i dont get wgy people are complaining, its a decent process but its not that complicated with videos like these. This vid is gonna save me a couple hundred. Thanks man!
I said fuck it, I'm trading Ariana the Acura. Might get a used Infiniti IPL. Hendrick Acura here in KC wants over $450 to fix the bulb. Hell I only put $400 down to finance it. I rather just pay a couple hundred bucks on a down-payment + trade before I dare spend that much on a bulb replacement.
I changed the bumper and the headlight bulb on TL 04 today following this this video!!! IT WAS A SUCCESS!! Without breaking anything lol Thanks dude 🙏🏼
Looks like too much trouble. Saw another video where you don't have to remove the bumper. I wouldn't try it without this video, though, because they couldn't show a good view of the bulb housing. This video fills that gap. Thanks!
I also did this back in 2009 when I sent mine in to be cleared for my Modded WDP TL Type-S . Cleared with carbon fiber from a guy on AZ. Then I put in all LED's cleared all. LED Turn signal amber/white flashing etc. Take you time guys. It is simple. Like making Killer home mad Lasagne :)
These directions work well for a 2006 as well. There are a few differences in the attachment of the bumper cover at the wheels, screw instead of a 10mm.
it's the worse thought out design I've ever seen for replacing headlights. I did it myself but if you take it to acura I'm guessing they need to charge you 500 for parts and labor. for freaking headlight replacement!
You don't need to remove the bumper. Pull the inner fender liner back. Plenty of room to get to it. Drivers side you could even remove the battery and have plenty of room to get to it.
Just removing the battery on a 05 does not give enough room. Taking the headlight out or removing the wheel and wheel well can work also. This was absolutely the most convoluted bulb replacement I've ever had to do. Someone who doesn't do their own stuff 100% has to take this to a garage for light bulb change. Insane.
Guys don't need to take the whole bumper cover off, you can do change bulbs from inside. But if you want to swap the modul you have to take the bumper out then
Thanks for the heads-up that a security torx is required. Would have been nice if you'd have told us the size as well. ☹️ It's a T20 "tamper-proof" or security torx.
Great video, now I know never to try to do this. Was thinking about changing out my 05 fogs to LED's, that thought is now gone. I'm assuming Acura made changing the lights this difficult due to the 2g TL's HID's getting stolen all the time. They were a huge theft item back in the day when HID's were new technology, everyone wanted them, and they were easy to steal off the 2g TL.
Question, I just had my passenger side to blow on me. currently my driver side still burns but at times flicker. is there a ballast that I would need to change to or will changing that bulb too solve the flicker? Where did you order your bulbs ? I saw where you posted the after market ones don't last. Dealer or online from Ebay?
Hi could you help me identify the bulb size I need ? I have a 2004 Acura TL and one of my bulbs is going bad (it turned pink) as far as I know they are xenon and I would like to put LED’s.. I’m a little confused with the whole low beam/high beam and fog lights location so I’m not sure which bulb size I need. So the d2s are the inner bulbs or the fog lights correct? So driver side the d2s would be the bulb on the left or right ? I need the bulb size for the one on the right if we are looking at the driver side... is that d2s ? I’ve also seen a 9005 and 9006 that fits my car but have no idea which goes where. Sorry for the long message but could you help me out please ? Thanks!
Please pay attention!!! Im online looking for something else and seen this. I changed my wifes 2008 TL and was about to remove the bumper and then realized. I removed the rim, peeled back the plastic wheel well and looked up and seen the cover for the bulb!!! S.O.B I almost removed the whole bumber. You have to unscrew it blindly. Hope this helps
9:40 That reflector wire. I changed my bulb without taking off the bumper and would like to know how to put the reflector wire back on there without taking the bumper off. And what is it for? Thanks
hey do you know what could be the problem with my acura tl right headlights my low beam does turn on but my high beam does do you know what t could be ?
Good video.. Thx.. Is there a part number for the back covers for the hid bulbs? Both of mine have been torn off.. Are they a part u have to get from the dealer?
hello I bought new light bulbs and when I turn on the lights the color are white how they suppose to look then they turn yellow. do u know what can be causing the issue ??
I've had some comments over the years that it's possible to replace without removing the bumper. I have no idea how they did it. Even removing the splash shield doesn't provide enough working room. Don't forget, you have the cover over the bulb assembly. Nonetheless, you can give it a try. Hope it works out!
EASIER METHOD: I've done this job twice now on my 07 and wish someone had explained this to me. If you are just changing the bulbs, don't remove the bumper. The driver's side can be done by removing the battery and battery tray. You can then reach right in there to twist off the cover, pull it out, and change the bulb. The best way on the passenger's side is to remove the wheel and peel back the front half of the fender liner. This headlight has a T20 security screw that you need to remove. There is not one on the driver's side. Once you peel back the liner, you can get to the screw, remove the cover, and replace the bulb. Having done this twice, I can do this in under an hour from the time I enter my garage to the time my tools are all put away. Should be no more than a 2 hour job your first time with this method.
I got a guy to do it at his shop I only paid 150, I wouldn't have been able to get the dent out of the fender to mount the light myself without fuckin something up! Im satisfied, but thanks for the video it was very informative! happy New Year brosky!
Do you have to remove the bumper? What kind of engineering is this? If that is the case. I have an 05 rl and I hope I don't have to go through like this.
Wow you really need to take out the entire headlight to change the bulb? Well, I wanna delete my intake resonator and taking that bumper off kinda seems fun.
wow im looking at a TL to buy and I was thinkin oh ill get some new headlights and led bulbs like I do with most cars I own but wow this is the most complicated vehicle ever just to change A bulb , I almost don't wanna buy it now because of this hassel to do anything mechanical or cosmetic on this vehicle like why would they make it that complicated ?
Yall are cracking me up with the comments. If you aren't interested in taking a front bumper off then why in the heck did you decide to purchase a 270hp fancified accord type R? I'm sure your home entertainment system needed more work
CarsNToys you ever thought,about making a walk around video of the car? ive never seen a video of an acura with the ron jon kit and im sure a lot of people wanna see one to get a better idea what it looks like
My headlights drive me nuts so I put them in the oven @ 225 degrees, etc.. What a pain in the A$$ To get all the old Glue out of the groves so I could silicone them back together. I did that around 2015. Its 12:11am Now sat. Jan 5th 2019. Shabbat Shalom = Peace . Later , I am 10-7
CarsNToys I just turned my wheel all the way to the left removed the wheel well and everything was exposed mines didn’t have a cap. So someone had that issue before and left it off. I removed the igniter, then pulled the clip that holds the light 💡 bulb one to the left and the other towards the right not just straight back and replaced everything. The hardest part was getting the light to stay in place when putting it back but eventually I got it and everything works.
i dont get wgy people are complaining, its a decent process but its not that complicated with videos like these. This vid is gonna save me a couple hundred. Thanks man!
Happy to help!
My headlight just went out last night...Looking at this makes me wanna sell the whole damn car.
lol I don't blame you. If you decide to do the work, use factory bulbs. The cheap aftermarket bulbs don't last.
Thanks for the tip...Now im scratching the "idea" of aftermarket "bright" bulbs
Mine just went out also and looking at this video is giving me a headache
I said fuck it, I'm trading Ariana the Acura. Might get a used Infiniti IPL. Hendrick Acura here in KC wants over $450 to fix the bulb. Hell I only put $400 down to finance it. I rather just pay a couple hundred bucks on a down-payment + trade before I dare spend that much on a bulb replacement.
Lol
I miss my old 95 Integra .
Headlight bulbs took about 3 min to change but my 05 TL ?
Holy crap !
I changed the bumper and the headlight bulb on TL 04 today following this this video!!! IT WAS A SUCCESS!! Without breaking anything lol Thanks dude 🙏🏼
Just used this video and it was spot on. Took me no time to swap out a new bulb and get a friend back on the road. Keep up the great work.
Sweet! Glad to help
Looks like too much trouble. Saw another video where you don't have to remove the bumper. I wouldn't try it without this video, though, because they couldn't show a good view of the bulb housing. This video fills that gap. Thanks!
I also did this back in 2009 when I sent mine in to be cleared for my Modded WDP TL Type-S . Cleared with carbon fiber from a guy on AZ. Then I put in all LED's cleared all. LED Turn signal amber/white flashing etc. Take you time guys. It is simple. Like making Killer home mad Lasagne :)
How did you like the LEDs vs the stock bulbs?
Thank you so much! I am too big and clumsy to replace the lights without taking off the bumper . Followed your video and had no problems
These directions work well for a 2006 as well. There are a few differences in the attachment of the bumper cover at the wheels, screw instead of a 10mm.
Great vid man, but I just took the wheels off and removed the tabs. It was reachable but difficult wit limited space.
I think I'll just duct tape some flash lights on my hood, probably a lot easier lol
Me madre me madre me madre haha
Literally my first thought too 😂.
it's the worse thought out design I've ever seen for replacing headlights. I did it myself but if you take it to acura I'm guessing they need to charge you 500 for parts and labor. for freaking headlight replacement!
@@louishuynh8521 Yea I’ll just do my own fixes 😂😂
Lol me and my buddy, Two 20 yr old kids did this in 2.5 hours and you all are crying about it?? 😂😂😂 take it to Acura already then
Nice video man! Straight to the point with the right amount of narration. Great job bro!
+Jrry Khurl Thanks dude.
Well I just got my bulbs in today so I'm gonna give this a try tomorrow. I have tools and automotive experience but I still don't wanna do this lol.
How did you turn out?
It went well it took about 2 hours and it really wasn't that bad I appreciate the very detailed vid on this.
@@BroMassGainz 2 hours ? What a snowflake
You don't need to remove the bumper. Pull the inner fender liner back. Plenty of room to get to it. Drivers side you could even remove the battery and have plenty of room to get to it.
Just removing the battery on a 05 does not give enough room. Taking the headlight out or removing the wheel and wheel well can work also. This was absolutely the most convoluted bulb replacement I've ever had to do. Someone who doesn't do their own stuff 100% has to take this to a garage for light bulb change. Insane.
Guys don't need to take the whole bumper cover off, you can do change bulbs from inside. But if you want to swap the modul you have to take the bumper out then
Mike Zaborsky I try doing it but the torx screw I have is hard to remove at the angel
Its hard to get to that security screw
Thanks for the heads-up that a security torx is required. Would have been nice if you'd have told us the size as well. ☹️
It's a T20 "tamper-proof" or security torx.
Great video, now I know never to try to do this. Was thinking about changing out my 05 fogs to LED's, that thought is now gone. I'm assuming Acura made changing the lights this difficult due to the 2g TL's HID's getting stolen all the time. They were a huge theft item back in the day when HID's were new technology, everyone wanted them, and they were easy to steal off the 2g TL.
You could replace the fogs without removing the bumper easily bro
Question, I just had my passenger side to blow on me. currently my driver side still burns but at times flicker. is there a ballast that I would need to change to or will changing that bulb too solve the flicker? Where did you order your bulbs ? I saw where you posted the after market ones don't last. Dealer or online from Ebay?
What a royal pain in the @$$ just to switch out a light bulb.. Great design Acura, motherf***ers.
+markofied Don't change a wheel bearing. Still stuck in 1960's.
😅😅
I need a man like you. Great video and thanks for guiding me through mine.
Good video , saved me hours.
Hi could you help me identify the bulb size I need ? I have a 2004 Acura TL and one of my bulbs is going bad (it turned pink) as far as I know they are xenon and I would like to put LED’s.. I’m a little confused with the whole low beam/high beam and fog lights location so I’m not sure which bulb size I need. So the d2s are the inner bulbs or the fog lights correct? So driver side the d2s would be the bulb on the left or right ? I need the bulb size for the one on the right if we are looking at the driver side... is that d2s ? I’ve also seen a 9005 and 9006 that fits my car but have no idea which goes where. Sorry for the long message but could you help me out please ? Thanks!
Hi Pasquale. Yes, it's a bit confusing. I'll upload a video in a day or so showing each bulb and the part numbers.
CarsNToys thanks a lot!
CarsNToys don’t forget about the video please lol thanks!
Why do the high beams suck on the 3rd gen TL?
Please pay attention!!! Im online looking for something else and seen this. I changed my wifes 2008 TL and was about to remove the bumper and then realized. I removed the rim, peeled back the plastic wheel well and looked up and seen the cover for the bulb!!! S.O.B I almost removed the whole bumber. You have to unscrew it blindly. Hope this helps
BTW the video was great.
Nice i would much rather do that. I'm pretty sure you could also just remove the battery on the driver side
Great video man. By any chance you know the part number for the HID bulb.
theyre d2s
What is the reflective wire for ? I broke the wire when trying to replace a bulb . Is it necessary to get the bulb to light up ?
9:40 That reflector wire. I changed my bulb without taking off the bumper and would like to know how to put the reflector wire back on there without taking the bumper off. And what is it for? Thanks
I know I’m 7 years late, but I just encountered this and would like to know what was the result
hey do you know what could be the problem with my acura tl right headlights my low beam does turn on but my high beam does do you know what t could be ?
Try this - ua-cam.com/video/PSjJQDwMoDA/v-deo.html
I know nothing about cars. Should I take on this challenge? I have one of these with both lights out !!
Thank you !! Easier than I thought
This is very very simple. Get the correct tools. Take your time. JD TL-S AZ Thanks . I know the owner of that car :) Peace
Good video.. Thx.. Is there a part number for the back covers for the hid bulbs? Both of mine have been torn off.. Are they a part u have to get from the dealer?
+croftpydy croftpydy Yea I purchased them from the local dealer.
Say I forgot to connect the reflector, What would happen?
where can i find some LED bulbs? i like LED better than halogen hid or xenon
Hmmm... I did mine without removing the bumper 2007 tl type s. Took me 20 min
how you did it the easy way
Kenny powers can you make a video?
You can just turn the wheel all the way out and do it.
FUUUUCK THIS!!!!....I'll just drive around with the fog lamps on.
I'm doing that now 😂😂😂
I've been doing this for months and since the fogs are in the headlight housing almost nobody notices my headlight is out
yo I swear I have been doing this ever since my light went out lmao. I got to put a light bulb in it now because inspection is due
lazy eye club!!
💀💀💀💀💀💀💀💀
hello I bought new light bulbs and when I turn on the lights the color are white how they suppose to look then they turn yellow. do u know what can be causing the issue ??
The bulbs you bought weren't the 6000k color temperature correct spec. Buy these:
www.amazon.com/gp/aw/d/B0771VZ353?psc=1&ref=ppx_pop_mob_b_asin_title
Can you replace the factory hid bulbs with led bulbs?
Not without some conversion kit, but why would you? This is probably one of the best if not the best HID lights setup on any vehicle out there.
Does the headlight assembly have to come out? It looked like there was room to get to it
I've had some comments over the years that it's possible to replace without removing the bumper. I have no idea how they did it. Even removing the splash shield doesn't provide enough working room. Don't forget, you have the cover over the bulb assembly. Nonetheless, you can give it a try. Hope it works out!
Just out of curiosity, will these HID lights drain my battery? Since they are more powerful?
I mean are you going to run the headlights with the car off? If you're engine is running your alternator is charging the battery
what bumper is that
Hey where did you get that front bumper I like you
hey man what r the lights that you bought for the car?
They're stock HIDs...
amzn.to/2JYNH4a
How to remove and replace the foglight housing on a 2004 acura mdx
Only the 05 to have the drl on as well as the headlamps?
EASIER METHOD:
I've done this job twice now on my 07 and wish someone had explained this to me. If you are just changing the bulbs, don't remove the bumper.
The driver's side can be done by removing the battery and battery tray. You can then reach right in there to twist off the cover, pull it out, and change the bulb.
The best way on the passenger's side is to remove the wheel and peel back the front half of the fender liner. This headlight has a T20 security screw that you need to remove. There is not one on the driver's side. Once you peel back the liner, you can get to the screw, remove the cover, and replace the bulb.
Having done this twice, I can do this in under an hour from the time I enter my garage to the time my tools are all put away. Should be no more than a 2 hour job your first time with this method.
thank you for this video saved me so much money!
hey bro my cars hid flicker on lika sharp turn do u think they are just loose
and is there a way of tightening them or naybe its a wiring problem
+kado alvarez Both sides?
+CarsNToys yes on both sides.! if i go and give them a good smack they will go out but wont come back unless i turn on the switch on the dash
Wow, what a mission. Thanks for this vid.
Yea, tell me about it. Interestingly enough, once you do it once it goes pretty quick.
this looks like a pain in the ass for a frigen light bulb
How do you aim the headlights? On a 04 acura tl?
Send me an email. I may have a diagram I can scan and email - carsntoyshelp@gmail.com
CarsNToys did you get me email?
What size tamper proof torx screw is needed ?
I don't remember the exact size but a cheap kit like this will do: amzn.to/2HXVUVo
Tamper proof T20
@@dmileshc8751 Thank you the job has long since been completed lol
what bumper is that?? its beautiful
+Brandon Dunklin Ron Jon.
Hopefully I can accomplish this when I get my headlight in the mail tomorrow.
Good luck! It's not a bad job. Just a little time consuming
I got a guy to do it at his shop I only paid 150, I wouldn't have been able to get the dent out of the fender to mount the light myself without fuckin something up! Im satisfied, but thanks for the video it was very informative! happy New Year brosky!
What's the kit?
Do you have to remove the bumper? What kind of engineering is this? If that is the case. I have an 05 rl and I hope I don't have to go through like this.
What is the size of that torx bit
Ryan Defer I believe it was t20
+CarsNToys thank you
Yeah I think this is wild as well when you can reach the bulbs from the top
What year car is this hes working on?
2005
What bulbs did you use
+heber enriquez Stock bulbs - Philips
+CarsNToys are they bright
TheZane03
Bright enough. Watch out for aftermarket. I've come across plenty of times an aftermarket bulb was used and it didn't last very long.
Wow you really need to take out the entire headlight to change the bulb? Well, I wanna delete my intake resonator and taking that bumper off kinda seems fun.
do u really need to take the bumper and headlight off, just to replace the bulb?
+mackenzie lao Unfortunately you do for this TL.
nice job my friend. very helpful
Thank you. Glad to help.
wow im looking at a TL to buy and I was thinkin oh ill get some new headlights and led bulbs like I do with most cars I own but wow this is the most complicated vehicle ever just to change A bulb , I almost don't wanna buy it now because of this hassel to do anything mechanical or cosmetic on this vehicle like why would they make it that complicated ?
this video stupid long makes me want to get rid of my tl
It's a decent size job.
Yall are cracking me up with the comments. If you aren't interested in taking a front bumper off then why in the heck did you decide to purchase a 270hp fancified accord type R? I'm sure your home entertainment system needed more work
Thankyou Much for a very detailed video on a simple fix. Like doing 2 oil changes, Maybe ?
Ijust need to replace the bulb , thnxz
Great Video
Alfredo Gomez Thanks man
CarsNToys you ever thought,about making a walk around video of the car? ive never seen a video of an acura with the ron jon kit and im sure a lot of people wanna see one to get a better idea what it looks like
Y’all doing too much. Just remove the battery and dig in there it’s a lot easier. It’s reachable on top, that’s what I did.
What about passenger side lol
Haven’t watched the vid yet with the first comment lol
Gotta have narrow hands though
My passenger side needs changed.. how do you recommend doing that? 🙃
Thank you.
Glad to help!
We got it thank you sweetie
Bro...... Why did you use the power tools on the last screw...lol
I know right lol lol 😅
My headlights drive me nuts so I put them in the oven @ 225 degrees, etc.. What a pain in the A$$ To get all the old Glue out of the groves so I could silicone them back together. I did that around 2015. Its 12:11am Now sat. Jan 5th 2019. Shabbat Shalom = Peace . Later , I am 10-7
As soon as he went under the car I already put it a return for the LEDs I just received.
IKR
I hope none of you actually do this, you can reach them from the top
What do you mean?
@@skyfalllegend3186 they must got the world's skinniest wrists. I got super thin wrists and can't get in there. At least on the driver's.
@Leonaire I ended up just taking the whole bumper off to get the cap back on. It's really not that hard it's all just the push clips and a few nuts
My last car was a 96 Nissan SE R. You could replace both bulbs, 9004 in 5 minutes. My TL. Lord help me.
lol..yes it's a different animal
I'm getting mine to sell it, the prices on parts and the work alone are not worth the hassle
Better: bulb without igniter goes in first, then the wire clips, then the igniter
part numbers please!
now I know why the guy at the repair shop charged me $140 to change my bulbs
+omegasapple Yea, it's all labor.
He for sure just took the battery out and got everything done without doing the bumper.
I took on the challenge
Wow. This seems like a ridiculous amount of work to change a headlight.
It is.
You really removed the whole bumper AND headlight for a bulb replacement?🤦🏽
Update: I did mines without removing the bumper....😎😎😎
Wow. I could never do that. How did you remove the security cover off the housing?
CarsNToys I just turned my wheel all the way to the left removed the wheel well and everything was exposed mines didn’t have a cap. So someone had that issue before and left it off. I removed the igniter, then pulled the clip that holds the light 💡 bulb one to the left and the other towards the right not just straight back and replaced everything. The hardest part was getting the light to stay in place when putting it back but eventually I got it and everything works.
If you use your fingers and brain it takes 10 min to change both from the top.
I can never fucking manage to reinstall my passenger side headlight cover. It comes off so easy and ive tried every fucking angle nothing works
they should come out with an easy way to change these bulbs.....cause the repair guys are just charging for labor
+Smith Gartey Absolutely. It's all labor.
put a day to the side. it's not that bad of a job to do at all.
I agree. Don't rush it.
I'll pay you to change mines
This is down right horrible!! I’m choosing to not drive my new TL at night until I can pay 1,000 for headlights.
well you dont have to do all that...
Dude, you don’t need to disassemble car just to change a bulb. Don’t scary people and don’t be stupid
I have a acura tl 2005 and took out the battery and you can get to the hid lights ! Wtf remove the hole bumper fuck that
don't need to remove the bumper ....... i guess more money to charge
Damn gotta take out the bumper for this!? I'll pass fuck that lol
Yea, fun stuff.
Maaan what the hell.... all that to change the headlight .... I would be pissed if I change one wide and then the other side goes out the next day
lol..funny enough once you do it once it's not all that bad. Unfortunately many modern vehicles require the same procedure. Crazy.
invest on some panel clip removers lol.
lol yea I definitely need a pair.
Why the fuck did he do all that work? Literally take out the battery and you can access the bulbs.