How to Replace Wheel Bearing 2007-2013 Mitsubishi Outlander
Вставка
- Опубліковано 17 жов 2022
- Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ia/1AAXX00057
This video shows you how to install a wheel bearing on your 2007-2013 Mitsubishi Outlander. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2007 Mitsubishi Outlander
2008 Mitsubishi Outlander
2009 Mitsubishi Outlander
2010 Mitsubishi Outlander
2011 Mitsubishi Outlander
2012 Mitsubishi Outlander
2013 Mitsubishi Outlander
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaWy/1AXAA00013
• Pry Bar 1aau.to/oF5/1AXAA00020
• 17mm Wrench 1aau.to/oIv/1AXAA00010
• 19mm Wrench 1aau.to/oIv/1AXAA00010
• 10mm Socket 1aau.to/oaFY/1AXAA00017
• 14mm Socket 1aau.to/oaVn/1AXAA00015
• 17mm Socket 1aau.to/oaVn/1AXAA00015
• 19mm Socket 1aau.to/oXf/1AXAA00043
• 32mm Socket 1aau.to/obC/1AAST00003
• Bearing Puller
• Dead Blow Hammer 1aau.to/oI4/1AXAA00091
• Press
• Trim Tool Set 1aau.to/oQY/1AXXX00006
• Channel-Lock Pliers 1aau.to/ohN/1AXAA00139
• Needle nose pliers 1aau.to/own/1AXAA00051
• Needle nose pliers 1aau.to/own/1AXAA00052
• 1/2 Inch Breaker Bar 1aau.to/ooT/1AXAA00078
• Ratchet 1aau.to/oa9U/1AXAA00016
• Torque Wrench 1aau.to/oaf7/1AXAA00044
• Drill
• Brake Grease
• Brake Parts Cleaner
• Bungee Cord
• Copper Anti-Seize
• Cotter Pin
• Gloves 1aau.to/osF/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/onG/1AXAA00343
• Floor Jack 1aau.to/oMy/1AXAA00068
• Hammer 1aau.to/oI4/1AXAA00091
• Pick 1aau.to/oBi/1AXAA00037
• Punch
• Sledge Hammer 1aau.to/oI4/1AXAA00091
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
Finally Found the video I needed with all the specific details and positions to place parts back together , THANKS !
Very good video but you broke the speed sensor and forgot to show us how to get it out after you broke it an you also forgot to show us how to get the the race piece off the Hub so I don't know if you can edit this video and if you have video of you doing those two things that be a great help to a lot of people again it was a really good video
Wow I got charged for 3hrs 45mins to have both front wheel bearing done at Automotive spare parts in Macksville NSW. I thought I was being ripped off and after watching your video I definitely was robbed.
Excelent video, very well explained. I hope you could do one of the clutch remplacement.
Thank you for this video. I’m really appreciate.
New to your channel. Nice job. Awesome videos! 👍
I enjoyed this video. Thank you for showing the details.
That said, some thoughts:
Anti-seize’s liquid phase is petroleum based. You probably don’t want to have overspray onto the CV boot (rubber).
Similarly, probably don’t want to use anti-seize in the caliper guide pins either. Use silicone grease instead.
What special tool is that you’re using to hold steering knuckle to press out the bearing?
perfect video. Great detail and explanation.
+Trevor Thanks for watching our video! 1aau.to/m/Shop-TRQ
Does does this model 's AWD version have a bearing or a hub assembly for REAR...Instead of hub can we replace only the bearing
What's the torque spec for 09 Lancer rear hub bearing assy the 4 bolts? Nice video, everything I see is front videos tho.
Good job...
I will try it, but does not have special tools 😉
Nice video, however when loosening the two sided bolts don’t use the impact on the bolt. Used it on the opposite side
What is the labor charge to put in the bearing into the knuckle?
23:56 I think you mean to torque the 10mm wheel sensor bolt to 76 in. lb. and not ft. lb. Great video.
Can you tell me the thread pitch for the bolts that go to the caliper bracket
must be a Harborfreight tools lover like me xD
Brand is that puller that you use? I can’t find it anywhere
As a fellow shop owner, I also purchase my tools from Harbor Freight. So I must ask, as I see you're using ICON, whom is very proud of their products based on the price they're sold for, do you find it worthwhile to use the ICON over Pittsburg?
awesome rust dust
HF tools!!
A few more cheap tools from harbor freight could have made this alot easier saving time and money.
The rubber on the balljoint is broken.
Gave me number of hub bearing chariot
"Snap ring is in" other half isn't even set inside the groove.
Dam 76 foot pounds fir a speed sensor lol that’s a little to much lol
One very important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?