This was the first car that popped up when I was looking for NA-T IS’ and I thought to myself, this is most beautiful NA-T I’ve ever seen I didn’t think I stumble onto the video breakdown of the build.
This the type of builds that make your chest cave in. That's some impressive stuff. Going to go uz is400 with mine. Next car will definitely be awd...but that's for another day.
Hi Christian, how is your car holding up, I am more interested in the health of your drive shafts, front differential and transfer case, are they holding up with this type of power? Also, have you launched the car with this power? Thanks in advance.
Would be very easy to move this AWD 2j setup to a zf8hp auto trans, which also support transfer case in awd configs. 8 speed w/ 100ms shifts, clutch by wire
Block is different but rwd block can be modified to suit, awd subframe, mounts, steering rack , lower control arm rear mounts welded into chassis and oil pan and oil pump at minimum.
Why is there only rear-wheel drive in the USA from the Lexus is300 supported?? Where did the four-wheel drive go?? Or is it just the Gita? Who fumbles in this topic write:))
The transfer is out of an awd barra powered ford territory, they hold up fine in 2.5 tonne suv with up to 1000hp, tge crown diff is bigger than gtr front diffs. 170mm vs 160mm in a gtr.
@@BlackBeard_ET I'm looking for someone that can make me a custom awd front subframe for a left hand drive supra mk4. Front hubs, front shocks forks, engine mounts, etcs. Hopefully a bolt in kit.
@@vinhtran4886 only way for there to be a “bolt in kit” there has to be a demand for it.. otherwise it’s up to the fabricator to lay it out for you and hoping he got it all correct.
Amazing car glad this came up on my feed! , love the mid range acceleration! Has this car done any roll racing/drag racing/autox? If you had a choice for a smaller turbo what would you pick? There seams to be alot of people going the gtx3582, efr 8374/9180 route - however most of them have manuals. I've been reading compressor maps and found the sxe range to be right in the sweet spot I'm currently getting the parts together for an is300 + s364sxe + built a340 (3200rpm) I'm planning, this has just reaffirmed my choice!
This was the first car that popped up when I was looking for NA-T IS’ and I thought to myself, this is most beautiful NA-T I’ve ever seen I didn’t think I stumble onto the video breakdown of the build.
Props on putting this all together, very impressive.
Was not expecting the turbo 400
1:11 "naturally aspirated" as you see the massive fking turbo
The motor was originally a NA high comp motor.
I've been hunting for info and came across your build photos online. Glad I finally found your video and the explanations. Fantastic job sir.
This the type of builds that make your chest cave in. That's some impressive stuff. Going to go uz is400 with mine. Next car will definitely be awd...but that's for another day.
beautiful car - miss my is300 everyday, was the same colour too
Sickest is300
I seen yet
I just watched Ken Gushi's IS and now this
Damn
What a magnificent build. ❤
I would love to buy an awd is300
Loving the old (though still available new) Autronic
this thing is bonkers. hell yes
wow thats hella awesome and unique!
wow just wow
🔥bro and im going to be making my fd awd once I get another one
Hi Christian, how is your car holding up, I am more interested in the health of your drive shafts, front differential and transfer case, are they holding up with this type of power? Also, have you launched the car with this power? Thanks in advance.
Dope!!!! I wanna do the same thing but with a 6spd 330XI driveline
where can i find the front lip?
Badass! How much to get this build together. She must fly!
Fantastic! 🏁🏁🏁
Amazing Crazy build 10/10.....can't stand that screamer pipe ruins the 2jz engine noise And turbo sound
Would be very easy to move this AWD 2j setup to a zf8hp auto trans, which also support transfer case in awd configs. 8 speed w/ 100ms shifts, clutch by wire
Madman🔥
so in order for this awd conversion to work you have to use a toyota crown subframe and block?
The oil pan and oil pump not the whole block from what I gathered
Block is different but rwd block can be modified to suit, awd subframe, mounts, steering rack , lower control arm rear mounts welded into chassis and oil pan and oil pump at minimum.
Awesome.
What need to make the is 300 AWD REALLY WANNA MAKE MINE
Is that factory motor that comes is the car..I'm building a sc400 v8 motor turbo to go into my is..What you think
Why is there only rear-wheel drive in the USA from the Lexus is300 supported?? Where did the four-wheel drive go?? Or is it just the Gita? Who fumbles in this topic write:))
People) what do you think?) Is it possible to transfer the front gearbox from Toyota Gita to Lexus is300
Any info on that front lip?
where did you get the dashboard cover
Would this work on a Toyota altezza ?
Parts list????
Front wing？
Where do you buy a AWD 2jz motor?
where can i get rear spoiler like that on the is300
WOW
The stupid beauty cover can go, it's hiding that masterpiece 2j
Vvti ge cam covers look like shit, if i had gte cam covers it would be gone.
NOOO WAYYYY!!!! HELLS YESSS!! Check out my turbo built is300
damn near impossible to do this in california smh
wonder what power that x5 trasnfercase and that crown diff hold
The transfer is out of an awd barra powered ford territory, they hold up fine in 2.5 tonne suv with up to 1000hp, tge crown diff is bigger than gtr front diffs. 170mm vs 160mm in a gtr.
damn and he keeped the engine cover
I didnt know the lexus is350 even came 4wd
Would the 2jz awd front sub frame and suspension parts fit in a supra mk4?
Depending on money and how much you want to spend
@@BlackBeard_ET I'm looking for someone that can make me a custom awd front subframe for a left hand drive supra mk4. Front hubs, front shocks forks, engine mounts, etcs. Hopefully a bolt in kit.
@@vinhtran4886 only way for there to be a “bolt in kit” there has to be a demand for it.. otherwise it’s up to the fabricator to lay it out for you and hoping he got it all correct.
What are the wheel offset?
18x8.5+32
Seems a lot of work considering the Altezza Gita/IS300 Sportcross (ie this body shape) came with a 2JZ-GE & AWD from factory...
RWD from factory...
Amazing car glad this came up on my feed! , love the mid range acceleration! Has this car done any roll racing/drag racing/autox?
If you had a choice for a smaller turbo what would you pick?
There seams to be alot of people going the gtx3582, efr 8374/9180 route - however most of them have manuals. I've been reading compressor maps and found the sxe range to be right in the sweet spot
I'm currently getting the parts together for an is300 + s364sxe + built a340 (3200rpm) I'm planning, this has just reaffirmed my choice!
Nathan Cooke if i had to choose a smaller turbo a garrett g35-1050 would be my choice. The s364 is a great budget turbo that will be lots of fun.
@@11jbegita sportcorss could be had with awd
@@bradleyadams5167 Not in Australia.
i like it but $ and a lot of work
Ladies and gentlemen I present to you the real life Sultan Rs
I see this car in town all the time 'pov300'
Had no idea what has actually gone into it
I have been bamboozled
The rs200 should have came 4wd from the factory with the 3sge beams
wrong hand drive
Wth I didnt even realize that's crazy
No its Right hand drive the best side
mexico 😂😂😂
What oil pan?