Wood Glue Over Oil Finish

A demonstration of wood glue adherence to various oil finishes.
Titebond II - amzn.to/3AmWFl2
Klean Strip Boiled Linseed Oil - amzn.to/3qIGJVL
Watco Danish Oil - amzn.to/2Uk0gjc
Minwax Tung Oil Finish - amzn.to/3jCjLOD

[@krodkrod8132]

Thanks for the info. I usually clean up the finished surfaces that i need to glue using alcohol. The second it dries i glue and clamp. Never had a failure. Looks like I'll keep cleaning up the surfaces. I glue a lot of stained woods together into a big block and turn them on a lathe. The stained wood between the boards looks awesome as it fades due to its penetration. Some of my pieces look like spiderwebs because of it.

[@photographyinflight4183]

I was hoping you were going to join two finished pieces together to see if it holds?

[@jibba0202]

Same!

[@georgeburchett5798]

@@jibba0202 I was too!

[@georgeburchett5798]

Thank you. I cut several pieces of wood with a scroll saw then glue those layers together. When make plaques. I was wondering if treating the wood with a oil, before cutting them, would prevent me from getting a good bond when I glued the layers together. So this was a good experiment for my purpose. You said you could not tell any difference between the treated vrs the untreated. Thanks!

[@andyboybennett]

I'm looking at the opposite problem: will wood glue hold adequately if there is linseed oil in the joint? The only "test" I've found on YT concluded that Titebond holds just as well if the BLO has had at least 48 hours to cure. The UA-camr asserts that other oils will interfere with glue adhesion, since they don't oxidize and harden like BLO does, but he didn't test them. I'm working on a project that I'd like to apply the BLO before glue-up. I think I'll just see how well I can keep the BLO out of the joints while still covering all the areas to be finished. I guess I could just wait for 48 hours, but this project has gone on forever already, and I'm anxious to move on. What do you think?

[@markifi]

why not wax over the areas where you expect sqeeze out? paraffin wax