Testing Badger's New Colored Stynylrez Primers For Gunpla
Вставка
- Опубліковано 11 вер 2024
- Here I test new colors for Badger's awesome Stynylrez plastic primers. I test 8 different colors over 4 of the new primers. Results are positive. If you know of good color combos I should try let me know in the comments below.
Wow. I have never heard of badger's colored primers before watching this video, will have to check out their line up of colors. Thank you for this info, and testing of different colored top coats. Very interesting.
Great review, but I got no-kidding motion sick at the 27 minute mark. Couldn't finish.
Have you done tests with other types of primers? like automotive primers, all purpose primers (from hardware stores) Rustoleum and other paint brand primers?
I customize Transformers, i know they're different as far as the construction/build of a model, but the painting principles are about the same.
I'm thinking of getting into airbrushing, and I have about 3/4 of a quart of a primer I bought, Bulls Eye 1-2-3 (a Rustoleum brand) that sticks great unthinned and applied with a brush, and it's a pretty thick primer, so i was wondering how much can it be thinned before it loses it's bonding properties if applied to with an airbrush
You can probably thin it 50/50 no problem. I'm planning on a big primer test shoot out video at some point
your test is just awesome, useful reference
Thank you 😀
Very impressive. I just ordered grey and black. Really looking forward to getting them. What air pressure do you recommend? I'll be using a Pasche VL or H. # 5 tip.
What the best way to strip a car that has been primed with this primer? Purple power takes the acrylic paint right off, but the primer I have to really scrub to get it off, to start over on a model car
Thanks for the info. In one of the other comments you said you were thinning it 70:30. What are you using to thin it with?
I like those.. :) Vallejos works too, I just let it dry/cure for longer (sometimes a wekk). But recently I have been using Mr Surface 1500.. I use both though as well as Alclads stuff for their shit.
How would I spray stynylrez through an airbrush with a .35 needle? What thinning ratio and psi would be appropriate?
Thanks for the video, very helpful. This is the first primer that I have tried, and it worked out pretty well on my first model. What are you using to clean your airbrush? I struggled getting all the primer cleaned up when I tried.
Watch my video on how to clean Vallejo Air Paints from the airbrush. I use a top secret ingredient 😉
Thanks for that, great video! Hot water, who knew!
Curious as to what the gold you used over the pale pink would be a rose gold effect.
I find that I have to strain these primers or they will clog my airbrush but I love using them .
At one point you said your air pressure might be too high.... what happens when you have too high of air pressure? What happens with too low of air pressure? Sorry I'm new to airbrushing
Too high air pressure and the paint hits the surface dry. Too low and it spits out inconsistent. Just right and it looks wet and even
@@barbatosrex9473 thank you! Definitely appreciate the response
I checked out all of the videos and searched for "primer" and was wondering if there was a primer comparison video by chance? Maybe I over looked it and couldn't find one? I didn't know if a video was put out comparing different air brushed primers versus say spray cans or something like that? Like many others, I'm getting back into modeling from when I was a kid. I don't know a whole lot about paints as in acrylics and lacquers and enamels. Not sure if you can use a acrylic primer then say a enamel paint over it or if you have to keep it within the same kind of paint? Back in the day I used whatever Testors paint I had in a can. Now days I watch videos such as these and am eager to try airbrushing paints instead of using brushes. Sorry for the rambling but if you have a comparison video on different primers could you or someone please post a link or a title that I could search? EDIT: Just read the comments and notice the responses.
I'm working on a primer video test. It's going to take a while cause I'm buying most brands out there and I'll be doing both spray and airbrush types. I'm going to have to make it 2 parts as it would just take tooong for 1 video. Also I have trouble sometimes with enamels lifting off some primers so I started keeping enamels within their own family if you will.
@@barbatosrex9473 Appreciate the info, thank you :)
Today, with over a year of these videos. What psi are you shooting the stylrez black, gray, and white?
20 to 30 psi unless it's sprayed in my Badger 105 Patriot, then it's only 15psi
Interesting primers. Can I shoot lacquers and enamels over this primer? Can it be thinned with Mr. hobby leveling thinner? Thanks bud.
After it fully dries you can spray just about anything over it. I'd test it with enamels as I always have a problem with enamel. With a large needle you can spray it out of the bottle, say a 0.4 or 0.5mm. Anything smaller just dilute it with an Acrylic thinner just a little bit. This stuff is great. I'll be filming another video on them soon
Whats the differece of Badger Stynylrez and ultimate primer?
Not sure but these Stynylrez Primers replaced the Ultimate primers in their line up
How about clear paints on clear parts? Even the clear metallics. No primers or under coats.
Absolutely you can. I will spray some clear spoons and plastic to my next clear paint test coming soon
Hi, I'm very new to this hobby and I was wondering if it's possible to use Alclad gloss black base over these primers.
I believe you can as long as the primer is thoroughly dry. Keep in mind that the Alclad Gloss Black Base is a primer in and of itself. It should cover anything
@@barbatosrex9473 Thank you for taking the time to help me out. Loving this channel.
So when you want to paint yellow... would you rather go with a red primer or the mustard?
It all depends on what your looking for. Over red the yellow appears to be a darker deeper yellow. Over the yellow it would appear more true to the actual yellow color itself.
@@barbatosrex9473 Good to know. I have tried to use white as the base coat. Mixed results.
will primer come off if you scrap with your fingernail? Thanks.
Not these, this is with out a doubt some of the best primers I've ever used and come highly recommended .
Good video! I am planning to purchase this badgers! Any dilution you could recommend or just straight from the battle? How much psi pressure 20-30? Thanks!
Delution depends on the airbrush needle size. With a 04mm or 05mm you shouldn't need to thin it. That being said, I have been thinning them lately. Especially the new gloss black. I would go 70/30 paint to thinner. These primers are awesome. They dry perfectly every time
20 to 30 psi depending on your airbrush. A larger needle would need less psi where as the smaller would need a higher psi
👍👍👍👍
What airbush are you using?
That's an old Testors Aztek airbrush that I've since stopped using because they're no longer made and I don't want to promote a product you no longer can get. I know use a GSI Procon Boy and a Badger 105 Patriot. The Patriot is perfect for these primers and cost well under a hundred dollars. You can get either one here spraygunner.com?aff=10
@@barbatosrex9473 Thanks for the fast reply on an old video! Honestly the trigger version of the procon is looking nice. I'll have to remember the link when it comes time to buy.
@@tristanspahr6164 I have the trigger version too. The whole Procon lineup is awesome
Someone suggested I use this paint to prime the rubber parts of action figures I'm custom painting. Would anyone suggest using this or anything else on rubber.
These Stynylrez Primers might be the best airbrush primers I've ever used. They're great for all types of surfaces and I highly recommend them.
I got them here spraygunner.com?aff=10 they might have the multi packs in stock which is a great way to buy these
@@barbatosrex9473 Thank you your reply, and thanks for creating content and sharing!
Can it be stripped easily?
I haven't tried stripping there off. Have you seen my video on removing paint from models? Onr of those I tested will work for sure
@@barbatosrex9473 yep i have. Sometimes paint goes wrong and having a primer that comes off easy really helpz