Just a friendly comment, an intercooler will not play any role in lowering your water temps, intercoolers cool the air down in the intake before it goes into the turbo.
@@ethantyrerf22"blowing the seal" is the plastic failing and the pipe blowing off the throttle body. With heat cycling making the plastic brittle, 2 things typically happen - the MAP sensor blows off the pipe, or more commonly, the throttle body coupling blows apart (yes, right at the seal, but it's not the seal (gasket) that fails - it's the plastic itself). If you're really special, both fail at the same time (like mine did). Potential issue here is that while yes, you're dealing with positive pressure in the pipe itself, you also have negative pressure at the throttle body. Allowing it to blow off risks inhaling any plastic shards blown off in the failure. It usually doesn't happen, but it would be a catastrophic event if it did. It's entirely preventable, guaranteed to happen over time, and imminent if you've increased boost - entirely not worth the risk. Tuning the car while maintaining the plastic charge pipe is a terrible move - straight up. It's a couple hundred bucks and a little time (a total pain in the ass, admittedly). But necessary.
![400HP BMW M235i REVIEW on AUTOBAHN [NO SPEED LIMIT] by AutoTopNL](http://i.ytimg.com/vi/JjTW37Pxi3M/mqdefault.jpg)
Just a friendly comment, an intercooler will not play any role in lowering your water temps, intercoolers cool the air down in the intake before it goes into the turbo.
Hi mate quick question. What's the inlet size on the slip on exhaust tips do you know ? Thinking of the blue ebay akrapovic exhaust tips
i’ll have to check
where did you get the diffuser from?
auto id
What was that gague you had for temps
just one off ebay they are about £60
Same question mate but have you got a quick link for this?
Little slip up “the de….sports cat”
😏😏
Did you do the charge pipe? Pushing 400 bhp without upgrading it, it will surely go bang soon 😅
i’ll replace it with a metal one when it does break
@@ethantyrerf22 risky as plastic could find it's way into the turbo no?
@@ItsCDB they usually blow seals first
@@ethantyrerf22 fair enough might do the same
@@ethantyrerf22"blowing the seal" is the plastic failing and the pipe blowing off the throttle body. With heat cycling making the plastic brittle, 2 things typically happen - the MAP sensor blows off the pipe, or more commonly, the throttle body coupling blows apart (yes, right at the seal, but it's not the seal (gasket) that fails - it's the plastic itself).
If you're really special, both fail at the same time (like mine did).
Potential issue here is that while yes, you're dealing with positive pressure in the pipe itself, you also have negative pressure at the throttle body. Allowing it to blow off risks inhaling any plastic shards blown off in the failure.
It usually doesn't happen, but it would be a catastrophic event if it did. It's entirely preventable, guaranteed to happen over time, and imminent if you've increased boost - entirely not worth the risk. Tuning the car while maintaining the plastic charge pipe is a terrible move - straight up. It's a couple hundred bucks and a little time (a total pain in the ass, admittedly). But necessary.
Trying to hit 500hp on mine
let me know how it goes 🫱🏻🫲🏼
Do you have 100-200 time?
not right now but i’ll be getting some soon
Bro did no supporting mods😭
no need my friend
Yes you do, bootmod3 stage 2 tune paired with intercooler, charge pipe, intake , awe midpipe and catless down pipe .. boom 💥
@@Jrvince235i i’m running mhd
@@ethantyrerf22mhd/bm3 makes no difference. n55 will not touch 400 on stage 1