Це відео не доступне.
Перепрошуємо.
Honda Rancher Crankshaft part 2 of 4 engine rebuild
Вставка
- Опубліковано 22 січ 2014
- 2007-2013 Honda Rancher 420 crankshaft engine rebuild. We repair 420 crankshaft. complete engine rebuild on the Honda rancher 420 crankshaft. DIY you can do it yourself crankshaft rebuild. or if your working on the top end step by step installation..
Wow nice very detailed
what i like to do is let the crankshaft sit in the freezer over night so it shrinks , the next day i set a heat lamp over the housing for a few hrs. so that bearing expands , then i line up the counter balance mark with crank mark and it just drops right in , no need for a hammer , let it sit a few hrs and blow any moisture out , excellent video very nice work
Good idea, I do this but with bearings mostly.
You should be using a torque wrench to tighten bolts in aluminum holes. Impacts are bad for stripping threads and so is not using the proper torque wrench.
Recently replaced some gears in 420 es, but can not get the gears to shift on the shift check. I feel like things are installed correctly
did you honda bond only the outer edge? or the inner moon shaped edges as well?
Nice video i have problème with my honda rancher 2013 dont shift to 2 to 3 what do u think about the probleme tks to help
How can I find out the crankshaft part number ?
Very nice and informative. This helps me better understand how these work. I purchased a 2008 trx500 Foreman Fourtrax with a manual transmission. All gears work except third. What diagnostic steps can one take to insure it is just the third gear and not something else?...simple? Looks like a tear down and a complete over haul is in my future. Thanks for any guidance and I'm open to any pointers from anyone.
just follow the yellow brick road
Working on these Honda Rancher 420 es is like chasing a rabbit down a rabbit hole
Can you do a Honda Pioneer
This was a Honda Rancher video I can ask about a Honda Pioneer. Where are you located?
Hi . I. Having some problems with my honda fourtrax 420 2010 fm . Wondering if you folks can help ? Thanks
did it run after you put on the bike?
He cambiado planta, CDI, captor de pulsos, bobina y bujía y aún así mi Fourtrax 450 año 2005 no arranca, no hay chispa en bujía, el tablero no da señal que podrá ser
THAT IMPACT , ITS A MIRICALE YOU AINT STRIPPING AND BREAKING JUNK
Hand threaded in then use impact on Ikea setting you won't strip anything bub
the manual does not mention the bushing oil holes. When I took my 420 apart I checked the outside transmission gear bushing and the holes were not inline and this transmission has 750 hours on it and it still looks fine.
i JUST WANT TO KNOW WHY HE IS HITTING THE CRANK WITH A HAMMER WHEN THERE IS A TOOL TO PULL THE CRANK INTO THE BEARING
Good thing its not a hydrostatic transmission...