Did this with the original card I got with the ds-kd8003, everything went well until I tried to apply all changes and it failed saying the card is not supported. same happened with a Mifare chip I bought. the reader is able to read it but it fails when I apply the changes to the device. Any suggestions?
What is the connection setup between the laptop and the card reader (the unit with the bell and camera) ? Because the unit is already installed on the wall and I don't see any loose cable or port to physically connect to the laptop.
4:10 what is the importance of "*Template", I have followed your same procedure but as a test I've selected "All-day Denied" template despite keeping the ivsm 4200 running or shutting down the pc, the programmed card was still opening the door!!! So what's the use of this template then?
Dear friend I have recently gotten (KH6320 indoor station along with KD8003 and card reader) installed by company. I have tried to program a card through the process you explained, but the problem KD8003 is not showing. I've seen somebody using similar devices on UA-cam without any issue. Any idea why I am facing this problem.
The default ip address is 192.0.0.65. Try with that Ip. if not, check in the screen device managent, the outdoor device will detect automatically there.
My card is not being read by the software. But in your video it instantly reads it. I followed all the steps and the device is online. What could i be doing wrong?
Hello, I have a problem with my door station Hikvision DS-KV8113-wme1(b) with the last firmware update V2.2.53 build 220816. Unfortunately, I am trying to read a card to acess my door. When I add the person with iVMS-4200, the door station villa reads the number the card, and absoletuly fine. I add the user to organization to give permission with the template All day and aplly the changes to the device. Everything perfect.
When I try to read the card to open the door gets the message on the iVMS-4200 “Invalid Card Swipe Event” and I cannot acess.
It is a master card, pass this card over the device you hear 2 beeps, now pass the new card you hear 1 beep finally pass the master card again you will hear 2 beeps that's all.
Did this with the original card I got with the ds-kd8003, everything went well until I tried to apply all changes and it failed saying the card is not supported. same happened with a Mifare chip I bought. the reader is able to read it but it fails when I apply the changes to the device.
Any suggestions?
What is the connection setup between the laptop and the card reader (the unit with the bell and camera) ? Because the unit is already installed on the wall and I don't see any loose cable or port to physically connect to the laptop.
by network
it´s possible to use a custom template to only give access some days in specific timelapse? I try it but it ignore de custom template
can be add a user and a card for opening door 2 with this device?
4:10 what is the importance of "*Template", I have followed your same procedure but as a test I've selected "All-day Denied" template despite keeping the ivsm 4200 running or shutting down the pc, the programmed card was still opening the door!!! So what's the use of this template then?
is it possible to give user only access in time slots? e.g. Mo-Fr 8-17 ?
Since we have NFC on our mobiles, can we use our mobiles instead of the cards? Thank you
not support
Dear friend I have recently gotten (KH6320 indoor station along with KD8003 and card reader) installed by company. I have tried to program a card through the process you explained, but the problem KD8003 is not showing. I've seen somebody using similar devices on UA-cam without any issue. Any idea why I am facing this problem.
The default ip address is 192.0.0.65. Try with that Ip.
if not, check in the screen device managent, the outdoor device will detect automatically there.
@securitypartner7418
Is this in the same network?
If so OP needs to change mask address to /8
How can we remove one of the access card from these intercom
How do you make use of the SD Card on this model? Can it be formatted through admin page as it is not visible. Great content
yes. you can log in through web browser and format SD card from configuration page
My card is not being read by the software. But in your video it instantly reads it. I followed all the steps and the device is online. What could i be doing wrong?
Maybe you are using the card that came in the box, it is a master card
It was very helpful. Thank you.
What type of card is accepted or what type of frequency is it because I lost my card?
Mifare card 13.56 Mhz
Hello,
I have a problem with my door station Hikvision DS-KV8113-wme1(b) with the last firmware update V2.2.53 build 220816.
Unfortunately, I am trying to read a card to acess my door.
When I add the person with iVMS-4200, the door station villa reads the number the card, and absoletuly fine. I add the user to organization to give permission with the template All day and aplly the changes to the device. Everything perfect.
When I try to read the card to open the door gets the message on the iVMS-4200 “Invalid Card Swipe Event” and I cannot acess.
I have the same issue, did you find out solution ?
@@richardtunega485no :/
Hello, is it also possible to load a mobile phone via NFC? I've tried attaching but it generates a different number each time. Thank you
iphone is not working. ...Android yes
very good thanks
Hi
Hikvision vdp 603p
Problem is unlock failed
Installe time worked
After 3days problem
hi bro, i got offline in resource usage status and HCNetSDK.ddl[7] error. please can you help me bro?
Thx a lot bro
Error applying user to access group ....iVMS3715
Very good
Thank you
I want to get VDP configuration done so please provide for engineer number.
For Delhi
Perfect
Does not work mine
👌👌👌👌👌👌👌
يوجد داخل الكرتون كرت لم أفهم طريقة التشغيل الكرت
It is a master card, pass this card over the device you hear 2 beeps, now pass the new card you hear 1 beep finally pass the master card again you will hear 2 beeps that's all.
Hello, thank you. It has been activated