3D Printed 750% Scale Dummy 13
Вставка
- Опубліковано 23 чер 2024
- Mr Campbell Prints Children Toy Fund:
www.justgiving.com/crowdfundi...
I'm diving into the world of extreme scale models with this 750% scale dummy 13 model. This incredible model stands at a 1.2 meter tall with its towering size, allowing you to see every intricate detail up close. Watch as I explore the features, design, and functionality of this larger-than-life dummy 13 model. Whether you're a collector, enthusiast, or just love impressive scale models, you won't want to miss this in-depth build and stick around for the Glamourshots / short Movie. Subscribe for more fascinating content on all things 3d Printing.
/ mrcampbellprints
mrcampbellprints.etsy.com
/ mrcampbellprints
than.gs/u/1397003
cults3d.com/en/users/MrCampbe...
/ mrcampbellprints
Intro/Print Settings - 00:00
Frame Support Removal - 01:03
Amour Support Removal - 05:55
Assembly - 08:04
Neck and Head Assembly - 10:48
Leg Assembly - 11:22
Arm Assembly - 13:25
Neck and Head Assembly - 15:02
Glamour shots/Short Movie - 16:00
#3DPrintedFigures #ArticulatedCollectibles #CollectorEdition #PrecisionCraftsmanship #GeekArt #ToyEnthusiast #LimitedEdition #HighTechCollectibles #FigureArtistry #DynamicPoses #3DPrintingExcellence #MakerBotMagic #UltimakerCraftsmanship #FormlabsArtistry #SculpteoInnovation #PrusaMastery #bambulab #polymaker #esun #sunlu #printables #soozafone #animist #dummy13 #titan13 #toys - Розваги
4:25 At this point I think you could just give him a normal sized knife xD
Great Work!
Lol, I was thinking the same, I did try, but handles on the ones I had were either too small or too large
Now you gotta give him a face
If you watch the short movie, It looks like he might take mine lol
Now thats the real t23
Thanks
Amazing video
Glad you think so!
Cool, made one in 600%, largest ive seen online was 1337%
Looks like I have to beat 1337%
Good vid man you have a new subscriber!
Thank you so much
I was gonna make a big t13, BUT NOT THAT BIG
Like they say go big or go 750% lol
@@MrCampbellPrints lol
What 3d printer did you use? Please I need it my 3d printer is broken so I’m trying to replace it.
Bambulab p1s
Where did you find the print model at
Printables.com
Nice.
Thank you! Cheers!
Man i gotta print this !!! How many rolls of filament did it take ??
Only 2.5 rolls
I just did one at 200% and had 4 pieces to break. The Frame chest female connector broke while trying to add the head, and 3 of the knee elbow connectors broke while trying to connect one of the knees. The parts that broke were all printed using PETG. I used Glow in the dark PLA for the armor bits. I will use my heat gun on the replacement parts. Thanks for the advice. Cheers!
No worries let me know how it goes
@@MrCampbellPrints Went great! I overheated one of the leg connections and it was a bit too loose. I just popped it off and reheated it. Closed it up a bit and it stiffened right up. Thanks again!
Wow. If you go any bigger, it's probably worth printing the top of a ball as a seperate part to screw into the bottom?
Good idea
Would love to see one life size, whatever scale to make it about 6 feet tall.... probably about 1200% since its normally about 6 inches.
🫡
Do a video of all little dummy vs the 750%
I see you're a fan of the underdog, lol
You should have yoused tree supports would have saved some time money and work . (Unless you’re already using tree supports) and what infill% did you use
I used 10% infill, I tried tree supports, but I found the quality of the print was better with just standard support
I want that it's so cool
Thanks
@@MrCampbellPrints What type of printer do you have I might buy that one Or not if it's too expensive
Bambulab p1s
That thing jig as me if not bigger
you need to rotate it 180 angle
Are you referring to the armor
There’s an evangelion remix of dummy 13, I wonder how that would look at 750%🤔
I think it would look great
How do you deal with the loose joints after a while
You can add a thin lay of Super glue or equivalent and let it dry and keep adding layers
@@MrCampbellPrints thanks for the tip🔥
If you use super glue, you have to either disassemble it before applying the glue, or apply it to the joint and keep wiggling the joint until it is completely dry, which takes longer than you think. The better solution is pledge floor wax. You just drop a few drops into the joint while it is still assembled. wiggle the joint to spread it and then let it sit for about 2-3 hours to dry. If its still loose, apply again. Because its not adhesive, you never have to worry about the joint seizing up.... Old trick learned from the Star Wars figures back in the 70's.....
@@wcbyrdiv Very helpful 🤝🔥
U should sell those
I will be selling them soon
Now that is a n13 titan if I say to my self and I like how it's big I never saw one maybe you can make a another one and have a stop motion fight just saying for idea
It's not a bad idea, but it's so big and heavy that the limbs don't stay in place, but it is probably down to me just down to me sanding down parts to fit. Thank you for the support
Im trying to print The Dummy 13 action figure using the Cura software with my Ender 3 v3 se, But the parts especially the crotch doesn't seem to fit. If anyone knows the Ultimaker Cura Settings for the print in specific detail, please give me an answer. I Don't wanna waste anymore filament. i wanna scale it to 300% IDK what im doing wrong! why isn't this working for me?
I use the same settings that I printed this size dummy 13 on the 150% and 400% scale that I have printed mabey them
Have a play with the Horizontal Expansion. I used -0.1mm when I printed at 173%
Where can I buy one?
mrcampbellprints.etsy.com/listing/1692155915
❤❤❤❤👍👍👍👍 классный
Thank you
My thumbs are so sore after assembling this at 100% percent scale! And the legs aren't even done!
Once you do a few, you get used to it and fet those 3d printed muscles pumping. Lol, thanks for the support
I do also think because I wasn't using PETG for the frame instead I used PLA lol. Still going well though.
you did put the abdomen on the wrong side
I'm not sure I did
@@MrCampbellPrintsit is the wrong way round
Attack on titan but t13 figs
😆
@@MrCampbellPrints i subbed to your channel
DO 1000%
I want to go bigger
Yeahhhhhhh that's SICK tho
Can you print me one?
😅
I'm leaving a comment
I'm leaving a reply lol
If you did a 1000% you woud have no room in your house
Mabey I'll make a bigger one.......
Hi 😅
Hey there
How are you?
Fbr5*afwrdsgsfst*wr
sticky bot are beter
😅
Nah bruh I printed one to see for my self and the print is so good
Can you print me one?
😇
Yes, or no
Please
Please