Hikvision VIDEO INTERCOM and ISSUE CARD configuration | TurboHD X

Welcome to TurboHD X UA-cam Channel
How to configure and issue cards for Hivision video intercom
Active and change the IP address by Batch Configuration
Linked network configuration
Add person and Access group
Issue card by IVMS 4200 client
#hikvisionintercom #setuphikvision
Please help me realize my dream of 100,000 subscribes!►www.youtube.co....
►Wishing everyone good health, Thank you so so so much!!!

[@Hub01Gallery]

Helpful vedio for me bundles of thanks

[@ahmdnaube3745]

Short and clear thanks

[@HassanTinfoul]

Very important video

[@editojr.lauron5130]

Nice

[@Hi5ist]

it´s possible to use a custom template to only give access some days in specific timelapse? I try it but it ignore de custom template

[@mhdsiddi2640]

Hi, I have a doubt regarding my IP VDP. I recently installed hik vision KIS603 model in my home. I registered cards through the master card came with the device. Now after 2 weeks, my device is not reading cards. Sometimes it works and sometimes not. Any solution?

[@HassanTinfoul]

Thinks

[@ALBMEDIA]

Please I need your answer,
Yesterday I bought an Intercom Kit of Hikvision.
• DS-KV8202-IM
• DS-KH6320 TE1 (2 Pieces)
• Witek PoE switch PS205
When I plugged the monitors in to the switch they turned on and the lan port on the switch turned on and started blinking, same for the second monitor , but when I plugged the Intercom station , doesn't show anything , I have tried everything possible, but the DS-KV8202 doesn't power on , Do you have any idea what could be cause this? , do you know any type of solution?
Please I need an answer as fast as possible.

[@TurboHDX]

Hello ALBMedia Production! DS-KH6320-TE1 support standard POE (POE 48V) and DS-KV8202-IM only support distributor switch of Hikvision (POE 24V) example is DS-KAD606 can be use it for DS-KV8202-IM. Thank you so much!!!

[@ALBMEDIA]

@@TurboHDX you are telling me that the problem is with the switch ?

[@ALBMEDIA]

@@TurboHDX should I change the switch ?

[@TurboHDX]

@@ALBMEDIA Yes, this switch does not support POE powering to the DS-KV8202-IM device. Because 8202-IM only supports POE 24V. You can power it with the adaptor 12VDC. Thank you so much!

[@TurboHDX]

@UCCKuzMV8S8OwTa2ApaOiFxQ You should power the DS-KV8202-IM with a 12VDC adaptor. Thank you so much!!!

[@vetalm]

Is it possible to open it with a phone equipped with a NFC chip?

[@TurboHDX]

Hello, It’s not working with NFC, only with mifare card. Thank you so much!

[@mohideenyasir9353]

Nice