Ohhh FFS Martin, I finished sanding my primer yesterday and was going to spray basecoat today, not sure i can do it without watching this in case it's inspirational and changes my plans (new CF ebike frame, self build, going for a super wet look black gloss) So far everythings going great thanks to your videos, thank you.
Great video, love all your content but im guessing this one resonates more with your average painter! Its how i'll be painting my first frame, so to see someone as talented as yourself go back to basics is very helpful
I’m going to take this concept but flip it. I’m going to paint it this way first. Then put my stencil and then a top layer of matte black so my design is this dope color fade but also gloss design with the matte background to really make it pop
Hallo Martin, der Rahmen sieht richtig nice aus :DD wäre es vielleicht möglich dass sie ein genaueres Video zum Thema Spray-Klarlack machen ? Also wie man es richtig auftragen muss, worauf man achten muss usw.
hey there, i have a question. You have an another video with aluminium bike paint job. In that video, you mention that when doing a paint job on aluminium bike, always use 2K Spray Max primer. How come you're using a primer dedicated for plastic materials in this one? Thanks for your cool videos!
I’ve just found your channel and absolutely love it! Thank you. A couple of questions if that’s OK. Are you sanding in between coats of primer / colour / 2K? Or is that not necessary? What temperature is your spray room at? Just thinking about curing times. My garage can be cold! Thanks again Jack
Great video Martin, but a little confusing. I want a gloss black fade into bare aluminium but I think you used to say transparent aluminium primer is not available. Looks like you got a good result from adhesion promoter for plastic. This is what you linked in the description. Shall I try this too?
Hello my friend I wanted to know if required to wash the frame with water after sanding in both stages after sanding the primer and the paint or clean it with paper towel only ?
That looks phenomenal. Questions: 1. The transparent primer you are referencing is a, "Plastic Adhesion Promotor", is this correct?? 2. Is there no need for sanding between primer coat and paint? 3. Is there no sanding between paint and final clear coats?
Great videos. You're truly an artist. Amazing work. I want to paint an aluminum frame and I think I want to fade black with fluro yellow. Which color should I start with? Fade yellow on to black or vice versa? Thanks for your inspiring videos. 💪
Fleisch Peitsche 🤣😂🤣😂 wow! You should have chosen a hot pink / purple candy for this 😜 But this combination is just beautiful! I love it! Mein lieblings Senf! Schöne Grüße aus Berlin!
I probably have 75 bucks in paint primer, clear, & sanding paper to go on My $100 walmart Aluminum cruiser bike. Makes no financial sense, but it was my grandfather's bike. It will be my fancy just around the neighborhood bike
Hello I have a question do I need to wash the frame after every sanding process because to me I think it’s necessary to keep it clean but not sure please answer me
Could you please do a DIY video on how to paint over chrome? I have a bike where the chainstays, bottom bracket and some of the downtube have all been chromed - I would like to paint over them, leaving the driveside chainstay chrome exposed...
I'm about to strip my 18 year old hardtail to paint it. Pretty much like this one, but I'm going to leave it without any branding nor stickers. I'm going with a faded yust like this one but instead of candy yellow I'm going with piano black in the back. I'm still considering weather I want or not to make my branding logos and include them. Maybe some silver for those, so I would be going with a base silver colour, then the decals, then the colour fading, removing the decals and finally a heavy coat of clear coat. I'm rhinking like 3 to 5 layers to give the paint better protection from chipping.
I've watched & re-watched this video so many times, I'm starting to dream in color. I've painted an aluminum hard tail following your instructions & couldn't be happier. To get the same results with a steel frame, would a different primer be required?
Thank you Martin, really detailed video and perfect for me as I am about to paint my steel frame! Do you need to sand down the clear coat for metal frames or this process only apply to carbon frame?
Great Work, like always! ... You motivated me to paint my bike a couple months ago. I'm considering to paint my Alu-Frame with a faded blue/green color. Most of the cans I could found require a glossy finish. But I would like to have it in matt. Can I go for it? I'll make a video u'll hopefully react to :) By the way, could u recommend a spray can for my usage? I'm considering to get the "STI-Design Flip-Flop composite GB"
Thanks. I want to do this. I changed my mind and will return the montana gold and get these paints. is one can of primer, pro red, pro yellow and 2k clear enough? dont i need to paint silver after grey primer? ie - Base Metallic Silver Coarse - Kustom Canz - Urethane basecoat? sorry my costs are balloning just stickers are $50 :( plus parts on my 1996 Rocky Mountain Hammer)
Hi Eto! Nice videos, a question, and if i like to leave the raw aspect aluminium in the frame and wich coat trasparent need for protect the raw aluminium.?🙋🏻♂️ Thanks in advance
Hi, I haven't seen any video paintung on plastic that accepts some flex, i.e.a motorcicle covers or somthing like that. Would be cool to watch gow you would paint ir
Hi Martin, keep the good work, amazing job. I have one question i cant find those colours from spray max, are they anodized or candy? I would like to go top quality so if possible use all products from Spray Max Thanks
Good day all. Question i got my aluminum frame bead blasted. Should i sand it or just prime and paint ?? The frame is thats grey color after besd blasted ?
I hope my comment will be noticed. Can you make a video of rigid fork and rim that will suit at that color of the frame? I am building a bike and i want that color. Thank you.
Hey Martin. I know the video is a little bit older but I was wondering if you still have to use the ammonium degreaser even if you prepared/cleaned your frame with professional media blasting before or is this only important if you sanded the frame on your own? Btw your videos are awesome.
I want to strip an older aluminium frame and then polish it to have a natural finish. After polishing the frame will I still need to degrease it before using a clear primer and then finishing with a 2k clearcoat. I would like to see you do a project like this and am sure many others would be interested as well. Love your work. Thanks in advance for your help.
Moin Sehr gute Arbeit Leider hat mein Bike ein paar leichte Beschädigungen Ist es möglich zuerst zu Grundieren und dann z.b Chrome Lack zu nutzen ? Welche Grundierung unter dem Chrome ?
Hi man! great tutorials and vids, im about to go full on on a bike repaint and happened to have found a couple of you're video thats really helped setting things up. i need a pair of infos though, my frame is aluminum ( painted). so i'll have to strip it down first , (probably fine-sand blasting if i find someone near where a live). is the 2k primer that you've used in another video a better choice even for aluminum? i don't want any "exposed alu" part so i guessed it's more strong? also, any chance you can get me the ebay store link that set you up with the " supermeme" decals? i'm from italy and i can only find my original model in Australia and shipping is like 3x the cost of the item!! thanks ! keep it up!
Guten Tag dir. Ich habe eine technische Frage. Der 2K-Klarlack löst die 1K-Lacke darunter nicht an? Ich habe vor einen alten slurshnen zu lackieren und über der primärfarbe (1K) mit Metalliclack (1K) eine dünne farbschicht aufzunebeln. Besteht dann die Gefahr, dass mir der Klarlack den vorher aufgesprühten Lack löst?
Hi Martin, In manchen Videos schleifst Du die Rahmen zwischen Grundierung und Farblack sowie zwischen Farblack und Klarlack. Wieso hast du das hier nicht gemacht? Und würdest du diese Schritte bei einem Stahlrahmen machen? Liebe Grüße
Nein auf keinen Fall das würde ich nur bei einem Holzrahmen machen. Hatte diesmal keine Lust. Viele sind ja extrem faul und ich wollte auch mal ein Video für die faulen machen.
@@ETOE Haha sehr gut! Also nochmals zum Verständnis: Am besten zwischen den verschiedenen Lackschichten mit einer 800er Körnung nass anschleifen, oder? Mach weiter so coole Videos. LG
Interesting. The link you have for the US for primer is plastic adhesion promoter, which I thought was only for plastics. I thought for aluminum you needed either self-etching primer or a DTM epoxy primer. Can you explain?
Never mind. 🙂 I found your Q&A videos and you answered this question directly in one of those. You recommend the exact epoxy primer I have in my Amazon cart! 😆 Thank you so much for creating this channel. I love watching your creations, and you have great info for helping us know how to paint our bike frames. I'll be able to take my 15 year old bike with chipped paint covered by nail polish, and make it look brand new again!
2:09 + 2:13 ...the "bloop, nice" Meme is missing XD 10:56 Bautzner4Life ...i eat it with everything and its one thing from east germany which i will never miss Bautzner = Like + Abo
@@ETOE and here thought I was giving you a mental breakdown. ... I watched most of your videos, martin. They are all splendid and anyone with half a brain checks the video description on their own ;)
Hello Martin! Beautiful job. I need some help. My bike its a alluminium frame and i want to change de color. First step, i have to remove the original color, what do you recomend to me, remove with a paste remover or by sanding? Second step, after i remove the original paint, what water sand do you recomend to sand to aplly the primer? And what water sand to sand the primer? Third step, the main color, will be yellow, but some details a want be to in black. For the result i want, i have to paint some parts in black, paste the stickers and after paint all the frame by yellow? Or to dont have color difference, i have to paint all the frame with the color of the stickers and after paint all the frame with the final color?
Forks are interesting, the lowers are magnesium so you can't just strip them then use a regular primer. I paint lowers all the time and just scuff the current finish then prime and go from there
According to you´r links, you used a plastic primer, is that right? I´m having trouble with my primer and are trying to find a working one. Tried Montana aluminium primer, but it did not work right, and then an etching primer, but it did not etch...
Do you recommend doing all paint layers including base coat in 1 session? Or can I let my primer layers fully cure first and start with colours + clear later?
Can you do a video on how to make decals at home without the cutting Machine?
Please watch this video: ua-cam.com/video/267FylUhcu8/v-deo.html
This video is the most detailed you've given so far in regards to painting with spray cans. Thank you for sharing Marin. And God Bless!
No way, that frame is the exact same as one I have for a project bike. It's the entire reason I'm watching this video. Perfect
Rose the Bruce Frame ✌️
wenn du es lackieren möchtest ist das Video 2 in 1 😂🎉
I love watching people who loves their jobs.
Ohhh FFS Martin, I finished sanding my primer yesterday and was going to spray basecoat today, not sure i can do it without watching this in case it's inspirational and changes my plans (new CF ebike frame, self build, going for a super wet look black gloss) So far everythings going great thanks to your videos, thank you.
And a question if you don't mind, can Cerokote (mc160 ceramic clear) be laid over normal 2k clear?
I love your sincerity, and probably the most detailed DIY bike spraying process i've seen till date.
OO Awesome Sea Shepherd Banner!!
Your videos helps me a lot in finishing my first bike frame repaint using spray paints. All of your works are awesome!
Gorgeous paint job! I'll be taking on my first paint project this weekend... Thanks for the tips!
You are welcome.
Definitely know what's on my agenda tomorrow. Looks sweet and cant wait to watch
You are so entertaining and I love to watch all of your videos ♥
Love from Philippines 🇵🇭
Thanks a lot.
Definitivamente eres el mejor!!! Saludos desde México
Extra thick meat whip? Are you subliminally advertising your German death metal band?? Haha! Love it!
FLEISCH PEITSCHE mit Bautzner Senf ;-). Einfach phenomenal! Sehr geiles Video!
This weeeeeediiiiooooooooo 🤣 keep up the great videos man
Lol, great sense of humour man, and amazing work as always.
Great video, love all your content but im guessing this one resonates more with your average painter! Its how i'll be painting my first frame, so to see someone as talented as yourself go back to basics is very helpful
I’m going to take this concept but flip it. I’m going to paint it this way first. Then put my stencil and then a top layer of matte black so my design is this dope color fade but also gloss design with the matte background to really make it pop
Been following ever since i first saw you painting and sooner ill try also to repaint my own bike frame.im from Philippines
He makes it look so easy!
One the most entertaining and informative videos I've seen in a long time, subscribed..
Just did my DIY this wk turned out good for a first timer thanks and Godbless
Hallo Martin, der Rahmen sieht richtig nice aus :DD wäre es vielleicht möglich dass sie ein genaueres Video zum Thema Spray-Klarlack machen ? Also wie man es richtig auftragen muss, worauf man achten muss usw.
hey there, i have a question. You have an another video with aluminium bike paint job. In that video, you mention that when doing a paint job on aluminium bike, always use 2K Spray Max primer. How come you're using a primer dedicated for plastic materials in this one? Thanks for your cool videos!
Thank you. You paint job is amazing.
Thank you! Cheers!
Deine Videos sind einfach spitze !
Meat whip, extra thick. Best design ever :D
that frame turned out great
Thank you.
Super paint job bro
This is perfect I will come tomorrow to watch bro
❤️
I’ve just found your channel and absolutely love it! Thank you. A couple of questions if that’s OK.
Are you sanding in between coats of primer / colour / 2K? Or is that not necessary?
What temperature is your spray room at? Just thinking about curing times. My garage can be cold!
Thanks again
Jack
Great video Martin, but a little confusing. I want a gloss black fade into bare aluminium but I think you used to say transparent aluminium primer is not available. Looks like you got a good result from adhesion promoter for plastic. This is what you linked in the description. Shall I try this too?
Only if you degrease the frame like I did.
@@ETOE What was the bare aluminum frame sanded to for grit? Should I polish the frame or go with 1000-2000 grit before the adhesion promoter?
@@ETOE will the primer for plastic also work for the galvanized steel (faux chrome aka zinc I guess)?
Hello my friend
I wanted to know if required to wash the frame with water after sanding in both stages after sanding the primer and the paint or clean it with paper towel only ?
Master of masters.
That looks phenomenal. Questions: 1. The transparent primer you are referencing is a, "Plastic Adhesion Promotor", is this correct?? 2. Is there no need for sanding between primer coat and paint? 3. Is there no sanding between paint and final clear coats?
What font did you use? I can't find that information in the description ;-) I do love the "flesh whip"
Great videos. You're truly an artist. Amazing work. I want to paint an aluminum frame and I think I want to fade black with fluro yellow. Which color should I start with? Fade yellow on to black or vice versa? Thanks for your inspiring videos. 💪
With yellow.
hilarious as usual 😁 nice one, love the enthusiasm
Glad you enjoyed
Fleisch Peitsche 🤣😂🤣😂 wow! You should have chosen a hot pink / purple candy for this 😜 But this combination is just beautiful! I love it!
Mein lieblings Senf!
Schöne Grüße aus Berlin!
Servus Martin, Weltklasse Video....kurze Frage, muss ich einen Stahlrahmen auf die selbe Weise vorbehandeln? Besten Dank für Info und deine Videos!
Das einzige was du musst ist atmen, essen, trinken, scheißen und sterben. Den Rest kannst du dir aussuchen.
I probably have 75 bucks in paint primer, clear, & sanding paper to go on My $100 walmart Aluminum cruiser bike.
Makes no financial sense, but it was my grandfather's bike. It will be my fancy just around the neighborhood bike
Hello I have a question do I need to wash the frame after every sanding process because to me I think it’s necessary to keep it clean but not sure please answer me
Thanks Martin! Could we get a few more can flips in the next video? But seriously your videos rock fella!
I will try.
🚵♂️👍🙂
Nächstes bike
Unterrohr : CAMEL TOEs....
Oberrohr : I do pedicures on...
Could you please do a DIY video on how to paint over chrome? I have a bike where the chainstays, bottom bracket and some of the downtube have all been chromed - I would like to paint over them, leaving the driveside chainstay chrome exposed...
I'm about to strip my 18 year old hardtail to paint it. Pretty much like this one, but I'm going to leave it without any branding nor stickers. I'm going with a faded yust like this one but instead of candy yellow I'm going with piano black in the back. I'm still considering weather I want or not to make my branding logos and include them. Maybe some silver for those, so I would be going with a base silver colour, then the decals, then the colour fading, removing the decals and finally a heavy coat of clear coat. I'm rhinking like 3 to 5 layers to give the paint better protection from chipping.
I've watched & re-watched this video so many times, I'm starting to dream in color. I've painted an aluminum hard tail following your instructions & couldn't be happier. To get the same results with a steel frame, would a different primer be required?
Idont think these candy colours can be used on steel frames because you wouldnt get the shine through you get from spraying directly on to alluminum.
Could you do motorbike fairings? That would be awesome to watch in the way you make videos
Maybe in twenty years when I have enough money to afford them.
I love your craic, from one artist to another watching you work makes my day. QQ though any top tips for stripping the frame? Aluminium that is
What is the best way to remove the previous paint job on an aluminum frame? Paint stripper? Sanding? Wire wheel brush?
Thank you Martin, really detailed video and perfect for me as I am about to paint my steel frame!
Do you need to sand down the clear coat for metal frames or this process only apply to carbon frame?
I don`t need to sand clear.
@@ETOE so just sand primer? And base coat if applying one?
If you like mustard, try Altenburger in "scharf" version. My all time favourite.
Cheers from thuringia.
Great Work, like always! ... You motivated me to paint my bike a couple months ago. I'm considering to paint my Alu-Frame with a faded blue/green color. Most of the cans I could found require a glossy finish. But I would like to have it in matt. Can I go for it?
I'll make a video u'll hopefully react to :)
By the way, could u recommend a spray can for my usage? I'm considering to get the "STI-Design Flip-Flop composite GB"
Thanks. I want to do this. I changed my mind and will return the montana gold and get these paints. is one can of primer, pro red, pro yellow and 2k clear enough? dont i need to paint silver after grey primer? ie - Base Metallic Silver Coarse - Kustom Canz - Urethane basecoat? sorry my costs are balloning just stickers are $50 :( plus parts on my 1996 Rocky Mountain Hammer)
Hi Eto! Nice videos, a question, and if i like to leave the raw aspect aluminium in the frame and wich coat trasparent need for protect the raw aluminium.?🙋🏻♂️
Thanks in advance
"Fleisch Peitsche" that is fucking hilarious! lol
Hi, I haven't seen any video paintung on plastic that accepts some flex, i.e.a motorcicle covers or somthing like that. Would be cool to watch gow you would paint ir
Luv your videos because of your energy or is it the paint fuem...
How about a video on prep and paint suspension forks? Crown and lowers.
Am Wochenende wird lackiert
Das Reinigen direkt vor dem lackieren nochmals mit dem mipa oder normalen Entfetter ?
Hello, can i use lacquer thinner to use as a degreaser before spray painting my aluminum frame?
Hi Martin, keep the good work, amazing job.
I have one question i cant find those colours from spray max, are they anodized or candy? I would like to go top quality so if possible use all products from Spray Max
Thanks
They are candy and not officially available.
Can you do a quick video on all the stuff I need to do this myself? Thanks!! 😉
Good day all. Question i got my aluminum frame bead blasted. Should i sand it or just prime and paint ?? The frame is thats grey color after besd blasted ?
Thank you for this video. Can you make a video on fixing chipped paint job on aluminum frame? In your skill we trust.
Please watch this video: ua-cam.com/video/fkJhFu3wEVk/v-deo.html
Or watch this video: ua-cam.com/video/oUFiP3uosUU/v-deo.html
I hope my comment will be noticed. Can you make a video of rigid fork and rim that will suit at that color of the frame? I am building a bike and i want that color. Thank you.
Hey Martin. I know the video is a little bit older but I was wondering if you still have to use the ammonium degreaser even if you prepared/cleaned your frame with professional media blasting before or is this only important if you sanded the frame on your own?
Btw your videos are awesome.
ALWAYS degrease before primer, it won't be clean even after blasting. It's a must if you want to do everything good.
I want to strip an older aluminium frame and then polish it to have a natural finish. After polishing the frame will I still need to degrease it before using a clear primer and then finishing with a 2k clearcoat. I would like to see you do a project like this and am sure many others would be interested as well. Love your work.
Thanks in advance for your help.
Yes I will do it! Maybe in one or two years when I have the money for the material I need to do it. Currently is no money left to finance the project.
Moin
Sehr gute Arbeit
Leider hat mein Bike ein paar leichte Beschädigungen
Ist es möglich zuerst zu Grundieren und dann z.b Chrome Lack zu nutzen ?
Welche Grundierung unter dem Chrome ?
Für Chrome muss vorab beflammt werden und spezielle Chromlack Grundierung verwendet werden, die es zum jeweiligen Chromlack dazu gibt.
Спасибо Мартин. Теперь я понял как подготовить и покрасить алюминий, чтобы была видна его текстура под лаком !!! Супер
Brilliant videos Martin, do you ever get any glue residue on the frame after you remove the vinyl stencil?
The only sticky residue I can find is the one on toilet paper. But that`s not a topic I like to talk about.
Hi man! great tutorials and vids, im about to go full on on a bike repaint and happened to have found a couple of you're video thats really helped setting things up. i need a pair of infos though, my frame is aluminum ( painted). so i'll have to strip it down first , (probably fine-sand blasting if i find someone near where a live). is the 2k primer that you've used in another video a better choice even for aluminum? i don't want any "exposed alu" part so i guessed it's more strong? also, any chance you can get me the ebay store link that set you up with the " supermeme" decals? i'm from italy and i can only find my original model in Australia and shipping is like 3x the cost of the item!! thanks ! keep it up!
Guten Tag dir.
Ich habe eine technische Frage. Der 2K-Klarlack löst die 1K-Lacke darunter nicht an?
Ich habe vor einen alten slurshnen zu lackieren und über der primärfarbe (1K) mit Metalliclack (1K) eine dünne farbschicht aufzunebeln. Besteht dann die Gefahr, dass mir der Klarlack den vorher aufgesprühten Lack löst?
Ja und nein, je machdem welche 1K und 2K Lacke du nimmst und wie du die Verarbeitung machst.
Id like to see you do a paint job that uses candy colors as you've done but tape the bike like they do pool cue inlays, multiple inlays.
Just watch this video for the multiple color effect: ua-cam.com/video/YaGwTyIPYlg/v-deo.html
Hi Martin,
In manchen Videos schleifst Du die Rahmen zwischen Grundierung und Farblack sowie zwischen Farblack und Klarlack.
Wieso hast du das hier nicht gemacht?
Und würdest du diese Schritte bei einem Stahlrahmen machen?
Liebe Grüße
Nein auf keinen Fall das würde ich nur bei einem Holzrahmen machen. Hatte diesmal keine Lust. Viele sind ja extrem faul und ich wollte auch mal ein Video für die faulen machen.
@@ETOE Haha sehr gut!
Also nochmals zum Verständnis:
Am besten zwischen den verschiedenen Lackschichten mit einer 800er Körnung nass anschleifen, oder?
Mach weiter so coole Videos.
LG
Interesting. The link you have for the US for primer is plastic adhesion promoter, which I thought was only for plastics. I thought for aluminum you needed either self-etching primer or a DTM epoxy primer. Can you explain?
Never mind. 🙂 I found your Q&A videos and you answered this question directly in one of those. You recommend the exact epoxy primer I have in my Amazon cart! 😆 Thank you so much for creating this channel. I love watching your creations, and you have great info for helping us know how to paint our bike frames. I'll be able to take my 15 year old bike with chipped paint covered by nail polish, and make it look brand new again!
Can I use this product for the first layer bonding? Spraymax 1k plastic adhesion promoter
2:09 + 2:13 ...the "bloop, nice" Meme is missing XD
10:56 Bautzner4Life ...i eat it with everything and its one thing from east germany which i will never miss
Bautzner = Like + Abo
Hi Martin. Have you done a brushed aluminium piece with DIY spray cans. Would love to see that.
can i use spraymax 2k wash primer on an aluminium frame, or is it the wrong product?
I would love to try this! Can you please share what Materials you used and where to get them?
Maybe you should watch this video!
@@ETOE and here thought I was giving you a mental breakdown.
... I watched most of your videos, martin. They are all splendid and anyone with half a brain checks the video description on their own ;)
Could you do a customised paint job redbull rampage edition SCOTT GAMBLER 30 FRAME
no sanding between coats? Because it's Alu or because it spray cans?
Does ammonia have to be 29% , would 25-28% work ?
@ETOE Hi Martin. Would you have any recommendation on primer when (DIY) painting a steel frame over a 2k primer or an etch primer? cheers
If I use that adhesion booster, I guess I’ll be able to clearcoat bare aluminum,,, great, it’s not only my frames, but also many random components 😁
"I will dip my weiner into some German Mustard..." hahahahahahahaha
Hello Martin! Beautiful job. I need some help. My bike its a alluminium frame and i want to change de color. First step, i have to remove the original color, what do you recomend to me, remove with a paste remover or by sanding? Second step, after i remove the original paint, what water sand do you recomend to sand to aplly the primer? And what water sand to sand the primer? Third step, the main color, will be yellow, but some details a want be to in black. For the result i want, i have to paint some parts in black, paste the stickers and after paint all the frame by yellow? Or to dont have color difference, i have to paint all the frame with the color of the stickers and after paint all the frame with the final color?
Sanding by hand will take forever, if it's an aluminum frame you can get it stipped chemically for below 50 Euros / Dollars.
Can you do a video going over painting bike forks like the fox 40 or basically any other mtb for lower.
Forks are interesting, the lowers are magnesium so you can't just strip them then use a regular primer. I paint lowers all the time and just scuff the current finish then prime and go from there
1:17 Thank you for speaking slowly. I am mentally challenged. I wish you would do the whole video talking at that speed.
Hi Martin, why didn't you sand between or after the clear coats? As I recall, in previous videos, you sanded between clear coats. Thanks in advance.
No need for sanding cause I`m not on the beach today.
what's your recommended way for removing paint from an aluminum bike frame?
Mediablasting like in this video ua-cam.com/video/I76gWBVBTgM/v-deo.html
Can you do a candy spray can video on steel frame? Love your videos!
Great job. What is the primer you used here? The links in the description is not the same can in the video. Thanks
plastic primer same stuff like in the description but other brand.
@ETOE thanks, is plastic primer the best for aluminium. Montana makes primer for aluminium and plastic, so what would be better for aluminium frame?
Ha ha. Glad i found your channel. Nice!
No need to wet sand anything?
Back again, yeah 👍👍👍👍!
Fleisch Peitsche extra DICK, ich kann nicht mehr😂😂😂😂. Zu Geil
What brand of frame is that... I love the outcome..wanna do it on my project bike too
Rose
According to you´r links, you used a plastic primer, is that right? I´m having trouble with my primer and are trying to find a working one. Tried Montana aluminium primer, but it did not work right, and then an etching primer, but it did not etch...
Yes I used a plastic primer as shown in the video.
Any advise on preparing a shop finished bike for custom paint job?...gruss...alan
Yes check out this video: ua-cam.com/video/IiqWy-JXB74/v-deo.html
This guy is shot....hahahahaha...you make me laugh...Great video as usual.
Do you recommend doing all paint layers including base coat in 1 session? Or can I let my primer layers fully cure first and start with colours + clear later?
Yes I do it in one session.