This video touches my soul. I literally sound just like you talking to my girlfriend about my truck upgrades or maintenance. "I'm pretty sure this part is meant to go here..." Everything always works out, but I swear it takes a bust knuckle and an extra day almost every time I work on my 1998 SR5. Great job, and I'm glad you kept it real.
Wait, your voice is same while repairing even a truck. I thought you would get tired and might sound different during garage work. Man, you are so awesome!
This was a big help, thanks! The only thing that I had to do differently is to buy a 2-1/2 OD pipe and cut it to fit the outside of the muffler and existing pipe where I connected them. I also added a little muffler cement to the pipe connections. Also - a little lube makes it a lot easier to get the rubber connectors of and then back on.
Just spent over $500 for a mbrb cat back stainless for my 2003 Tacoma with Afe resonator.needless to say it’s for SALE.took it off after 100 miles and put a walker quite flow in. So much better for what I was looking for.
Hey awesome video. I have a 2004 xtracab 2.7 and I’m a little confused on which muffler to get. Seems like wheelbase is one of the questions asked when ordering. Did you run into this? Which did you choose?
Hello Zack, could you please help me? Where can I buy the adhesive you use for the phones? And it will work for a screen replacement? Thank you and I will give you a thumbs up btw.
O'Reilly's has these..muffler and rear tailpipe..here in my corner of flyover country for $74.99. You have to wait a few days to get them shipped from the warehouse but shipped for free. Walker brand. Part# 18970.
ZacksJerryRig I see, the closest oreilly to me is abou 1:30mins. Kinda far. I’ll look in different auto part places. Excuse my inexperienced but if I go to a store what do I ask for? Thanks for taking time to reply
the temperature of the exhaust is much hotter when its after the Catalytic Converter when it leaks heat and air on vehicle parts can rust out and a fire if the leaks are near the fuel tank. a budjet repair is buying a turbo muffler and parts to install it they have some sound but do the job muffling sound and cost less than an oem replacement. as 409 stainless mufflers do rust through most notibally is mufflers and pipes by walker they rust out within a few years and more money to replace them.
This video touches my soul. I literally sound just like you talking to my girlfriend about my truck upgrades or maintenance. "I'm pretty sure this part is meant to go here..." Everything always works out, but I swear it takes a bust knuckle and an extra day almost every time I work on my 1998 SR5. Great job, and I'm glad you kept it real.
Wait, your voice is same while repairing even a truck. I thought you would get tired and might sound different during garage work. Man, you are so awesome!
Chinmay Dhumal lol, thank you!
Nice to see Zack working on bigger things.
there is no fucking way I am looking at actual mechanic videos for my car and its THIS GUY NO SHOT
Will this work on the 3.4 ?
Watched this with my 4 year old nephew. He thinks you have the coolest truck and you are pretty strong 😉
Heck ya! He has great taste in vehicles.
You should feel honoured since his dream vehicle is a fire truck 🚒
This was a big help, thanks! The only thing that I had to do differently is to buy a 2-1/2 OD pipe and cut it to fit the outside of the muffler and existing pipe where I connected them. I also added a little muffler cement to the pipe connections. Also - a little lube makes it a lot easier to get the rubber connectors of and then back on.
Jamie L I was wondering where to get the OD pipe. Where’d you get yours from? I’m doing the exact thing to my truck. Help please
@@lhernandez8811 auto zone has some
Is there a reason not to keep the exhaust pipe behind the muffler? Mine looks good.
You should use "soapy wooder" to see if the new link in your exhaust is sealed properly.
This has been a ChrisFix reference :-)
I love this channel so much.
Mike lol. Thank you!
you should collab with ChrisFix, he'll patch up your truck
Just spent over $500 for a mbrb cat back stainless for my 2003 Tacoma with Afe resonator.needless to say it’s for SALE.took it off after 100 miles and put a walker quite flow in. So much better for what I was looking for.
You should make more car videos if you want. It’s a nice change from tech
Hey awesome video. I have a 2004 xtracab 2.7 and I’m a little confused on which muffler to get. Seems like wheelbase is one of the questions asked when ordering. Did you run into this? Which did you choose?
Thank Jerry! I just replaced my muffler and this video helped a lot.
Hello Zack, could you please help me? Where can I buy the adhesive you use for the phones? And it will work for a screen replacement? Thank you and I will give you a thumbs up btw.
O'Reilly's has these..muffler and rear tailpipe..here in my corner of flyover country for $74.99. You have to wait a few days to get them shipped from the warehouse but shipped for free. Walker brand. Part# 18970.
You are the best man.
Even when you change a muffler you make it intresting to watch.
Thank you 👍
Thank YOU for watching!
Will we see a muffler drop test?
Thanks for the video! Is it common to use a torch to weld seal the joint, or is just clamps good to pass an inspection?
I hope you do more stuff like this in the future! I really enjoyed this one as well as the mouse house videos on the other channel.
I will! Thank you for watching!
Good job agent 47
Where did you buy the muffler and all the parts ? I need to buy the catalytic and muffler help !! 😂
It's been a long way, without you my friend.
-This Channel to Zack. ;)
Do you have a link to an exhaust that fits 2008 Tacoma?
I definitely see you around. Just keep with the good job man.
AWESOME vid. I’m doing the same to my tacoma. Where can I get the OD pipe connected from? Thanks
I got mine from a local O'Reilly Auto Parts store.
ZacksJerryRig I see, the closest oreilly to me is abou 1:30mins. Kinda far. I’ll look in different auto part places. Excuse my inexperienced but if I go to a store what do I ask for?
Thanks for taking time to reply
crazy you got a tacoma too real knows real fr fr
excellent work man, I just heard about this channel through facebook, keep it up! XD
I saw a red bike, introduce her to us later! =D
Nice videos zack!
Thank you, i just ordered the same muffler and clamps. video was very helpful.
videos without dislikes really satisfies me.
What is the size of the clamps?
How do I take a muffler off a 2009 Tacoma without putting it in the air do I have to run it over!!!
8:52 Zack is a demon confirmed
Nice vid. I'm about to take on a similar job but upstream further to the flange connection. Rock on!
Nice video bro
Nice video. More please Jerry
Thanks.! Very helpful...
Awesome video! Thanks! 👍👍👍
Do a Toyota Tacoma drop test!
Great video great show great work
the temperature of the exhaust is much hotter when its after the Catalytic Converter when it leaks heat and air on vehicle parts can rust out and a fire if the leaks are near the fuel tank. a budjet repair is buying a turbo muffler and parts to install it they have some sound but do the job muffling sound and cost less than an oem replacement. as 409 stainless mufflers do rust through most notibally is mufflers and pipes by walker they rust out within a few years and more money to replace them.
This was fun to watch broheim
Watching on my 2001 Tacoma
Who came here from Zack's twitter?
RENALDAS
Me hahah
Me.
JerryRigEverything
Like you had a choice? 😂
If muffler is over 5 years old and showing signs of rust, just replace... In most cars, it's quite cheap.
Sorta like a suppressor on a gun how the muffler works.
Should have straight piped it.
Captain Lag that’s what I did, it’s loud, I get dirty looks from the old farts....lol
So exhausting
I see what you did there.
8:54 red eyes!
GL
8:53 Red eye Zack
Sean Guy it's my evil twin. 'Jerry'.
Samsung Galaxy S7 I own an S7. Great phone.
dang that bed is rusty! must be alot of salt where you live
Straight pipe it dude lmao
100 bucks… rn 2022 its about 150-170 jeez haha
I was hoping for an Apple roast :'(
all that, your time material , clamps. ...lol.. should have taken it to a muffler shop for 40 bucks they put it on and welded the seem...
You really should call in experts like Lincoln before you start chopping into things like that.
I needed the WhatsInside crew!
Please Pin me boi
thats called a reciprocating saw not a skill saw dude!
ugh, your all frame is rusted
Shhh... dont let it hear you.