Thanks! We're getting a new shop soon so I can get my hands on some newer stuff to test and tear down like the GE WD Combo w/ heat pump. Also got a GE SmartHQ to test on it too!
I used one of your old videos to get a dryer going , an old Frigidaire. As soon as you used the phrase "a criminal amount of lint" I hit subscribe... my wife is a nonbeliever of the correlation between a dryer working and a clean dryer
Yes!!! 1000%!!! And what’s worse is trying to get the technicians to fix it! The warranty company is awful! The whole reason to buy the warranty was so I didn’t have to fix it myself!!! I will never buy another one and I will never own another Maytag!!!
I have this washer …bought new in February. Tore up on July 4th…took 55 days to fix. Tore up again and now Maytag says gotta go to “product review board” to find a resolution. The repairman said they would replace it. Company is absolute joke.
Purchased this washer/dryer less than 6 months ago.. washer would not leave sensing mode, error said clothes detected during afresh cleaning cycle. And washer screen stuck on clean washer reminder.. unplugged, turned on off turned to different cycles. Enter sending then said finished, turned off. With the help of this video…!!! I did a factory reset.. and. WALA! Selected language and away we go! Seems our stinky xfinity internet has been wonky all day causing problems w washer computer, and controlling via app. T goodness for this video just saved us from calling Maytag and a service call to have them do a factory reset!
My washer is the same one you are showing in the video. It will not hold water it continues to try to wash with no water. What do i do to fix that? Thank you
Had an over flow event in this same washer . Like 20 gallons of water in the machine , spilling onto the floor. It kept tripping the gfci so I had to vacuum it out with my shop vac . Tool back panel off . Everything was dry . Plugged it back in worked fine . Next day it won’t fill.
I have this exact washer and I'm getting an f3 e2 I'm just wondering where that pressure hose is I've got the back off is there a clear line next to the electrical line leading to the drum?
Where can I find instructions for this thing. I can’t make it stop and soak. When if stops due to an unbalanced load, it starts over. No way to get it to just spin after a rebalancing load. It also chewed holes in two clothing items.
I have a Maytag Automatic Washer bought in 1979. Believe it or not it is still running with only minor repairs since. Recently I interrupted the power supply during a cycle by changing outlets. After this it just continuously goes through all the cycles but never drains. I must have damaged some part. Would you know what part may have been damaged so I might replace it?
Hi. I have this same washer i had this error before once and i hars reset and worked fine. The error came when new. F7E4. It stoped working. Its sensing and no water fill. Thwn stops washing complete and like drains. Ive order a part w10754448 replaced it. And still doing same thing. Any help? Thanks in advance.
Same washer! Keeps showing ‘please rotate then know to an available cycle’ knob rotated nothing changed. Power disconnected for 24hours still not working. Factory reset not working.
If it ever breaks, have it fixed! Don’t do what we did and buy one of these new machines. Ours is 2 years old and I’m here to learn how to take it apart to fix it myself because it’s direct drive electric motor is already having problems and nobody can get to it *FOR SIX WEEKS.*
@@aaronmacy9134I agree with you 100%. Things produced recently suck - and this applies to every item of any field.Karl Marx predicted this happening over 150 years ago.
where can I find a list of component activation tests for a specific Maytag model, doesn't seem to be in the owners manual or on the Maytag website. I have a mhw8630hw that was giving a Lo FL error that was because the cold water valves had failed. It took a long time to determine this and knowing the tests would be helpful! on my model each test is only listed as 1,2,3-upto 12 with no words. Anyway replacing the valve with a $17 part off amazon fixed the issue but it would have been great to be able to run the diagnostic ahead of time to know it was a valve failure.
Great video and helpful advice. I recently purchased this exact Maytag washer, it's working fine, but two things...First, for the last few loads I've washed when a load finishes, the washer automatically turns off, is that normal? And what should the washer say when a load is finished?
@@emmathenia1495 Oh Ok, well glad I now know. Thank You for the reply, I was about to sign off for the night and saw your reply right before. Anyway, may you have a good evening.
This is my exact machine and this is a very helpful video if it applied, but what about when there is zero power. The outlet is good, tried every reset possible on the machine (mentioned here and other videos) and nothing happens. I can't access this mode because the panel won't activate at all. Any advice at this point? I think it needs a new control panel and it's stuck on Lock because it died mid-cycle. Any other help available?
@@bensappliancesandjunk Thank you for the reply. We opened the top panel and looking at the Control Panel there is no green flashing light. Going to order a new CP and attempt a replacement. Maytag should rethink where they place their model and serial number sticker for the cases where the lid gets locked and you cannot access it!
@@bensappliancesandjunk Same problem happened with me. I replaced the Control board and now there's power to the board but after almost every button press, the unit restarts itself. I cannot do anything on this unit. I tried unplugging the unit for 10 minutes and trying again. Same thing happens. I cannot drain the water in the basin. I cannot go into service mode because it restarts before I get in. Any help would be appreciated.
Hey Ben. Love your videos. I have a a Maytag washer with this display and I have an F7E1 code. I replaced the tachometer (actuator) and the cam it connects to. I still have the same issue. Any ideas?
Same washer and error here! I replaced the shifter. The belt and stuff on the back look fine. 4 years old(?) Turns out my shifter was not broken. Cleared faults. Factory reset. Testing mode ... drum will not spin. Can't figure this one out. I want a washer from the 80s!!!
I have this washer and lts sensing and no water fill then says washing complete and like drains. Ive order a part w10754448 replaced it. And still doing same thing. Any help? Thanks in advance
I keep getting the F0E7 error code when trying to run the clean cycle. Seems simple take clothes out of washer. Only thing no clothes in washer. Thoughts?? Any help much appreciated.
My washer just like this, after I did a small load, just gave me the flashing colon w/zeros and I had to unplug to clear it. Does this mean trouble is coming?
Hey man you helped me fixing a washer with a different video I figured to get a response I’d come to a new video. You saved me a lot of time and money I’d like to make make a donation if possible please let me know how I could.
My washer which is the model in this video keeps showing close lid. I run through all these codes and it gives me no error code but the lid won’t lock and keeps saying close lid. I even bought a new hinge to replace it but still same thing”close lid” please help!!!
Have a Maytag MVW6230HC that if there is anything more than half a load and it’s on Normal/bulky/heavy it just continues to “sensor” while trying to rinse. The load will be soaked and it will be a chore to get it to spin out. Sometimes you can put it on quick wash and it will run through. I ran the diagnostic and there were no fault errors listed. I also did the diagnostic cycle and nothing came up. The barrel when washing looking a loose and I don’t know if the barrels are meant to be super loose. Could that be a reason for the sensor issue? Great video by the way, it’s very helpful and informative!
Hi, yes, a loose drum could cause that. Usually if there's a mechanical fault, codes aren't going to show up because there isn't a sensor alloted to the issue. I'd check the tub nut in the drum for possible issues. Additionally, I have a video about the sliders underneath the Direct Drive styles, those can cause a ton of problems.
Hi Ben, I have liked and subscribed your channel because your video is very helpful. My Maytag washer is MHWE201YW00, everything works fine, but it skips spinning to extract the water out of the wet clothes. To spin the drum, I wait until the washing cycle finishes then select the spin function only to spin and extract the water. I unplugged the power many times but no luck. Can you show me how to run the diagnostics so I can find out what prevents it from spinning for this specific model. Right now there is no code. Thank you.
Great video! Thank you very much. My whole unit control panel appears to not have any power (even after attempting to unplug/replay and service tech mode). Any tips for opening the lid if it’s closed shut?
Watch my video on how to open the top of the lid up from the chassie. That's the only way you're going to do it to bypass the leadlock without causing any damage.
Checked washer it was off the washer is still full of water and locked and won’t power on. Do you have any ideas of what might be the issue. Would appreciate any help. I unplugged and plugged a fan in so it’s not the outlet. Thank you for your time, god bless you for your helpful videos
I have this washer, and it is leaking at the bottom. I’m going to try going through the diagnostic process and see if that sheds any light. The idea of “fixing” this is very intimidating
my code is not on here... it basically is the capital letter A in what looks like a basket with a til "~" sign over it.. this goes on before and after the machine is locked with clothes. please help :(
I have the Maytag MVW6230HC0 model control board. Can I use any of the alternates from Whirlpool? The one online seller lists it very expensive, yet it looks the same as the ones for Whirlpool. The board locked up and has a little heart symbol on the screen.
@@domingamckinney-cofield1456 ...Yes, I tried an alternate off Amazon that turned out to be slightly different, and so the cheaper alternate didn't work. I went on Ebay, and bought a used board with the exact original model number, taken from a recycled unit (but had a 90 warranty). It was a little more expensive... about $100. But it works perfectly now.
Ben, i have this same washer, and i get no power to the touch screen. I have 120 to it, but Nothing there, so i cant get into diagnostic mode. Would you assume touch screen bad?
Could be. I'd check the control board. It should have a flashing green light on the board if the board has power and is running. If it has the green light, then its the UI. If it doesn't, its the board.
This washer is awful. If you have a choice, don’t buy it. You can’t just set a load for how you want it and go do other chores. You have to stand and babysit the machine for over an hour while it “senses” and doesn’t fill and fills partially with the wrong temperatures, and tries to agitate with no water and has no rinse cycle except a couple of spritzes of water during the spin. Doesn’t fill all the way and then instead of agitating, it dumps water all over the floor. It’s terrible. Garbage. Complete garbage.
Agree. I biggest piece of junk ever. In normal world, the company that would br selling such junks would be required to refund the entire amount to the customers and pay extra for damages. In this crazy world, however, the blame is shifted on buyers while the owners of the company make millions and they ate not worrying about facing any consequences.
Can confirm! This washer is garbage. I have to make sure all my clothes are wet before I begin a cycle so it will add more water because it thinks the load is heavier than it is.
@@alexandriav3956just leave it on Colored clothes and set water level to "Max Fill" and you will only have to adjust your water temp and wash time...
I have been leaving it on colored clothes and setting it to Max Fill....it's the only way the clothes come clean. Id love to throw this machine through Maytag's Corporate office front window..
@@daveanderson2833 will try it thanks, there should be a hack just to make the sensing sensor think all the time there are tons of clothes, I bought this stupid machine thinking it was better than my old GE worst mistake ever....
@@mrld3005this washer is actual garbage. I hate it so much. I have the faucet in my washer so I’ll turn that on when I load the clothes, make sure they’re all wet, then turn the washer off so it drains. I then run a wash cycle so it maybe thinks the clothes are heavier than they are. No idea if it’s even worth doing.
On my Maytag model MVW7230HWO washer I changed the motherboard and now I have a code F2E2 displayed and nothing I do removes it from the screen I tried unplugging it for 1 minute The machine has down for about 3week while waiting on the new motherboard so how do I reset the machine so I can use it
Is your dryer a gas dryer? because if ti is electric it does use 240V and not 120V. The first thing is to disconnect power for about one minute and reconnect power. If that doesn't solve the problem. You could have a latch mechanism, water pump or even the main board.
Try to disconnect the user interface from the main controller and then reconnect them it if works it is ok. Or the user interface needs to be replaced.
I purchased this washer in the Summer of 2020. Within the first year we had to replace the display panel. Nearly 4 years later we had to replace the ACU. Now that it has been replaced, the machine gets stuck on the spin cycle. When I do laundry, I have to turn off the machine and use the Drain/Spin feature to complete the cycle. We have called Whirlpool about the issue, and they thought the system needed a software update. It shows that there are no updates needed at this time, but it still gets stuck on the spin cycle. They have sent out a tech twice, but nothing seems to work. We have been dealing with this for nearly a month with no resolve. I'm ready to give up and purchase a new washer. I am now questioning my faith in the Whirlpool/Maytag brand.
Mine will sense for washing then go straight to wash complete and hasn’t done a thing I’ve done a factory reset and cleared any error codes… what else can I do???
Ben way wont it fill .l bought this new .l have try all setting to get the right way l wont it to work for me .what it does does .is turn on heavy washer .water comes on but cant see any water then it starts to beat the close with out any water . .can the custom mode video .will it let the machine fill with water before washing .please get back to me.
@@bensappliancesandjunk mabye just a bone basic frigadaire fridge because thats what i have and also mine is from 2006 so if you want i can tell you the model
thank you man i know how to do it keep some update there some rumor on maytag because ge got the all in one washer and dryer combo will see what happen
we have this washer, it is the worst thing we bought in over 60 years., we basically got stuck with it do to covid when a few people got sick and everyone turned crooked
There is a diagnostic code manual hiding in the plastic pocket inside the front panel of your washer. There might be another one on the back of the washer. It's crazy.
Really appreciate helping others repair their own stuff and supply the information needed for these new advanced models. Many thanks, subscribed!
Been in the appliance service business 32 years. Love Your videos. Man, you are killing it for a job.
Thanks! We're getting a new shop soon so I can get my hands on some newer stuff to test and tear down like the GE WD Combo w/ heat pump. Also got a GE SmartHQ to test on it too!
@@bensappliancesandjunklooking forward to it hope you can get the all in one whirlpool too
help them...please ...no codes just my knob won't work
help them...please ...no codes just my knob won't work
@@Kam-p8f unplug live unplugged for one hour . User interface pull the knob off put back on.
I used one of your old videos to get a dryer going , an old Frigidaire. As soon as you used the phrase "a criminal amount of lint" I hit subscribe... my wife is a nonbeliever of the correlation between a dryer working and a clean dryer
I have that washer, its sucks
It does, we call it The Knot Master 1000
Yes!!! 1000%!!!
And what’s worse is trying to get the technicians to fix it! The warranty company is awful! The whole reason to buy the warranty was so I didn’t have to fix it myself!!! I will never buy another one and I will never own another Maytag!!!
I have this washer …bought new in February. Tore up on July 4th…took 55 days to fix. Tore up again and now Maytag says gotta go to “product review board” to find a resolution. The repairman said they would replace it. Company is absolute joke.
I have this washer. It will not work right
I'm disappointed with this washer too. It's horrible.
Beautiful. Just beautiful. Your videos have saved me hundreds of dollars.
Wonderful!
On behalf of my daughter, I wanna say thank for your help we managed to get school clothes ready.
Great Video! Thanks for sharing. I was quoted $500 to repair this junk! The new one costs $700
Thanks for this helpful video. My question how do I get my machine out of soaking mode?
Purchased this washer/dryer less than 6 months ago.. washer would not leave sensing mode, error said clothes detected during afresh cleaning cycle. And washer screen stuck on clean washer reminder.. unplugged, turned on off turned to different cycles. Enter sending then said finished, turned off. With the help of this video…!!! I did a factory reset.. and. WALA! Selected language and away we go! Seems our stinky xfinity internet has been wonky all day causing problems w washer computer, and controlling via app. T goodness for this video just saved us from calling Maytag and a service call to have them do a factory reset!
Will not connect washer to WiFi or App for a bit. Internet connection is still spotty
My washer is the same one you are showing in the video. It will not hold water it continues to try to wash with no water. What do i do to fix that? Thank you
Thank you, thank you for this wonderful video!!! My washer is now working!
Had an over flow event in this same washer . Like 20 gallons of water in the machine , spilling onto the floor. It kept tripping the gfci so I had to vacuum it out with my shop vac . Tool back panel off . Everything was dry . Plugged it back in worked fine . Next day it won’t fill.
Diagnostic mode is ultra helpful can’t compare to other manufacturers
We have one of these. Always thought you couldn’t go wrong with a maytag. Boy was I wrong. Absolute garbage!
Same here. Had it for 2 years and had to fix the speed sensor twice, complete junk!!
I’m so regretting spending all this money on a piece of garbage,I want my old kenmore back!
Thanks!
I actually love this washer and this video helped me SOOO MUCH. Thank you!!!
Just a single momma trying to get the load to wash 😂 ty kindly!!
Hope it helped!
Same my friend! I’m about to attempt to figure it out too!
I’ve had this washer 2 years. Today it’s not powering on and can’t get my wash out of the drum as lid won’t open. Any help?
I'm here for the same reason. Mine just did the exact same thing. Hopefully we can get some help from the comments.
@@joseplascencia9546 Did yall get any help or diagnostic? That is why I am here today @ernelmontgomery34
Did you get an answer to why this is happening? That is what I am experiencing today...
I’m here today with a full washer that stopped working with a blank screen also!
You sir just saved me a bunch of money thank you so much! 💛
I have this exact washer and I'm getting an f3 e2 I'm just wondering where that pressure hose is I've got the back off is there a clear line next to the electrical line leading to the drum?
Excellent video! Thank you!!
I just replaced the clutch now it only fills up with water, do I have to reset the machine? Or recalibrate?
Where can I find instructions for this thing. I can’t make it stop and soak. When if stops due to an unbalanced load, it starts over. No way to get it to just spin after a rebalancing load. It also chewed holes in two clothing items.
I have a Maytag Automatic Washer bought in 1979. Believe it or not it is still running with only minor repairs since. Recently I interrupted the power supply during a cycle by changing outlets. After this it just continuously goes through all the cycles but never drains. I must have damaged some part. Would you know what part may have been damaged so I might replace it?
Thank you. Very informative.
Hi. I have this same washer i had this error before once and i hars reset and worked fine. The error came when new. F7E4. It stoped working. Its sensing and no water fill. Thwn stops washing complete and like drains. Ive order a part w10754448 replaced it. And still doing same thing. Any help? Thanks in advance.
Same problem here, any luck?
@@Cruising200 no unfortunately not yet, i just purchased a new one.
@@rudy2ndjr ok thanks
I have the same problem this is the 2nd time I fix it and it’s the same thing 😢I’m giving up it’s only 4 years old
Same washer! Keeps showing ‘please rotate then know to an available cycle’ knob rotated nothing changed. Power disconnected for 24hours still not working. Factory reset not working.
Same ..have you fixed it! Help
It’s covered by warranty. Waiting part for replacing panel.
I purchased mine from someone off of Facebook...no warranty 😭
@@Kam-p8f Better buy from Costco with extra 1year warranty.
When I go into the diagnostic mode it won’t run the diagnostic cycle or the factory cycle. Any ideas?
My Maytag washing machine and dryer have so far lasted 26+ years.
If it ever breaks, have it fixed! Don’t do what we did and buy one of these new machines. Ours is 2 years old and I’m here to learn how to take it apart to fix it myself because it’s direct drive electric motor is already having problems and nobody can get to it *FOR SIX WEEKS.*
Ihad a big old Commercial pre millennium model. Needed a fill sensor I believe. Really wish I wouldn't have scrapped it. This one...JUNK
@@aaronmacy9134I agree with you 100%. Things produced recently suck - and this applies to every item of any field.Karl Marx predicted this happening over 150 years ago.
where can I find a list of component activation tests for a specific Maytag model, doesn't seem to be in the owners manual or on the Maytag website. I have a mhw8630hw that was giving a Lo FL error that was because the cold water valves had failed. It took a long time to determine this and knowing the tests would be helpful! on my model each test is only listed as 1,2,3-upto 12 with no words. Anyway replacing the valve with a $17 part off amazon fixed the issue but it would have been great to be able to run the diagnostic ahead of time to know it was a valve failure.
Great video and helpful advice. I recently purchased this exact Maytag washer, it's working fine, but two things...First, for the last few loads I've washed when a load finishes, the washer automatically turns off, is that normal? And what should the washer say when a load is finished?
It is normal for that to happen. It turns off after about 5 minutes. When the cycle ends it says " Washing complete".
@@emmathenia1495 Oh Ok, well glad I now know. Thank You for the reply, I was about to sign off for the night and saw your reply right before. Anyway, may you have a good evening.
This is my exact machine and this is a very helpful video if it applied, but what about when there is zero power. The outlet is good, tried every reset possible on the machine (mentioned here and other videos) and nothing happens. I can't access this mode because the panel won't activate at all. Any advice at this point? I think it needs a new control panel and it's stuck on Lock because it died mid-cycle. Any other help available?
Check for green flashing light on the control board itself. If no light = board or wiring to board is bad.
If green light = check for VDC going to UI
@@bensappliancesandjunk Thank you for the reply. We opened the top panel and looking at the Control Panel there is no green flashing light. Going to order a new CP and attempt a replacement. Maytag should rethink where they place their model and serial number sticker for the cases where the lid gets locked and you cannot access it!
@@bensappliancesandjunk Same problem happened with me. I replaced the Control board and now there's power to the board but after almost every button press, the unit restarts itself. I cannot do anything on this unit. I tried unplugging the unit for 10 minutes and trying again. Same thing happens. I cannot drain the water in the basin. I cannot go into service mode because it restarts before I get in. Any help would be appreciated.
Hey Ben. Love your videos. I have a a Maytag washer with this display and I have an F7E1 code. I replaced the tachometer (actuator) and the cam it connects to. I still have the same issue. Any ideas?
Mine is giving this now.
Same washer and error here! I replaced the shifter. The belt and stuff on the back look fine. 4 years old(?) Turns out my shifter was not broken. Cleared faults. Factory reset. Testing mode ... drum will not spin. Can't figure this one out. I want a washer from the 80s!!!
I have this washer and lts sensing and no water fill then says washing complete and like drains. Ive order a part w10754448 replaced it. And still doing same thing. Any help? Thanks in advance
I keep getting the F0E7 error code when trying to run the clean cycle. Seems simple take clothes out of washer. Only thing no clothes in washer. Thoughts?? Any help much appreciated.
I get the same thing this washing machine is the biggest piece of shit I ever owned in my life
Really helpful video 👍👍
My washer just like this, after I did a small load, just gave me the flashing colon w/zeros and I had to unplug to clear it. Does this mean trouble is coming?
What do you have on the MVW6200KW0 won't shut off power at the control panel, and will not complete the cycle and lock the door.
Hey man you helped me fixing a washer with a different video I figured to get a response I’d come to a new video. You saved me a lot of time and money I’d like to make make a donation if possible please let me know how I could.
My washer which is the model in this video keeps showing close lid. I run through all these codes and it gives me no error code but the lid won’t lock and keeps saying close lid. I even bought a new hinge to replace it but still same thing”close lid” please help!!!
Have a Maytag MVW6230HC that if there is anything more than half a load and it’s on Normal/bulky/heavy it just continues to “sensor” while trying to rinse. The load will be soaked and it will be a chore to get it to spin out. Sometimes you can put it on quick wash and it will run through.
I ran the diagnostic and there were no fault errors listed. I also did the diagnostic cycle and nothing came up.
The barrel when washing looking a loose and I don’t know if the barrels are meant to be super loose. Could that be a reason for the sensor issue?
Great video by the way, it’s very helpful and informative!
Hi, yes, a loose drum could cause that. Usually if there's a mechanical fault, codes aren't going to show up because there isn't a sensor alloted to the issue. I'd check the tub nut in the drum for possible issues. Additionally, I have a video about the sliders underneath the Direct Drive styles, those can cause a ton of problems.
We need a recall
How can you eliminate the washer cleaning program? Ours will not allow us to run a washing cycle until we run the self cleaning function.
what does F3 F2 on that same exact washing machine mean?and how can I fix it?
It is related to water pressure sensor, could be the hose that is not connected properly or it has a hole, or you have a defective board.
My Maytag dryer has lost audio, everything else seems to work. How can I perform a factory reset?
yes, Maytag is garbage, washer & dryer both had major issues within 2 years. Cheaply built with very expensive to repair.
I have this washer and the lid wont close flat. I have to hold it down to start wash cycle. How can I get the lid to lay flat like normal?
I have this washer. Mine stopped mid cleaning cycle and now won't power on. So hopefully this video will help me.
Did it help?
Mid cycle, mine like this lost the main control board when that happened
Hi Ben, I have liked and subscribed your channel because your video is very helpful. My Maytag washer is MHWE201YW00, everything works fine, but it skips spinning to extract the water out of the wet clothes. To spin the drum, I wait until the washing cycle finishes then select the spin function only to spin and extract the water. I unplugged the power many times but no luck.
Can you show me how to run the diagnostics so I can find out what prevents it from spinning for this specific model. Right now there is no code. Thank you.
That unit is quite old. I dont have any diagnostic videos for it and Im not sure if they can do diagnostics.
My washer showing code F0E9. Can I reset or fix myself without having to call out a service tech?
Can you provide a link to where you get the list of error codes and what tests to perform that you showed in the video?
Mine will not run cycles but will say washing complete any suggestions please and thanks
My washer keeps saying F7E3 this is the 2nd time in four years and now it don’t want to work. What should I do pay 500 to fix again
Just wondering how I run the test six I'm getting the f3 e2 code think it says that's the pressure hose fault
Hey Ben the slot where the bleach goes...the bleach is just standing as if its clogged? What do i do? The bleach wont drain
Great video! Thank you very much. My whole unit control panel appears to not have any power (even after attempting to unplug/replay and service tech mode). Any tips for opening the lid if it’s closed shut?
Watch my video on how to open the top of the lid up from the chassie. That's the only way you're going to do it to bypass the leadlock without causing any damage.
Checked washer it was off the washer is still full of water and locked and won’t power on. Do you have any ideas of what might be the issue. Would appreciate any help. I unplugged and plugged a fan in so it’s not the outlet. Thank you for your time, god bless you for your helpful videos
I have the same exact issue right now
@@hector64259 Did you figure out a resolution? That is why I am here..
Did you figure out a resolution? That is why I am here..
Could i use the diagnostic cycle immediately or do i have to have tools on the side to prepare it something goes wrong?
I have this washer, and it is leaking at the bottom. I’m going to try going through the diagnostic process and see if that sheds any light. The idea of “fixing” this is very intimidating
Hey, I ran a diagnosic cycle, it filled a bit and then went off, no fault code.... now what would you recommend I run?
Either bad board or a wire is damaged - I am seeing a lot of issues where wires are breaking at the drain pump and other areas.
What if my f2e2 code won't go away, even after I kept it unplugged and replugged it back in?
I have tried the DMLS calibration and it does not go past cycle/Spinning. What are my options?
Did you check or find error codes?
my code is not on here... it basically is the capital letter A in what looks like a basket with a til
"~" sign over it.. this goes on before and after the machine is locked with clothes. please help :(
How about for the equivalent dryer?
Why does the little shift actuator arm keep disconnecting from the splutch/clutch?
They made a huge run of them wrong. You can zip/cable tie it to lock it into place. The only other solution is purchas e anew shift actuator
I have the Maytag MVW6230HC0 model control board. Can I use any of the alternates from Whirlpool?
The one online seller lists it very expensive, yet it looks the same as the ones for Whirlpool. The board locked up and has a little heart symbol on the screen.
Did u ever get it fixed. If so, what did u do?
@@domingamckinney-cofield1456 ...Yes, I tried an alternate off Amazon that turned out to be slightly different, and so the cheaper alternate didn't work. I went on Ebay, and bought a used board with the exact original model number, taken from a recycled unit (but had a 90 warranty). It was a little more expensive... about $100. But it works perfectly now.
What if its "stuck on please turn knob to select cycle" but i turn the knob and it doesnt work
My washer is currently show “F2E2 Contact service” it won’t even let me enter the diagnostics mode
too bad there is not a way to change the value for the clean cycle. Increase it to 40 instead of 30. great video saving this one for sure!
That would be a good one. These companies really need truly cusomizable cycles that let you pick eeeeeeeeeeverything via an app.
I need help! After I did the DLMS calibration cycle, my washer won’t start a regular cycle! I
Check error codes and see what pops up
Ben, i have this same washer, and i get no power to the touch screen. I have 120 to it, but Nothing there, so i cant get into diagnostic mode. Would you assume touch screen bad?
Could be. I'd check the control board. It should have a flashing green light on the board if the board has power and is running. If it has the green light, then its the UI. If it doesn't, its the board.
Is there a way to cancel the cleaning cycle?
Mine doesn’t display anything what can I do? It turns on but can’t see anything on it
Mine starts the load but water never goes in and after a few seconds it say load completed
This just happened to me today. Not even 2 years
I’m having the same exact issue. Were you able to find a fix for this?
@@stephaniecaldwell2779 after resetting an such.. we called a guy to replace some part for $200ish job.
This washer is awful. If you have a choice, don’t buy it. You can’t just set a load for how you want it and go do other chores. You have to stand and babysit the machine for over an hour while it “senses” and doesn’t fill and fills partially with the wrong temperatures, and tries to agitate with no water and has no rinse cycle except a couple of spritzes of water during the spin. Doesn’t fill all the way and then instead of agitating, it dumps water all over the floor. It’s terrible. Garbage. Complete garbage.
Agree. I biggest piece of junk ever. In normal world, the company that would br selling such junks would be required to refund the entire amount to the customers and pay extra for damages. In this crazy world, however, the blame is shifted on buyers while the owners of the company make millions and they ate not worrying about facing any consequences.
Hi, please tell me what I need to do with f3e3 ? Thank you for your video!
Did you get a answer. How do you know
I have just purchased this washer and it’s a large capacity washer but I’ve never seen more than 6 inches of water? Am I doing something wrong?
Need to put it on MAX FILL. Otherwise it will only add water based on the weight of the clothes you put in. These machines are absolutely the worst.
Can confirm! This washer is garbage. I have to make sure all my clothes are wet before I begin a cycle so it will add more water because it thinks the load is heavier than it is.
@@alexandriav3956just leave it on Colored clothes and set water level to "Max Fill" and you will only have to adjust your water temp and wash time...
I hate this washer is there any way to remove sensing? and just make it wash with lots of water always?
I have been leaving it on colored clothes and setting it to Max Fill....it's the only way the clothes come clean. Id love to throw this machine through Maytag's Corporate office front window..
@@daveanderson2833 will try it thanks, there should be a hack just to make the sensing sensor think all the time there are tons of clothes, I bought this stupid machine thinking it was better than my old GE worst mistake ever....
@@mrld3005this washer is actual garbage. I hate it so much. I have the faucet in my washer so I’ll turn that on when I load the clothes, make sure they’re all wet, then turn the washer off so it drains. I then run a wash cycle so it maybe thinks the clothes are heavier than they are. No idea if it’s even worth doing.
@@alexandriav3956 I just discovered that putting them on bulky fills the whole thing but takes more than an hour !
On my Maytag model MVW7230HWO washer I changed the motherboard and now I have a code F2E2 displayed and nothing I do removes it from the screen I tried unplugging it for 1 minute The machine has down for about 3week while waiting on the new motherboard so how do I reset the machine so I can use it
I’m literally having the same problem. What’d you do?
Factory reset it
Would this apply for model number MVW7230HW0
Thanks Ben
At if you run all diagnostics all test and it then says at the end wash end.
My washer won’t turn on, is locked and has clothes inside. the power is on because the dryer is working just fine. Please help. What do I do next?
Is your dryer a gas dryer? because if ti is electric it does use 240V and not 120V. The first thing is to disconnect power for about one minute and reconnect power. If that doesn't solve the problem. You could have a latch mechanism, water pump or even the main board.
Hi. Where can I download the error code list? The error code F7E4 was cut off in the middle on the video. Thank you!
F7E4 = motor drive module over voltage from the sheet inside my washer. I can't help you further on that.
Why does the little hook on the actuator that connects to the motor keep coming off?
They had a few have that issue. You can zip tie it on or replace the actuator with the older black style that somehow don't have the issue
Mine keeps turning off saying cycle complete. Literally wont kick over. What do i do?
Same. What did you do to fix it?
I need help but with my dryer.. any videos on that?
Not on this style yet sadly
I have a code F2E1 stuck button. What needs to be replaced?
Try to disconnect the user interface from the main controller and then reconnect them it if works it is ok. Or the user interface needs to be replaced.
I purchased this washer in the Summer of 2020. Within the first year we had to replace the display panel. Nearly 4 years later we had to replace the ACU. Now that it has been replaced, the machine gets stuck on the spin cycle. When I do laundry, I have to turn off the machine and use the Drain/Spin feature to complete the cycle. We have called Whirlpool about the issue, and they thought the system needed a software update. It shows that there are no updates needed at this time, but it still gets stuck on the spin cycle. They have sent out a tech twice, but nothing seems to work. We have been dealing with this for nearly a month with no resolve. I'm ready to give up and purchase a new washer. I am now questioning my faith in the Whirlpool/Maytag brand.
My impression is that this washer is becoming the most hated one on the market by techs
This washer is definitely the worst. I've never in my life purchased a larger piece of junk.
Consumers also@@bensappliancesandjunk
Thank you
Mine will sense for washing then go straight to wash complete and hasn’t done a thing I’ve done a factory reset and cleared any error codes… what else can I do???
Mine too. What did you do to fix it?
@@KeishaLewis-38mine too!!! How did you guys fix it?
Ben way wont it fill .l bought this new .l have try all setting to get the right way l wont it to work for me .what it does does .is turn on heavy washer .water comes on but cant see any water then it starts to beat the close with out any water . .can the custom mode video .will it let the machine fill with water before washing .please get back to me.
Yes mine does the same .l hate the washer .there should be a recall on them
Code F8E1 what needs to do ?
I need help with this error, you have a solution bro?
Just got this washer had 30 day warranty.. my machine messed up 60 days later its not powrring on😢
When we get to entering service mode we get a blank screen
What does that mean🤷🏽♀️
Never mind we got it to work🤦♀️
hey man you should make a video about what happens if the fridge and freezer temperatures are to cold and to high.
I'm not sure what you are wanting exactly? That will vary by model
@@bensappliancesandjunk mabye just a bone basic frigadaire fridge because thats what i have and also mine is from 2006 so if you want i can tell you the model
I’m having problem that it won’t spin fast .
thank you man i know how to do it keep some update there some rumor on maytag because ge got the all in one washer and dryer combo will see what happen
If they make one ill buy and review. I will have the review for the GE this week.
we have this washer, it is the worst thing we bought in over 60 years., we basically got stuck with it do to covid when a few people got sick and everyone turned crooked
F6E3 code can u help .
Never again Maytag!!
do anyone know where i can get these manuals he is talking about
There is a diagnostic code manual hiding in the plastic pocket inside the front panel of your washer. There might be another one on the back of the washer. It's crazy.