Awesome stuff!!! Why is this only 6 minutes? We need a more in depth presentation of these. Question, how much heavier is the tb48 with the billet goodies, from a rb32? no turbos or manifolds, no accesories. Just the full engine block and head?
basically the big block RB engine from Nissan UAE you guys should also do the ultrasound thickness block test and see if the stock block is as good as the RB26 N1 blocks. will you guys develop block braces for the TB48? or the block is strong enough to not need it?
I think they did do the wall thickness test on a ton of blocks including N1 and figured out there’s no difference. Just luck if you get an even wall thickness. It’s in a vid awhile back
@@michaelhanson2848 the TB while being a cast iron block might be different from the RB casting. The TB is used in heavy duty use so it might be tougher but can still be brittle if not done properly. Of course bad tune destroys any bulletproof engine.
I’ve tried to get a tb48 built for a decade now the only issue is money for parts. In the US I have to find someone from Saudi that sells products and is willing to ship…9/10 they are willing but shipping a intake and turbo manifold alone would cost almost as much as the parts themselves. I’ve had a block/head and crank for a long time
@@pinklightfever got more important things to worry about plus I’ve built 4 cars while I’ve had the engine. I don’t know what I would put it in if I did finish it……
@@pinklightfever just recently I bought a subie outback sport and I’m doing a full STI swap planing on 500ish whp. I pay plenty for what I want to do that’s why i wouldn’t have a use for 1000hp 2.5ft tall engine. I like tracking my cars not just speed but balance is needed.
Is this the 4.0L inline six that the Middle East guys use in their 4x4s?? I’m not familiar with this engine so could someone tell me what are its applications in regular vehicles? Thnx
That sump setup is bloody incredible
If you're going to enter a new engine category, might as well take all the learnings from RB and swing for the fences :D
TB the world.
Someone put this in a skyline 😎
You're trying to twist one into a knot arnt you😂😂
I was thinking the same. Surely its possible. Even if you ran a patrol driveline
Funny this video is up cos I been looking for weekend for one for to put a stroker in my 31
Awesome stuff!!!
Why is this only 6 minutes? We need a more in depth presentation of these.
Question, how much heavier is the tb48 with the billet goodies, from a rb32? no turbos or manifolds, no accesories. Just the full engine block and head?
Can't give you a exact weight but I believe quite abit. I've seen a rb30 and tb48 in person and the TB 48 makes the Rb look tiny in size in comparison
@@killerjaysr6714 ohh ok. I figured it would kinda be like that, but didn't know how much bigger. Thanks for the reply!
the all alloy billet block is heavier than cast iron tb48? solid no water?
That is some really epic gear! Hope to see some cool T48 projects soon!
ua-cam.com/video/IwOHLokptDY/v-deo.html
@@michaelbarnett2077 Thanks 🙏 so much for the link. I missed this Fullboost episode
Would I be the only one here wishing PRP would do old Audi 5 cylinder turbo motors next??
Yes
Billet AAN would be sick.
What an insane engine. Would love to see one of these in action out of the UAE.
Quickbitz cover a very nice build from Melbourne covered by someone else on UA-cam
Barra killer
basically the big block RB engine from Nissan UAE
you guys should also do the ultrasound thickness block test and see if the stock block is as good as the RB26 N1 blocks.
will you guys develop block braces for the TB48? or the block is strong enough to not need it?
I think they did do the wall thickness test on a ton of blocks including N1 and figured out there’s no difference. Just luck if you get an even wall thickness. It’s in a vid awhile back
@@michaelhanson2848 the TB while being a cast iron block might be different from the RB casting.
The TB is used in heavy duty use so it might be tougher but can still be brittle if not done properly.
Of course bad tune destroys any bulletproof engine.
N1 is just thermo cycled before assembly
yeah would love to see the ultrasound thickness test on TB48 blocks. The 2jz blocks were really good i wonder if the tb48 compares.
i wish the Subaru EG33,EZ30/36 had this much support
Skip the eg/ez and go Porsche M96
The stroker kits for these are insane too 5.1.50L. Want one for my Datsun 810 so bad!
impressive engineering you''ve done
You should do a comparison between TB48 and 1FZ-FE
TB48 is superior
Nice work Herman!
Works of art as usuall
I’ve tried to get a tb48 built for a decade now the only issue is money for parts. In the US I have to find someone from Saudi that sells products and is willing to ship…9/10 they are willing but shipping a intake and turbo manifold alone would cost almost as much as the parts themselves. I’ve had a block/head and crank for a long time
Gotta pay to play. If you were serious you would have finished the engine/build a long time ago.
@@pinklightfever got more important things to worry about plus I’ve built 4 cars while I’ve had the engine. I don’t know what I would put it in if I did finish it……
@@pinklightfever just recently I bought a subie outback sport and I’m doing a full STI swap planing on 500ish whp. I pay plenty for what I want to do that’s why i wouldn’t have a use for 1000hp 2.5ft tall engine. I like tracking my cars not just speed but balance is needed.
@@BobbyB910 spoken like someone who hasn’t built anything fast
Speak to RSG performance in UAE they are the best in tb48 , they are the holders of most of tb48 world records
Just needs the RB sump with the front diff.. watch how these will get popular instead of RB haha
The 2JZ crowd will cry. I still want to see it tho. 4.8L 6 cylinder can drive a really big turbo.
@@RadDadisRad the Toyota crowd have the 1FZ too, giant JZ essentially and just as capable as the TB48
This will be a beast in a chassis 💪
This is just awesome!! Can't wait to start building👍
The colours, just wow 👍
Nice work 👍
Is this the 4.0L inline six that the Middle East guys use in their 4x4s?? I’m not familiar with this engine so could someone tell me what are its applications in regular vehicles? Thnx
4.8l inline 6, comes in Y60/Y61 nissan patrols
@@patawic only Y61 from 2003-2021
I think I speak for all tb48 owners when I say “I’m moist”
Can wait to have enough money to buy all your stuff!
Awesome how much for complete kit?$$
Would this intake be suitable for NA setups?
I feel like this is the perfect platform, if you’re a drug dealer and you only deal in cash.
Lol nice
Loving the T shirt
You guys never release the 1uz engine driven pump though.
Teebeee
Love the shirt🤙
How well do these TB48 heads flow?
Clever marketing to aim for the middle east market
He says things we've been doing since 2004 🤷🏻♂️ Such engine power is found in youth cars
how many revs this engine do?
Wow
Pls do a qd32 nissain
Man these guys don't play when it comes to power or platforms.
I wish someone with deep pockets would commission a billet 6 cylinder Honda K series or giant bore/ stroke 2JZ.
For sale, 2003 TB48 GU patrol, 227000kms $25000 has shitloads of extras.
Bugatti W16 quad turbo 1600hp ----->Arab Billet TB48 sand warrior: "hold my Sand-witch"
Not a massive petrol head, why are mechanical fuel pumps the go nowadays?
What's so special about this engine?
Why has it got to be my little pony themed? what's wrong with normal colors like black and raw finish.