds me of The Big Lebowski's friend, the Vietnam guy.
I wonder how those project cars are coming along. 😉
"LIKE" button torqued to manufacturer's recommended specification. "CLICK"
Dedicated golfer when you have to plow the golf course.