Hikvision Wi-Fi & POE Intercom Doorbell Kit: DS-KIS603-P (inc. DS-KV6113-WPE1)
Вставка
- Опубліковано 27 сер 2024
- In this video we look at the DS-KIS603-P, Hikvision's Wi-Fi & POE Intercom Doorbell Kit, which comes with the incredibly versatile DS-KV6113-WPE.
Product details ca be found here: www.dvs.co.uk/...
**MERCH** We have collabed with OnTheJob to bring you:
www.onthejob-w...
Follow DVS everywhere:
Instagram: / dvsltd
Facebook: / dvslimited
Linkedin: / dvsltd
Twitter: / dvsltd
#DAITECH #Hikvision #REALINSTALLERS
Hi. This is a good video. I got the unit, but can you show how to connect the supplied wires and pins to unlock the door?
If you set it up to call a standard SIP number when the call button is pressed, can it also simultaneously call the Hik-Connect app, or is it either or?
I need to set up a mobile alert for motion detection. However, this intercom system only sends a notification when the doorbell button is pressed; it cannot send an alert just because someone approaches.
Need advice bro Hikvision kis 603 intercom using cat 6 and nice gate motor what cable goes to motor to open the gate? I tried to connect Green and blue from front station to sbs on motor but it stops the fobs from working, and it doesn't do anything any ideas?
our unit has a clean relay output and therefore this will be wired into the open request terminal should you have one, you can also run a small voltage through it like 12VDC at no more than 1amp , its hard to be more specific as I don’t know the gate system being used,
Hi, Do you get notifications on your hikconnect app if there movement around the door bell? Lets say someone doesnt click the door bell button and you want to know if someone was there
Yes motion is sent
Great video thanks. I spent hours but notification for iphone does not work. Android work perfectly. What are we missing?
is it a shared account ? if not , uninstall app and then re-install HIK-Connect and try again and allow all when installing, also under notification centre on iOS make sure it’s on for hik-connect and in hik-connect app settings can you make sure that notifications are set to enabled
Have you tried to put SD card and to use playback function? Seem it does not work for me neither for indoor station neither for the doorbell. Could you please check? Thanks
Hi Ihor, yes I have , its reserved for future development when used in the call station, the SD card stores images and voice messages on the SD card on the indoor station , it has to be defaulted also , what model indoor station do you have?,
@@DVSLTD DS-KH8350-WTE1 indoor station stores only images and messages and doesn't store playback video which is frustrating. But DS-KV6113-WPE1 does not store anything. Why they declare in the documentation that it supports SD card up to 128Gb, which is useless. I would expect at least playback functionality. Sorry for the emotional comment...
Hello. Does this doorbell needs to be directly connected to NVR or just simply be on the same network? Can i view other cameras on the screen as well?
Also would you do set up/install video of the electric door striker? Much appreciated.
cameras on the same network can be added to the indoor station I have done video on this , and I will look at the video on the strike
I'm guessing no motion sensor?? Only activates when button pressed
Thanks for the video.
Is it possible that I pair this doorbell with Hikvision fingerprint sensor? Both would be standalone, but serve different purposes, guest would use the doorbell and we would use fingerprint sensor. I know there are products that combine those two, but then I get also some unnecessary stuff like keypad, and doorbell button itself is not very large.
Thanks for the video. Is there an option for the indoor station to automatically display the video when it detects motion (a person walking up to the door) and before the person rings the doorbell?
Hi, working on this now 😊
@@DVSLTD any update on this?
With this have a door control, could you use this with electric gates ?
yes it has the relay output on the door station for gate control
@@DVSLTD What about opening gates from a vehicle without getting out to press any buttons? Key fob? Iphone?
@@leojones2917 this has a built in reader which you can use with our Fob , from the HIK-Connect App you can call up the unit and operate the relay also yes 😊
@@DVSLTD why do NO and NC turn when starting outdoors? In the event of a power failure, the door will open when power is restored. FAIL
Hi, Excellent and Very Knowledgeable Video, thanks for sharing !!!
One Question, is there a way to connect my existing push button switch to work in parallel with the calling button of the Outdoor station ? If Yes How would be the connections ?
Hey dave , I have got a same model and I want to connect an solenoid rim lock on the door , how to wire it with the outdoor unit , I guess if poe is used to connect the outdoor and indoor , the outdoor can be used for the lock . connect the com and gnd on the outdoor station , 12v dc and no to the lock wires , am I right ?
if you want to connect a lock via the relay of this unit, then you will need a dedicated 12VDC PSU as you have said , then wire the positive leg of the PSU into the C of the Relay , and the NC leg of the relay would wire onto the + of the lock so the action of the relay changing state will also trigger the release of the door , I hope that makes sense ? 😊
The dor station and indoor station can be connected just to wi-fi, don’t use the lan cable
Does anyone know how to setup STATIC IP for WIFI connection? In the configuration you can setup static IP's only for the LAN (wired)... It is a nightmare to configure these units!!
Ohh U cant. This shit not able to do it. VERY frustrating idiots working at hikvision. You can do it other way, using your router DHCP reservation option, if it has this. This giving same (reservated) address every time to the unit you set it to
@@szegfusanya yeah my router can’t do it either (another crap).. I ended up pulling cat 5e cable to the outdoor unit… i trust cable more than wifi anyway :) it’s very stupid though to not be able to setup static IP.
Another issue is - why can’t you control the built-in relays in monitor using buttons on screen? Some of the units can do it, while this unit can’t… whole COM output is then useless
@@alfworks I’ve tried to set up this crap today and last Friday. Two days spent on it but headaches nothing else. This is most un logical electronic crap I’ve ever seen in my life. I can’t believe it hikvision made
@@szegfusanya i made mine work, but I was struggling too. The manual doesn’t explain that you need to add the indoor station IP address to the configuration of the outdoor unit, so I was always having issues with ringing after pressing the doorbell button.
@@alfworks yes it’s crazy. I know. I had all these steps with screams coz there is no logic in it. Need to “cross link” them but there is room, floor, building etc settings and im not really understand why these needs if the units needs to cross linked by IP address
Hi, nice tutorial!
I was wondering if it's possible from the hikvision app to disable or "long press" the door unlock button to avoid unintentional opening.
Thanks you :)
Are there any recessed adapters to be able to flush mount the indoor station?
its something I have asked HIK to look at
And thank you, by the way, for the video.
It is well presented and informative.
Do the mobile and intercom need to be in the same wifi to be able to open the door
Great demo, I am having issues on Android phone using Pro Control but the iPhone can pick up call without any issues. Any way to fix the calls on a android ? Thanks
hello it is possible to connect magnetic lock on outdoor station? How? 'Or' What
yes we have the relay function , you can use a separate PSU for the lock and use our relay to control the voltage to the lock 😊
@@DVSLTD so if I understand it cannot feed directly take the magnetic lock?
@@technologie-artsmali6087 Sadly we don’t provide power output for that ☹
DS-KV6113-WPE1 can it be used without buying whole kit (without monitor). So I can directly use it with NVR and Hik Switch but no monitor?
this model supports POE and direct to HIK-Connect with custom firmware, it can be added to NVR as video channel also yes
@@DVSLTD so we have to overwrite original firmware to make it work?
@@sohail_irfan Yes it’s a custom function found here www.hikvisioneurope.com/uk/portal/?dir=portal/Product%20Firmware/Hikvision/Access%20Control%20%26%20Video%20Intercom/Video%20Intercom/Second%20Generation%20Video%20Intercom/Villa%20Door%20Station
Can you connect these doorbells to chime? Or only to indoor monitors which will then produce sound?
the indoor station has a relay function that when called you can activate the relay which then you can wire into a chime or sounder unit
@@DVSLTD Thanks for replying. But speaking of wiring - from doorbell via switch to indoor unit, than to chime? In may case chime is close to door and close to switch and on the other side of house is monitor (far away). Wouldn't it be better to connect some sort of relay directly to switch? Just a thought - I want to prevent double wiring...
@@tomk6401 the call station will wire in cat5/6 to the POE switch , same as the indoor station, then from the chime unit you will take a pair of cables from the relay on the rear of the unit , like bell cable or alarm cable, then depends on what unit is used but you want to run the low power side via the relay so when energised it will power the sounder / chime unit
For the DS-K8003MEI How do we get a playback view on the app? I inserted the SD card into my intercom monitor but still get no play back on app.
Joffrey , have you added the camera to the NVR ? or just intercom to app, ?
@@DVSLTD I've added app and Connected Live view to NVR
Thanks for the review, brilliant stuff. I have HiLook PoE NVR with 6 HiLook cameras and wondering if I can add these cameras to be viewable on Indoor station. TIA
Hi we had one of these fitted and the sd card keeps saying tf card exception, I've tried 3 different ones and same issue
where is it fitted external or indoor station ??
Can I use this to control multiple doors?
@DVSLTD Any idea why the indoor unit is not working with the hikvision encoder? I have a analog camera that i converted to ip using the encoder but for some reason it’s not allowing me to view it on the indoor station. I’m able to view the analog cam on HikConnect app
Hi providing you have added this correctly can you go to the device settings and on the HIK-Connect platform settings please turn off image encryption
@@DVSLTD I’ll give that a try. Thanks a lot!
@@DVSLTD sorry I’m not sure if I explained my self correctly. I’m trying to add the encoder as a ip camera to the indoor station monitor but I’m getting this error "live view failed. Connection exception accrued"
Encoder model: Ds-6701huhi
Indoor station model: Ds-kh6320
@@menachemize that should work , I will have to take a look and see if I can work this out , did you try making the hikconnect function on the DS-67HUHI disabled to see if it then works on indoor station?
Another question. Even though first gen Hikvision WiFi doorbells will call the Hik-Connect app, and the app will log motion detection events, for some reason it won’t log missed calls. Is this addressed with the new doorbell?
can i add more than one outdoor unit? let see 2 pc outdoor unit, that can be connected to the indoor unit, because i have 2 doors.
Yes it supports 2 outdoor unit
@@DVSLTD then how can i but the second outdoor unit.
Many thanks for the great video.
Is the HIK CONNECT app still in operation or should we be utilizing ivms 4500 app on our phone for this video phone system?
Can you show how did you connect the lock ? And the exit Button ?
Yes please I would like to see this too..
I am unable to issue a card from the web browser and IVMS 4200. Do you know how I can fix this ?
What kind of SD card is supported in this?
Hello,
This video as a review is pretty different to the firmware / webpage, could you do a new setup video for the same doorbell unit but for todays firmware, add a sd card for recording and add an access card for the door.
Hi David, Is this connectable with iFTTT or like lock from Nuki? It's safe some changes in the frame of the doors.
And is it possible with this doorbell to connect a wired chime???
IFTTT is being looked at , they have put that inside the latest EZviz App , so then I don’t think it will be long before it migrates over, will ask the Question
Can the KV6113 (WPE-1(B) be fitted on my gate and work wi fi without requiring a cat 5 ethernet hard wired cable?
Thanks
Correct if the WiFi will reach it
@@DVSLTD Thank you. much appreciated
Could the lock output be connected to gates to open gates
Hi callum, yes they're volt free if it needs mains control just interface a mains rated relay into this
DVSLTD alright, cool cool I’ll be getting this soon hopefully
In vdp kv6113 after connecting door sensor, where do we get the door staus and where do we configure the same.
You are correct
Hello im from Argentina and i buy this doorbell... But its only work with cable red.... How i configure this doorbell wifi conection ??? Thanks you !!!
Would be a great option from DB1 f there was an Option for chime.
Hi, you can actually trigger a relay on the indoor station when a call is made, this can then trigger anything you want IE a chime
@@DVSLTD Can you trigger a lock strike and a chime?
@@afro208 yes this unit has a relay on the rear of it , it can trigger a chime from the indoor station call linkage action , on the indoor station you can trigger a relay to then make sounder / chime work
hii can u make a video how to install it
How are you able to record to an SD card or must you have it connected to an NVR? The SD card slots on both the door station and the indoor station are "reserved, i.e. not in use.
Its for future development , it will capture the images of the person calling if that helps , but most just add them as a channel to the NVR / DVR yes
Hey Dave, can you have motion detection on this? And I’m having an issue where I can’t see the intercom come up as an online device on my customers NVR but it’s definitely on the network, any ideas?
Can this be connected to a hikvision DS-7608NI-K2 / 8P instead of the injector route ???
Hi, yes to power it but it wouldn’t then see the indoor station unless also inside that POE network and then cant see HIK-Connect for App function so not worth it
@@DVSLTD thank you.
I am guessing that the file dump from the camera could be directed to, while on the same network as a NAS / NVR which is powered by POE injector / switch ?
I mean doorbell, screen, POE switch & NVR on the same network / vlan and the feed from the doorbell can be dumped to a specific location NVR or NAS ?
Hello, is 720P in Hikvision model DS-KIS203 7" Video Door Phone any good? Thought 1080P would be the way to go? Please advise if this DS-KIS603P is a 1080P system? Thanks.
Hi, i needed how to wire this with indoor intercom :(... cant find anything. And its not clear on their manual.. help please
when you say wire?, there IP so need to both go into the POE switch , then use the Wizard on the indoor station to set then units up
@@DVSLTD oh i have some wires and pins they came with the package..
@@441greenleaf Yes that’s for the lock output , door contact etc etc.
Nice video! Can you disarm the AX-Pro with the card as well?
you mean use the same card for access and AX-Pro ? 😊
I need the doorbell unit to activate a chime when pressed, how would I do that please?
hello. I could see visitors' photo in the app while using this device. I reinstalled for the new monitor, but now I can only see visitors as alerts. How do I set it up so I can see visitor photos?
Any way of making this ring the second HikConnect app the doorbell is shared with, seems to only ring the main user?
pete, its being looked at
@@DVSLTD thanks
Hi, if I was to connect this via wifi, would it integrate with my existing DS-KIS703-P setup?
For example, if the doorbell rings, will it show up on the monitors and alert my mobile like the intercom station.
Thank you
great question , to be honest as the 2 call units are very different I don’t think it would work that way in essence, albeit it I have never actually tried it as we haven’t had that need , I don’t have any time for a couple of weeks to do this but I will try
@@DVSLTD please, if you could that would be fantastic, I’m looking for video doorbells and have considered RING, but as I already have a hikvision system with Hik-Connect, it makes complete sense to stick with hikvision products. Thank you and l look forward to the video / reply in a few weeks.
Can this doorbell supply the 12v to the electronic lock? Or I need an external PSU to the electronic lock?
HI, I have just purchased the door bell (intercom) and internal monitor, dont have internet at present and no instructions on how to wire these units up, or set them up without internet. an you help please
Hello Thanks for the video.
How can I record a video when button is pressed? or when a motion is detected?
Gostaria se possível você fazer um video ou informar uma solução de video porteiro IP com tela pra ambiente externo que permite duas abertura de portas.
oi, e obrigado por fazer contato, já os temos no canal, no interfone modular e na unidade das últimas semanas o kit DS-KIS também tinha 2 portas :)
@@DVSLTD Que legal, você poderia disponibilizar o link do vídeo ? OBRIGADO.
Hi great channel by the way thank you
is it possible to add in the CCTV DVR from HIK POC CAMS ? or must be IP NVR CAMS ? and possible to add all cams or just the 1 ?
Hi,
Can you wire the door station direct to Hikvision DVR and get access to hik-connect app or do you still need to use an indoor station?
I already have an android tablet with Hik-connect installed on my wall which is connected to my DVR so don’t see the point of getting an indoor station.
Cheers
If you upgrade it to the latest firmware V2.1.5_200904 you will be able to add it to Hik-connect directly without using indoor station.
www.hikvisioneurope.com/uk/portal/?dir=portal/Product%20Firmware/Access%20Control%20%26%20Video%20Intercom/Video%20Intercom/Second%20Generation%20Video%20Intercom/Villa%20Door%20Station/Europe%20Customized%20Build200904_support%20adding%20to%20Hik-connect%20directly
Were you able to make it work as a standalone with Hik switch and NVR/DVR or whole kit is must?
How to I perform a physical hard reset on the doorbell? Uploaded old firmware and won’t accept my password anymore
Can’t you plug this into your hikvison NVR and record also ??
Yes you can add the camera from the intercom to the NVR to record
@@DVSLTD brilliant thank
One more question hikvision have numerous models are all the lenses the same
I’m doing a residential house for a family they’ve told me to just get the best hikvison one
So need the best camera lense as I believe they all do recording and phon notifications
@@tristanedwards1340 yes they do , that unit is one of the better one’s mind 😊
can we connect additional wireless monitors(more than 1) to the door station.?
Sure you can
Yes you can have 1 master and 5 indoor extensions
So, if I understand correctly, we can connect internal extension monitors (powered over 12 vdc) via WiFi to the main internal station. Or does it have to be connected over ethernet?
@@fahy01 I think it works only with Ethernet cable.
I dont kbow why but it is like that.
Hello. Where can I get more information? I need a video doorbell system. 4 apartment outdoor station. 4 indoor video stations. All on CAT 6 wiring hence IP based.
Hey mate, can the integrated card reader on this unit, be linked to a third party access control system like inner range or ICT protege?
sadly not , its just for use with our product currently
Brilliant!
Hi. I purchased this kit. All working perfect but when u press the door bell, the indoor station rings but not on Hik-connect app! You will miss all the calls from the doorbell on the Hik-connect app. Any solution on this?
Does someone know is it possible to add extra ring button that would be connected to one of inputs and that would trigger the same behavior as I would press button on itself directly?
Hi , it’s not possible the inputs are for door contact or door release and not door ring currently sorry
DVSLTD Thank you for response. Do you maybe know for some other intercom that could work in that way?
@@zeljkotodor not off the top of my head, let me see if I can I will let you know
Is it possible for the intercom to automatically record the call duration when the intercom ring button is pressed? I can only find settings to 'manually' record via the web browser log in. It would be nice to be able to save recorded video when the doorbell button is pressed (I know it automatically does a screen capture) **I'll be hooking this up to my NVR** TIA.
I don’t think it is to be honest, will check
Hi, I have the kit and it did not come with the PSU's, is that an extra or what rating PSU will i need ? Also , my plan is to use an existing door bell mains flex cable to carry the 12V and then connect the data with wifi. Any issue with that? Many thanks
Hi, do you know if it is possible to silence the busy tone? If some one calls and it initiates a connection with the indoor station. Sometimes I don’t wish to speak to the caller and just open the door. Hitting the terminate button sends a really loud busy tone to the unit. Thanks
just discovered your channel, what i was looking for. What do you think of the DS-KB8112 video doorbell/best video door bell without needing a monitor? Thanks
Can the live view feature on the indoor station be used to monitor TurboHD cameras on a connected DVR, or is it IP cameras only? This looks like a great piece of kit and at a price competitive with the consumer doorbell cams...
It definitely works with Turbo HD cameras ;-)
hello, but is it necessary to buy the monitor? can it only be used with smartphones? thank you
There is a firmware on the Europe portal to allow unit to be connected to HIK-Connect direct without the indoor station
@@DVSLTD thanks, but does it apply to all other devices that you can do without the monitor? or just for this device?
KV6113 can work without monitor, connects the phone using Hikicommect
My question is, will that doorbell intercom work via hik-connect if I were to it standalone or do I have pair it with an indoor station.
I am watched further on so it's answered .
Hi , it’s the indoor station that connects to HIK-Connect sorry so you need this even if hidden away
@@DVSLTD Makes the whole product a complete waste of money. I just invested in a £2,000 Hikvision all singing all dancing NVR setup. I connect my other 5 cameras via POE to get around the clock recording. Why wouldn't I want to do the same thing with this? Hikvision have messed priorities sometimes.
Hello, nice video.
Is it possible to put this system to work with google home?
Any idea what the voltage rating is for the 2 relay contacts on the DS-KH6320-WTE1?
I can’t get my god damn doorbell to connect to the internet via the app. I’ve tried like 50 times. It won’t even open up through IP address, so I can’t configure wifi on it until I can access it. So frustrating..
unless it’s faulty have you tried it on someone else wifi to check it does work ?
Totally lost me at 3min 18secs when you opened the software. Does that come with pack, have to download it etc 🤷
Hi , easier to download from HIKvision Europe portal
Looks great. How does the system work if I am offsite?
Via HIK-Connect P2P App
@@DVSLTD But does the smartphone app rings even if I am walking and I have my phone in my pocket? It's like receiving a normal call?
@@Edoardoslaviero Correct , on apple is uses apple call so would be like a call , on android it would be a app notification and you accept and answer this 😊
Can you open multiple doors on one click during an emergency, say fire?
If you use our access control product then yes that is possible but not via the intercom system as there door entry rather than access control
Hi there, I have a question. I want to put the doorbell and the indoor unit on a poe switch, then make a vlan so it's in the same subnet as my NVR and camera's. I've found in the manual the the doorbell as is standard IP address, and you need the activate the unit before you can configure it. When you activate it tru the software, does it still need to be on the same subnet? When it's activate I can change the IP/subnet?
good question , in reality if there on the same VLAN and can talk to each other , it should work as you need to point the indoor station to the outdoor station , we have had it working before but we do also see issues with VLANS and network setups , best advice I can give without seeing it is try it 😊
Thx for your fast reply, I will give it a go. I've seen some videos that you can activated the indoor station on the unit itself, create a password and then you can change the IP to the desired one. How is that on the outdoor unit? You have to activate that separate? Or will the indoor unit find it?
@@jeroenbrouwers3976 the outdoor unit you can use SADP tool or depending on what version outdoor the web browser , using the free SADP tool will allow you to active and change the IP details in the 1st instance 😊
@@DVSLTD I have set it up, everything is working.... Accept, the green light indicator of the door access is on 24/7 on the outside unit. My lock on NO, do I need to change something in the software on the door output?
@@jeroenbrouwers3976 is the door lock not operating at all or just the light that is on ??
I can not understand why Hikvision haven’t used the SD card for motion images and capture of live calls even if they had allowed this on the internal monitor so images are in a protected area it’s a missed opportunity with this product and a big one at that.
It takes snapshots and you can manually record from indoor station , I am also pushing them to save the video from motion or a call , I think it’s achievable 😊
@@DVSLTD Hello, I have a question why I have bell icons and not photos of people who called?
Nice review thanks again
Can I connect the doorbell using WiFi?
I assume you can access the device over the internet? But do you need a static ip address?
You can use HIK-Connect for receiving the call , which doesn’t need a fixed IP , if you want to access it to programme then yes essentially
@@DVSLTD Thanks for the quick reply. No just need to be able to pick up and respond to the call anywhere. We're just about to install our first one in a small club with no network so I'm supplying a PoE switch and linking that back to their WiFi router. I assume we then just configure it all using the web interface of the device?
@@SamsaraEquitation yes just use the web interface and configure , and add to HIK-Connect app the indoor station assuming you are using that , if not then we can use firmware to get the villa call station added to the app direct
@@DVSLTD Thanks again. Perfect
in 2021 which is a better pick kis603-p or kis602
Very different markets and styles , both are very good 😊
Can you connect more than one door station to this? And also have separate monitors? We have a 3 Story house with 2 entrances so need 2 door stations and 2-3 monitors, and also want to be able to answer from our mobile phone. What would you recommend?
www.hikvisioneurope.com/portal/?dir=portal/Technical%20Materials/07%20%20Video%20Intercom/03%20%20How%20to%20Guidance
choose "How to use door station and sub door station to call indoor station.pdf"
if the indoor station has to point to the outdoor station, what happens if you have two outdoor stations? i.e im planning on having one indoor stastion, a doorbell intercom and also a intercom on my gates?
Based on Hik idiot logic, you have to pair the second door unit (as SUB door unit) with the main door unit (!!!!!!!!!!) So not that way as every single normal brain thinks,( pair every doorbell with the monitor). U have to set same door floor building etc on the sub unit but unit number on main need to be 0, on sub need to be 1
I have the modular System Connected to my NVR. However it can’t connect to NVR. Just saying “Detecting....”. Is there a way?
i was abele to set this up, but the nvr will always crash, this is a problem if found on a different topic also.
I seems to work connecting it to a synology diksstation.
Hi , you can add the IP camera on the modular to the NVR yes , you need it to be in the same IP address as the LAN of the NVR then add as standard IP camera , are you connecting it to the POE port of the NVR ??
DVSLTD thanks for your feedback. So the cameras are working fine. The intercom is connected to the NVR using POE(same as the cameras). I have power on the intercom as it lights up at night. When I connect a screen directly to the NVR, it keeps showing “detecting..”Is there a possibility that the NVR and Intercom are not compatible?
@@andreimarian5491 Hi , there compatible, can you add the camera via the LAN port instead of the POE?
Cannot see this Hik-connect app anywhere, any ideas?
On android you can only download from the web.
You can not find in in the play store
Does this Intercom Doorbell support ONVIF?
just tested it with ODM and it doesn’t yet support the ONVIF output , I will ask if on plan
Hi there, I know the indoor station has the capability to show other Hikvision IP cams, however I'm struggling to get the video feed to show up, i'm assuming there are factors of video encoding, bitrate etc configurations that can only be displayed on the unit. Are you able to do a video on how to add that in?
sure I can do this , in reality its using the IP of the camera , NVR or DVR when adding a camera to indoor station , IE 192.168.1.100 ( or whatever ) then RTSP port is set to 554 , then username and password of the device your connecting to , and channel number will be 1 , or 2 for camera 2 of NVR / DVR 😊
@@DVSLTD I have the cameras hooked up to the PoE ports of the NVR, so I assume when adding a the camera (via IVMS) I would type in the IP address of the NVR and the channel is what defines which camera is added? Either way, I think this would be beneficial to know for others also :)
Figured it out from your instructions above. Thanks!!
How to connect with mobile app? Which app to use in Android?
please use HIK-Connect
Do you get psu's in the kit? Thanks
Hi I got a full hikvision ip POE system I installed, the house currently runs ring Pro, but I find the quality service and the chimes useless, I have seen the WiFi doorbell by hikvision, the older pro poe, and these intercoms, what would you recommend and do they work well with a chime
Hi and thanks, the new Wifi smart chime for the EZviz model is really good , the POE intercoms are also very good if you want a intercom system with app support and relay control , so plenty of choice and very reliable
@@DVSLTD thanks I will look into the WiFi chime and ezviz
@@DVSLTD Ha how weird just purchased this and was looking at videos and found my old comment... Didnt realise I will have to wire it into the network, and not into the NVR, is that a possibility though NVR POE?
Hi, does DS-KV6113-PE1 support SIP and optionally ONVIF protocol ?
it does have SIP support , it works for the RTSP and HIK NVR , but I will check for ONVIF
Hi sir i forget the password please help me how to get password?
hello people
i am using the
can someone please help me with my questions,
iv got 2 problems.
problem 1.
I want to delete a lost (card TAG) from the unit using Ivms-4200.
I found the import button and can change some settings, but how to export them back to te unit.
problem 2
Everting is working fine, but when 1 open 2 way audio in the hik-connect app by hand (manually) it will only work 1 time.
Is done I close the app.
won'tvideo (on the mobile device iPhone) but the two way audio wil always fail.
I found one topic on the Internet about this what there was no solution.
I hope some of you guys can help me.
thank you very much
Hi Dai, have you tried this in Wifi? I currently have the DS-KB6403 which is easily the worst ever product I have encountered with HikVision, this works occasionally and is an expensive paperweight. I’d hate to purchase another product that is just as bad
Sorry Dai, any chance of an answer? I am a customer of DVS. I was wondering what the Wifi quality of the door intercom in particular is like in comparison to the mentioned product. My review of it is mirrored by your sales and support staff
Can we connect to NVR of different company like CP plus for recording ?
Yes the camera allows the NVR connection from the intercom 😊
@@DVSLTD thankyou brother
1) I have CP plus NVR so it will work with it ?
2) will it continue to record even if the outdoor button is not pressed
Hi, where can i get the latest firmware? I have V 2.1.3
we always use the UK portal www.hikvisioneurope.com/uk/portal/?dir=portal/Product%20Firmware
Nice video! Anyone have any luck setting this up to record to an NVR? I have my door station on a POE switch and it works fine on Hik-Connect, but whenever I manually add it to my Hik NVR, the NVR freezes and reboots in neverending a loop.
Have you had any luck with this yet? I'm considering one of these but it would be nice to have it recording to my nvr as well. What nvr do you have?
Likewise, I am considering this product and would also like to record to NVR 24/7. Have you made any progress solving the issue?
Mine is a WGCC UNNVR-302S-P8.
@DVSLTD any help with this seems to be a question iv seen a few times with no answer?
Anyone have any luck with this? i got this up and running fine then it decided it didn't want to work anymore and now regardless of what IP address i set in the NVR it goes into this wonderful loop. From what i have read, the loop is caused by a network error usually when 2 devices have the same IP. i can only think its due to the door station needing to be set up via wired connection then being used over wifi. Its driving me mad!!!!!!