Chinese Quad 110 cc wiring Nightmare

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 84

  • @Stacyjtyler
    @Stacyjtyler 6 років тому +2

    sounds like the Bendix gear on your starter is not engaging. Pull the starter and there is a little gear on the end. Lube the gear on the end and apply voltage while its not actually installed into the atv.
    observe the gear on the end of the starter when you apply voltage and the gear should shoot out. Right now it doesn't sound like the gear is actually shooting out.

  • @Bronze_T_Garage
    @Bronze_T_Garage 9 років тому +1

    dude I got one totally like electronically screwed up, I have been trying to figure out how to wire it to even get the started to turn over... nothing.

  • @th31s
    @th31s 9 років тому +3

    i know you sold the quad but just that you know the starter dissent engage which means that the motor does't spin and spark plug don't sparks

  • @joeymicklewright542
    @joeymicklewright542 5 років тому

    What make and moddle is this please exact sa.e as minr but i need parts for it

  • @tinybrute1262
    @tinybrute1262 8 років тому +1

    The thing in the back is a fall off switch you will get no spark if it's unplugged

    • @Iseekoutthetrails
      @Iseekoutthetrails  8 років тому

      cool I did not know that, but I sold this quad but thanks for the info.

    • @JathTech
      @JathTech 6 років тому

      The switch is normally closed, so just removing it works the same as having the cap on.

  • @chivosadventures8171
    @chivosadventures8171 10 років тому

    cool video were you ever able to get that thing running? where did you get it? it sounds like the starter isn't engaging.. does it have good compression?

    • @Iseekoutthetrails
      @Iseekoutthetrails  10 років тому

      I traded my old camera for it, and no I never got it running, after researching how much everything i need to get it running would cost me, almost $300 bucks I decided to just scrap this project and i am going to sell it for parts at my next yard sale i have.

  • @D4RK1GHT98
    @D4RK1GHT98 9 років тому

    Can I have the key ANd ignition??? you said you don't need it

  • @OscarLopez-rd8co
    @OscarLopez-rd8co 3 роки тому

    it could be a video of where the gas hoses and the exhaust hose go please

  • @Givemeafinname
    @Givemeafinname 9 років тому +3

    I'm in the same boat, this will be my second Chinese quad that I messed with wires..
    It takes a while but China riders is a forum that has wiring diagrams and other tips that can sort out mysteries..
    Google China riders..

    • @Iseekoutthetrails
      @Iseekoutthetrails  9 років тому

      +Givemeafinname I sold it.

    • @Givemeafinname
      @Givemeafinname 9 років тому +4

      Well at least the info I put up can direct other viewers to that forum..
      I guess I was too late..

    • @Iseekoutthetrails
      @Iseekoutthetrails  9 років тому

      Givemeafinname
      yea but thanks anyways

    • @user-fc8xr2dh3y
      @user-fc8xr2dh3y 6 років тому

      There is a youtue channel that will help greatly with any wiring issues, look up Harvey Spooner he'll guide you in the right direction.

    • @ravagingpanda067
      @ravagingpanda067 4 роки тому

      Givemeafinname your comment was not in vain, thank you for the great resource

  • @JamesSmith-lb7no
    @JamesSmith-lb7no 9 років тому

    Help I get it turn over by not spark also I have the anti thief disconnert

    • @Iseekoutthetrails
      @Iseekoutthetrails  9 років тому

      +James Smith sorry could not figure mine out so i sold it, not a electrician.

  • @OGs_Nightmare
    @OGs_Nightmare 9 років тому

    if the safety switch in the back that wasn't connected you get a no start issue the stater produces spark and charges battery

    • @Iseekoutthetrails
      @Iseekoutthetrails  9 років тому

      +brandon winning thanks for the info, but I sold it.

  • @litabatross7638
    @litabatross7638 2 роки тому

    That fussy need or I won’t get no spark I have a few of those quads and 10 volt fuse. It blows with a open curcit or a short. Just put a fuse in

  • @janiecethompson8388
    @janiecethompson8388 6 років тому +1

    I'll make a video on Chinese 110cc wiring harness.. an post it on here so most of u can see

  • @dominikdelaurier454
    @dominikdelaurier454 5 років тому +3

    The chain isn’t hooked up to the gear of starter and fly wheel

  • @321BOYZFL
    @321BOYZFL 9 років тому

    how do I bypass the key switch

  • @dorianjames9798
    @dorianjames9798 9 років тому +1

    Be careful with coils and cdi's from eBay! Had a few not work that were new.

  • @joshcouch5106
    @joshcouch5106 9 років тому +1

    new harnesses are only 60$ on amazon

  • @outoutland3768
    @outoutland3768 9 років тому +1

    deconected the system alarm. it work, trust me. same problem i have with my 110cc atv...

  • @tiporari
    @tiporari 9 років тому

    Starter is not engaging the engine. Many of the Chinese quads have chain driven starters. No engine rotation means no spark, bad wiring or not.
    The box with heat sink is your voltage regulator. Wires from stator run to it, and 12vdc comes out. The other box is your CDI box for ignition. Pickup coils next to stator tell it when to spark, set advance etc. The plastic alarm box is junk, throw it away.
    You can rewire these, but it helps to have a schematic for the regulator and CDI unless you cut apart the original harness and reverse engineer it.
    The engines are actually really good Honda clones. Overall if you aren't a mechanic and don't like to tinker you should stay away from these as they require some expertise to repair.

    • @Iseekoutthetrails
      @Iseekoutthetrails  9 років тому

      tiporari sold it

    • @tiporari
      @tiporari 9 років тому

      1down4up Ahh, well at least you tried and learned in the process. :) Most people give up too easily, which is fine with me; just means more projects out there to tinker with. Have fun!

    • @Iseekoutthetrails
      @Iseekoutthetrails  9 років тому

      tiporari yea it was a learning process.

  • @kakarot1192
    @kakarot1192 8 років тому

    Are you retired?

  • @justinroderick7110
    @justinroderick7110 8 років тому

    check your coil and your cdi box and make shore all wires and everything is hooked up right and make shore the spark plug is fireing blue and not orange

  • @dorianjames9798
    @dorianjames9798 9 років тому +1

    All you need is four wires to make it run, and scrap the rest

    • @Iseekoutthetrails
      @Iseekoutthetrails  9 років тому

      sold the quad, thanks for watching.

    • @ahmadmohammad4325
      @ahmadmohammad4325 7 років тому

      dorian james i have the same problem message me and help me if you can

  • @traci123171
    @traci123171 3 роки тому

    I've had the same problems. 100%

  • @traci123171
    @traci123171 3 роки тому

    Lmao. We must have bought a bike from the same person. Mine is all fucked up

  • @litabatross7638
    @litabatross7638 2 роки тому

    Main fuse is brown

  • @darylconstantine8369
    @darylconstantine8369 8 років тому +2

    there is problem with your starter clutch..you need to replace a new starter clutch

  • @thruitallauto2538
    @thruitallauto2538 6 років тому

    Just fixed mine

  • @fullgas7133
    @fullgas7133 10 років тому

    freewheel is bad. A cover on the left.

  • @OGs_Nightmare
    @OGs_Nightmare 9 років тому

    the zonco is a cdi box it triggers spark

  • @janiecethompson8388
    @janiecethompson8388 6 років тому +1

    Very simple to fix.

  • @will2ams1
    @will2ams1 8 років тому

    is not going to start if you don't have gas in it either

  • @fijibluefg2321
    @fijibluefg2321 7 років тому

    I have the same atv

  • @jagz7132
    @jagz7132 8 років тому

    NIGHTMARE NOT NITEMARE

  • @scrappydog132
    @scrappydog132 10 років тому

    Nightmare*

  • @knallerttuning-dk9666
    @knallerttuning-dk9666 8 років тому

    Starter kæden er faldet af