Jumper T-Lite V2 | Hands Down the Best Value in FPV Radios
Вставка
- Опубліковано 29 сер 2024
- The Jumper T-Lite is my daily driver, and for good reason. It’s small with an ergonomic design, features Hall gimbals, and at the time, was really inexpensive. Since that time many manufacturers have made radios with similar design and specifications. Well, Jumper is back with a version 2 of their T-Lite radio. So let's take a closer look at this radio, and see if these small changes make a BIG difference. For more info check out: bit.ly/3OFzxUX
If you got help, information, or entertainment from this video, please consider sending us a Super Thanks or just hit the "LIKE" button. This directly supports the channel, and allows us to create even more amazing content.
Buy the T-Lite Here(10%coupon): bit.ly/3bUXiec
Buy the T-Lite Here: amzn.to/3c0yUI1
Buy the Jumper T-Pro Here: amzn.to/3oAq9r6
ELRS Nano Module: bit.ly/32Rjod9
ELRS Micro Module: bit.ly/3ghlTIF
ELRS RX: bit.ly/3IWc6nD
Crossfire Nano Module: amzn.to/3gmic4k
Crossfire Retro Kit/Case: amzn.to/3ufHtFL
Crossfire Receivers: amzn.to/3rjtdK2
Buy Sony VTC5 Here: bit.ly/3t1YK4d
Buy Sony VTC5 Here: bit.ly/379JCsX
Buy Sony VTC6 4S Here: bit.ly/3pRg0qX
Buy 18650 Battery Charger: bit.ly/3vTB6sx
EastShine S4 Charger: amzn.to/3pWOcS2
EastShine S2 Charger: amzn.to/3CywjOl
* All links are affiliated unless otherwise stated, and helps support the channel at no cost to you. Thanks
RELATED VIDEOS:
T-Lite Differences V1 vs V2: • Jumper T-Lite Comparis...
Jumper T-Lite: • Jumper T-Lite Review |...
Lite Radio3 w/ CRSF: • I Flew Crossfire on th...
LiteRadio3 Setup & Flight: • BETAFPV LiteRadio 3 | ...
LiteRadio 3 1st-Impression: • BETAFPV LiteRadio 3 | ...
Lite Radio 2SE Setup & Flight: • BETAFPV Lite Radio2 SE...
Lite Radio 2SE 1st Impression: • BETAFPV Lite Radio 2 S...
Radio Lite 2 SE w/ELRS Pt2: • BETAFPV Lite Radio2 SE...
ELRS FULL Setup Pt1: • ELRS FULL Setup and Co...
What is ExpressLRS: • What Exactly Is ELRS -...
ELRS TX Nano Module: • BETAFPV ELRS Nano Modu...
Radio Lite2 SE w/ELRS Pt1: • BETAFPV Lite Radio 2 S...
BabyHawk II 1st Flight: • EMAX BabyHawk II Analo...
BabyHawk II Unbox/1st Impression: • EMAX BabyHawk II ANALO...
BabyHawk II Setup: • EMAX BabyHawk II Analo...
X-Knight35 Unbox: • BETAFPV X-Knight35 | S...
X-Knight35 Setup: • BETAFPV X-Knight35 | S...
X-Knight35 1st Flight: • X-Knight35 1st Flight ...
Beta FPV Pavo30 Unboxing: • BETAFPV Pavo30 | All t...
Beta FPV Pavo30 Full Specs: • BETAFPV Pavo30 Full Sp...
Beta FPV Pavo30 1st Flight: • BETAFPV Pavo30 | Setup...
GEPRC Smart 35 Unbox & Impressions: • GEPRC Smart35 | A 3.5”...
GEPRC Samrt35 1st Flight Pt. 2: • GEPRC Smart35 1st Flig...
GEPRC Smart35 1st Flight Pt.1: • GEPRC Smart35 | FULL S...
Baby Nazgul Unbox & 1st Impression: • iFlight Baby Nazgul | ...
Baby Nazgul Setup & 1st Flight Pt1: • iFlight Baby Nazgul | ...
GEPRC TinyGo 1st Flight Pt2: • GEPRC TinyGO Setup & 1...
GEPRC TinyGo Unboxing: • GEPRC Tiny GO 4K Unbox...
GEPRC TinyGO Full Specs: • GEPRC TinyGO FULL Spec...
GEPRC TinyGO Setup & 1st Flight Pt.1: • GEPRC TinyGO Setup & 1...
TinyGO - 5 Things to Like & Dislike: • GEPRC TinyGO | 5 Thing...
DJI Spark: • DJI Spark Review - All...
DJI Spark Accessories: • Must Have DJI Spark Ac...
#jumperRC #elrs #fpv
![☀ Маленький джампер для новичков - мог бы быть лучшим, но... + Iflight Protek35 [Jumper T-Lite]](http://i.ytimg.com/vi/WqZRrV-WByc/mqdefault.jpg)
![☀ Маленький джампер для новичков - мог бы быть лучшим, но... + Iflight Protek35 [Jumper T-Lite]](/img/tr.png)
Great review! I was so nervous when you were deciding whether to fly that open-prop one around in your room…
I think this radio is a fantastic value. At $60 it’s the cheapest good radio with ELRS, and honestly I don’t think higher end options like the Zorro are worth the added expense.
I agree..I was sold on the original T-lite. V2 makes it even better, but I feel like the Zorros and Commando 8s of the world has a place in a higher segment of the market(granted the T-lite does all the features as well).
One of the best reviews bro. Just bought one.
Glad I could help
Great review dude! I wasn't sure if to buy it or not, but right after watching this video i went ahead and bought the t-lite v2. Thanks man !!
Thanks Alaa, I appreciate that. It's a good radio for the price.
Used this V2 version for a while now with the ELRS module on the back. Solid intermediate level remote! Haven’t felt the need to upgrade.
Will say one of the solder joints on my gimbal broke off but it’s an easy fix. May have knocked it loose at one point. Nice review!
Thanks..I still use the V2 as my daily driver, and it's going strong to this day. Thanks for the feedback.
Thanks for another informative video! I just bought one, getting into fpv with hdzero once the new goggles come out, likely starting with a tiny whoop, so getting a head start with a simulator in the mean time 👍
You're welcome.. Both the T-lite and HDZero are good options.
I think this radio beats all other radios below $100,00 mainly because it has hall sensor gimbals! That is a big plus compared to the other ones. I just wished they could put the lanyard thing there. BTW, it was very funny your face when you smashed the roof with the drone 🤣😆 I did that many times at home too, almost broke my tv once 🤣
Haha.. yeah, I saw my face and thought about editing it out, but nahh 😆 🤣.
You're right about the bang for buck of this radio. It's a really good price point for its feature set.
@One Man Unmanned For the content! 😄 🤣
As a tx16s owner, I like the tx12 as a backup or lighter travel second tx. It is about the same size as a Zorro with the extended battery attachment. I like it because of the screen placement, the battery life and the Jr module bay, so my modules are interchangeable with the tx16s. And the tx12 v2 comes with built in 250mw ELRS and hall sensor gimbals at just below $100. Should be good for pinchers too.
@@kurtzFPV Yes. The new TX12 now with ELRS edition might be a really good option below $100,00 indeed. But the T-Lite it's $69,00 I think.
@@erikvf7 $69 is a really good price for sure. Especially if you like the game style controllers.
Nice work Thomas!
Thanks Darren!
Great Video my dude. You hit the spot. Cheers 🙂
Thanks, I appreciate that! 🙏
No lanyard hook point? Incredibly bizarre
Great review of this lil bad boy 👍🤝
Yeah, kind of an oversight, but I guess they're using the same shell as the V1, which didn't have a hook either.
Thanks!
@@OneManUnmanned 🤗👍🤜🏻🤛🏻😎
Maybe we could use the two holes on top to attach something that a lanyard could hook onto. Not ideal but better than nothing
True..
Just got the zorro but I feel it's a bit too big in the hands to hold comfortably for a long time, even though I have pretty large hands.. I really loved the formfactor of the betafpv literadio but the gimbals were trash and gave me jitter 1 month in.
That's exactly the segment where this radio fits..You explained it perfectly.
Hi, like your review. Do you think it's possible to bind the toy drone using this transmitter. If so, would like to see a video on how to do it. Millions thanks.
I think it would all depend on the protocol of the toy drone.
Hello: If iam right it is a 16 channel transmitter ?!. I asked myself how the 16 control channels are assigned too the physical controls ?. It seems that there are two little controls for all of the 16 channels . 4 Channels are assigned two the 4 axis of the contro switch and 4 channels two the 4 switches = 8 Chnnels at all. How two deal with the remaining 16 channels ?
In case of a misunderstanding from myside, please explain. Thnanks in advance
I am having trouble binding my jumper t lite to a spektrum ar631. The motor will not run. Do you have any advice?
Thank you for this review, but wondering if this transmitter it’s Multiprotol??
Sorry for the late reply EJ.. They do offer this radio both as a multi protocol and as an ELRS version.
@@OneManUnmanned okay excellent thank you for getting back it help me out your answer 👍🏻👍🏻
My T-lite V2 did not come with an SD card. It does not even have an SD card reader. I disassembled the device to search for any internal SD card slot, but could not find one.
The SD Card slot would be on the top near the antenna.
@@OneManUnmanned No, I disassembled the whole remote. The plastic case has a slot under the antenna, but the PCB behind that slot does not have an SD card holder on it. I can send you photos if you want. The PCB does not have an SD card slot.
I have alot of spi whoops and wondering what firmware this has? I am hearing 3.0+ and wondering if that is true can you go to elrs 2.0.0 to work with my spi receivers? Thanks for this awesome review. I have a T16s but need something to just throw in the bag and go when in a hurry to get some packs in.
can you suggest any free simulator that is compatible for this transmitter? tnx
I have the v1 so woukd it be better just to get the elrs module to put on it or better just to buy the v2 and just have 2 transmitters?
It's up to you, but I was in your situation. If your V1 is working well, you could just buy a module and have the best of both worlds. The only downside to the V1 is that it doesn't have a robust power supply system, and anything over 200mw might put a strain on the entire system. I personally prefer my v2. I run stock power with the internal module for Tinywhoops and use the external bay at higher power for larger and long range drones.
@@OneManUnmanned there is a lot of technology and can get overwhelm. Thought about going digital but cost to much at this moment.
Thanks. Which one do you recommend to a beginner? Jumper T-Lite V2 or TX12 mark II? I want to start with a simulator.
It really depends on your preference for size. They both operate pretty well. The TX 12 will have more features and upgrades available, like aluminum gimbals or full sized module bay.
I cant seem to find that specific git pull request and i have the most up to date elrs configurator, am I missing something?
The ELRS configurator has been updated recently with official 3.0 firmware for all radios, including the T-Lite target.
is this better than the betafpv literedio 3 pro?
Yes, slightly better.
@@OneManUnmanned thanks for the info!:D
Hello, I really appreciate your reviews very broken down. I had an issue with get pull requests and it doesn't automatically give me T-lite elrs option and it is not in the dropdown, any recommendations? Im literally trying to bind the Jumper Tlite V2 and the Pavo 25. So this video is exactly what Ive been looking for. Thank you
Everything I did in the video is exactly how I got it to bind with the radio. I start explaining it at 14:30. If you follow those steps, you should find the T-lite in there.
16:41 shows specifically how I got the target. I hope this process works for you.
@@OneManUnmanned Hi! Didn't find it too ¿Are you sure you did not forget to mention something? Transmitter is not connected to the computer so it recognizes the model automatically or something? thank you!
Nope... That's exactly how I flashed my radio. I recorded the video, as I was doing it for the 1st time. I'm sorry you can't find it.
●UPDATE - UPDATE●
The ELRS configurator has been updated recently with official 3.0 firmware for all radios, including the T-Lite target.
Not sure if this is a dumb question, but if ELRS is built in to this radio, why would you mount an external ELRS on this?
It's a valid question.. The internal module is capable of only 100mw. If you want further range you'll need to use the external module and bay.
@@OneManUnmanned cool, so all i need is this radio controller and an ELRS receiver module on my drone and I'm set?
And then I can always upgrade if I feel the need for longer range?
What you said is all correct and a perfect plan.
Can I use my T-lite V1 with ELRS drones? Is it possible to make this radio ELRS compatible or do I have to go buy a new radio? Thanks!
It will work with ELRS drones as long a you buy and attach a Nano TX module to the back.
@@OneManUnmanned Thanks brotha
I have that control, after the simulator what drone would you recommend, that also easily connect to this control?
If you have this radio, any drone that has an ELRS receiver will work. The determining factor on the drone will be your VTX(analong or digital). The Mobula6, Crux35, Smart35, Cinebot 30, and Nazgul5 are all good starter drones.
@@OneManUnmanned Great to here, even without flashing it? Sry for the questions, I'm new to the hobby.
I have an R9 module and an X9D+, which I'm looking to trash. Do you thing version 1 would suite my needs since it has the bay?
The V1 works, and I’m sure you can find them used for cheap, but I would recommend the V2. I still use the V1 and run ELRS at 250mW, but I’m sure it’s straining the electrical system. At 100mW, I’ve never had an issue. If you find a deal on a V1 that you can’t refuse, then it might be worth picking up.
@@OneManUnmanned Thanks! With the R9 915Mhz, I need no more than 25Mw, at best!
Anytime!
I'd buy one, but it just looks stupid.
Maybe appeals to those who like holding a pair of truck nuts.
Teeny tiny screen, no reverse polarity protection and no JR bay means... it's a real
What display can you mount on it? Can’t find anything that would fit (newby here btw :) )
This is the one I see advertised for it. You’ll Need to attach a mount for it.
bit.ly/3Dt5tcM
@@OneManUnmanned thanks a million!
What program are you using to flash the tx?
ELRS Configurator
Will a button top 18650 work?
I have not tried, or have a button top to try. It might be a tight fit.
Hallo. Can i used this with my tinygo
Only after you have changed the receiver in the TinyGo. I have done a video showing how to do that.
Installing ELRS on TinyGo Pt1: ua-cam.com/video/331o5lmtlvM/v-deo.html
Flying the TinyGo on ELRS: ua-cam.com/video/Jy7iiRiw3EY/v-deo.html
OK. Thank you. I Love your Videos. Have you also the Drone dji avata? I wont to youse the Controller with avata
Last I saw ELRS 3.0 was pre release or RC1.
True.. but it ships with it. If you can bind the old fashion way, might be worth keeping it.
Anybody else want to do a "Jesus" and reach through the screen and nail those Italian-talkin' hands to a lump of wood?! 🤔😉
Haha..just you. Many people use their hands to communicate and show emphasis.
@@OneManUnmanned Ah well. Buongiorno Signor Othello.😉
Can i use it for rc plane sir?
Maybe, but most pilots flying planes prefer radios with physical trim buttons.
never fly fpv drones inside. never. really a dumb idea.