This was incredibly helpful! I bought this last summer and I had no idea how versatile it really was. I feel so stupid. BUT I love that you took the time to record a video on it! THANK YOU! THANK YOU! THANK YOU!
Thanks Leo and Alex. I just purchased this light and I’m excited to use it and get the effects of it. I would usually take 2 pars for small events and 2 moving heads got larger or formal events. But as you mentioned it’s going to save a ton of time.
Thank you so much for yet another highly informative video. You guys truly deserve so many more subscribers, as well as a brand partnership with a DJ equipment company. The level of detail you both go into, as well as your DJ knowledge, your Gig Logs, and thorough breakdowns of each piece of equipment you’ve shown, has led me to my final decision to purchase the EV Evolve 50s, selling my traditional PA speakers, and their lift and lower stands, as well as making a decision on which Dj pool makes the most sense to move forward with after dropping Digital DJ Pool, which lost most of their major label support last year. Heavy Hits made the most sense for me, and due to your great review of DJ pools, the features it lacked didn’t cause any disappointment for me, since you already listed its pros and cons very well.
THIS is the video that places that sell the Move should have that showcases its ability! One question for you: I am not a DJ. For parties at my house, I want a system like this that I can plug in, turn on, start the music and have it "react" to the music. I think you mentioned that this system has that capability, does it?
Thanks for watching. Yes you can spot like the entrance as long as the light is connected to a DMX controller. One thing I have noticed is that the moving heads tend to lose their "center" and their positioning starts to get off.
You did a really good job for a UA-cam video and you took the time I have a question I have a gid bar move and I don't no how to use the top lights for the lasers
Thanks for watching. This depends on how you are controlling the fixture. If you are using a DMX controller make sure you are selecting the correct Channel. Also make sure you have the light set up for DMX and the correct number of channels you are going to use. If you are using DMX software make sure you have the correct light selected. Again also make sure the light is set to the correct DMX channel and number of channels. Check your manual for how to do that.
Thank you so much Leo D and Alex, fantastic video! Thank you both for your time and detailed review, this is one of the best reviews I've seen! I'm starting out as an Elvis singer to backing tracks, do you think this light would be too much (overkill) for what I'm doing or would I be better off with The Chauvet Wash fx Hex lights? I will be singing in some clubs with a stage and also bars. Thanks guys, your help would be greatly appreciated! Kind regards,
Very cool. Thanks for watching. In my opinion, if you are going to highlight yourself then I would use wash lights. I feel that moving head lights, lasers, and Derby's are best to be pointed toward a dance floor and not at a performer. Good luck.
Great Vid. If you were going to use that as your main lights for a gig, where would you position them in relation to your DJ table? Would you have them off to one side, or does the stand have high enough reach to have them behind you, without your body blocking a lot of the lights to the dance floor? can see the potential to have one either side of you, because they link up.
Thanks for watching. Placement is a personal preference. I prefer to be off to the side and set up my speakers and lighting as close to the dance floor as possible. With that I would be ok placing this light in the middle of the two speakers or if you want to swing for two of them then one at by each speaker. I am not a fan of setting up lighting behind the DJ. I always feel that is just lighting the DJ.
Housemixer Leo D thanks, I ended up buying a gig bar 2, love it, think I’m going to buy a second and run one as slave and have them left and right of my booth and speakers
Are you talking about the 5:37 mark? At that point Alex was just controlling the light with the IRC controller. I think you have to set the light to accept the remote and then just choose the color on the remote. Thanks for Watching.
I very much like this but I need it for patriotic holidays. Can you get something like this in red white and blue? Or can you make this thing do only red and blue and eliminate the yellow green and purple?
Thanks for watching. The laser cannot do specific color combinations only those that are programmed. You can do Solid Colors or all Colors mixed. What you could do is get creative and as long as your budget works for this. You can get three of these lights and make each on do a specific color. Set one to Red, another to White, and the last one to Blue.
@@lman2677 Sorry, I thought you were commenting on a different video about a different light. Yes, on the Gigbar Move if you connect a DMX controller to it (Hardware or Software) you can control what colors are displayed on the Moving Heads, Derbies, and Pars. So you can do any combination you like. With a DMX controller you can control each section independently.
Thanks for the video, very informative. One question, the manual has setting for speed (0-99), does this setting control the speed of the moving heads, or all the lights (strobes frequency....etc)?
Appreciate the informative video you got a subscriber. I'm s club DJ and I'm just coming to the wedding side and was looking for some light recommendation for a newbie. Do you happen to have a wireless mic recommendation mid-range price?
Thanks for watching. I use Shure mics, around the 600 dollar range. You want to make sure you can control what frequency and channel you are going to use. This will help in venues where there is already some PA installed or another DJ is close to you. Plus many of the systems in this range give you the ability to upgrade the antenna's that they use. This helps with range.
Yes as long as you are controlling the light with some type of DMX controller (Hardware or Software). The moving heads are not the most accurate. We have noticed that over time they tend to drift off center. Also they don't have a good stepper motor so their movements are very ridged. Thanks for watching.
Thanks for watching. I use an American DJ Fog Fury 2000 and I use the ADJ Premium Fog Juice. The fog is water based and should be safe for most smoke alarms. But you should always check with the venues first. They should know if it won't be a problem. Just mention that the smoke is water based.
When we recorded this video, we did use a fogger. Definitely need something in the atmosphere so you can see the beams. Otherwise, the light is good. Fog is just as good a haze, the difference is the delivery.
Good question. Alex, the owner of the light in the video, has moved on from this light to some larger wash lights and larger moving heads. Like most things I feel everything has a place. This is a good entry level light. But as you progress into bigger and better things it just makes sense to get the "best of breed" in wash and moving head lights. If I were just starting from scratch without any light effects I might consider getting into this unit. Thanks for watching.
Can you have the strobe turned OFF in every mode??? Ie: in MUSIC & AUTO modes so it wont cycle into strobe?? I will be running it as a "Stand Alone" with NO DMX....but need to have NO Strobing! Most of the clubs i play at dont allow Strobs.
Without a DMX controller you are at the mercy of the internal programs and I believe all the internal programs include all the lights. Thanks for watching.
@@Housemix10 si es buena idea compre el my dmxgo porque tengo 4 inno pocket spot pero la verdad el sistema dmx en general se me hace muy complejo y complicado. Saludos .
Thanks for watching. I feel the beams are bright enough to handle a small to medium sized party. For me that would be anywhere between 0 and 100 people. Not sure what you mean by "does it also angle?"
The controls in the back of the light allow you to turn on the lasers. Also if you connect the light to a DMZ controller you can control when the lasers turn on. If you can't turn on the lasers from the controls on the back I would think your light has a defect. Good luck.
I already own the 2 of the par gig bar one and I just bought the gig bar 2 last yr I was thing of buying the set of 2 moving heads that go under your speaker one for each speaker and buy 2 of the gig bar move
Thanks for watching. I am going to say you will need to do some more research on this one. I don't have My DMXGo but I would say that it has a lot of preset features for specific ADJ fixtures. Since this is a Chauvet light I would think it might work but some features will not work as expected. Good luck.
This is an entry level lightshow. Not very bright and not really DMX friendly. It is a very simple light package. I think you would be better off designing your own lightbar with a could of wash lights and some brighter moving heads.
Agreed. Thanks for watching. Everything has a place and clearly this is a unit that is simple and easy to set up. But if you want control, yes build your own with best of breed lighting.
Nothing more annoying then seeing a dj use these lights in music mode while a slow song is playing. Definitely take the time to learn Dmx it’s so worth it.
Hmm, I thought I would have put that in the video but I guess I did not. #1 Shawn Mendes and Camila Cabello x Robbie Mendez - Senorita (Fire Reboot). #2 Kurtis Mantronik - Get Down (Hands High Remix)
Love how you guys get into detail. It's nice to see what it can do. Especially for the price. Thanks for the upload.
Thanks for watching
Awesome video guys, thank you for taking the time to make this for everyone in the DJ Community.
Thanks for watching
Alex the cool thing with the Chauvet pole. Open the legs a bit wider. Puts the total hieght at just under 10'. I got the gig bar 2.
Thanks for watching
Great video looking forward to your future videos
Thanks for watching
This was incredibly helpful! I bought this last summer and I had no idea how versatile it really was. I feel so stupid. BUT I love that you took the time to record a video on it! THANK YOU! THANK YOU! THANK YOU!
Thank you for watching
Wow! These lights are nice
Thanks for watching
Great video. Thank you for posting.
Thanks for watching
Good Stuff. Looks a lot brighter and sharper than I imagined.
Thanks for watching
Great light show, best I've seen on gigbar move!
Thanks for watching
Great great video. The one I needed to see. cheers
Thanks for watching
Thanks Leo and Alex. I just purchased this light and I’m excited to use it and get the effects of it. I would usually take 2 pars for small events and 2 moving heads got larger or formal events. But as you mentioned it’s going to save a ton of time.
Thanks for watching. Enjoy.
I usually sell my services in packages. this seems perfect for a "small package" fixture. thank you.
Thanks for Watching
Thank you so much for yet another highly informative video. You guys truly deserve so many more subscribers, as well as a brand partnership with a DJ equipment company. The level of detail you both go into, as well as your DJ knowledge, your Gig Logs, and thorough breakdowns of each piece of equipment you’ve shown, has led me to my final decision to purchase the EV Evolve 50s, selling my traditional PA speakers, and their lift and lower stands, as well as making a decision on which Dj pool makes the most sense to move forward with after dropping Digital DJ Pool, which lost most of their major label support last year. Heavy Hits made the most sense for me, and due to your great review of DJ pools, the features it lacked didn’t cause any disappointment for me, since you already listed its pros and cons very well.
We appreciate the kind words. Thanks for watching and please share a link to our video's where ever you can.
Awesome video guys....im sold im buying one for my 1st lighting jawhn!!!
Thanks for watching
Awesome video! I just picked this up and I can’t wait to gig with it!!
Nice, thanks for watching
Tremendous tutorial. Detailed yet easily understandable. Thank you.
Thanks for watching
THIS is the video that places that sell the Move should have that showcases its ability! One question for you: I am not a DJ. For parties at my house, I want a system like this that I can plug in, turn on, start the music and have it "react" to the music. I think you mentioned that this system has that capability, does it?
Thank you very much. Please share the Vid. Yes the light has a sound active mode that will run through some preset scenes using all the lights.
Thanks for the fully comprehensive review, I’ve just ordered one off the back of this!
Nice, thanks for watching
Great video..just subbed... have the gigbar 2...love it for portability...this may be next.
Thanks for watching
Stack it high and let it fly!
Cool
Now this is a real review of the gig bar move i am sold to get them I got the same dmx controller u got
Thanks for watching. I am glad the video helped.
nice review and music selections !
Thanks for watching
excellent video i really like the move i think its an great all in one solution and it has great coverage. thanks for the video guys.
Thanks for watching
Just come across your vid, very good BTW, but can you tell me if the Moving heads can act as a spot light also?
With Thanks
Thanks for watching. Yes if you connect this light up to a DMX controller you can control the Moving heads and make them act like Spot Lights.
Great video I got a lot out of it. My first lights to attempt to control so I will be looking for more..
Good luck, thanks for watching
Pretty good my a**. It’s bad to the bone. I own a full lighting rig. This is the backyard party light of the year!
Ha ha, ok. Thanks for watching.
Can you spotlight the entrance with those moving heads. Are they bright enough?
Thanks for watching. Yes you can spot like the entrance as long as the light is connected to a DMX controller. One thing I have noticed is that the moving heads tend to lose their "center" and their positioning starts to get off.
Huge Thanks Leo
You did a really good job for a UA-cam video and you took the time I have a question I have a gid bar move and I don't no how to use the top lights for the lasers
Thanks for watching. This depends on how you are controlling the fixture. If you are using a DMX controller make sure you are selecting the correct Channel. Also make sure you have the light set up for DMX and the correct number of channels you are going to use. If you are using DMX software make sure you have the correct light selected. Again also make sure the light is set to the correct DMX channel and number of channels. Check your manual for how to do that.
Great review! Looks like a great all in one system.
Thanks for watching, yeah I was impressed. It is a good starting point for lighting.
👍 thank you for this.
What type of DMX Software is this? Do you suggest show x press? And what type of interface do you need to hook the gig bar move to the computer?
Thank you so much Leo D and Alex, fantastic video! Thank you both for your time and detailed review, this is one of the best reviews I've seen!
I'm starting out as an Elvis singer to backing tracks, do you think this light would be too much (overkill) for what I'm doing or would I be better off with The Chauvet Wash fx Hex lights? I will be singing in some clubs with a stage and also bars. Thanks guys, your help would be greatly appreciated!
Kind regards,
Very cool. Thanks for watching. In my opinion, if you are going to highlight yourself then I would use wash lights. I feel that moving head lights, lasers, and Derby's are best to be pointed toward a dance floor and not at a performer. Good luck.
@@Housemix10 Thank you Leo D for your reply, very much appreciated!
Nice job guys!
Thanks for watching
Great Vid. If you were going to use that as your main lights for a gig, where would you position them in relation to your DJ table? Would you have them off to one side, or does the stand have high enough reach to have them behind you, without your body blocking a lot of the lights to the dance floor? can see the potential to have one either side of you, because they link up.
Thanks for watching. Placement is a personal preference. I prefer to be off to the side and set up my speakers and lighting as close to the dance floor as possible. With that I would be ok placing this light in the middle of the two speakers or if you want to swing for two of them then one at by each speaker. I am not a fan of setting up lighting behind the DJ. I always feel that is just lighting the DJ.
Housemixer Leo D thanks, I ended up buying a gig bar 2, love it, think I’m going to buy a second and run one as slave and have them left and right of my booth and speakers
What the name of that remix you were using for this ?
It's designed for wedding DJs and wedding photographers HATE it! 🙂
Ok. Thanks for watching.
Idk if you found the profile yet but I did. All you have to do is update the profiles within the mydmx 3.0
Very cool. Thanks for the update.
Can you tell how you guys got the gigbar in static mode at the beginning of your video. TIA
Are you talking about the 5:37 mark? At that point Alex was just controlling the light with the IRC controller. I think you have to set the light to accept the remote and then just choose the color on the remote. Thanks for Watching.
Great video!!! I ordered 2!!!
Great, thanks for watching
I very much like this but I need it for patriotic holidays. Can you get something like this in red white and blue? Or can you make this thing do only red and blue and eliminate the yellow green and purple?
Thanks for watching. The laser cannot do specific color combinations only those that are programmed. You can do Solid Colors or all Colors mixed. What you could do is get creative and as long as your budget works for this. You can get three of these lights and make each on do a specific color. Set one to Red, another to White, and the last one to Blue.
@@Housemix10 can I set the laser to red, the strobes to white and the Pars to blue, and make the derbys blue and red?
@@lman2677 Sorry, I thought you were commenting on a different video about a different light. Yes, on the Gigbar Move if you connect a DMX controller to it (Hardware or Software) you can control what colors are displayed on the Moving Heads, Derbies, and Pars. So you can do any combination you like. With a DMX controller you can control each section independently.
Would have been great if the light was shown without fog as not all venues permit the use of haze/fog.
Thanks for watching. Not much of a show without showing the body of the light itself.
Dope!💯
Thanks for watching
Thanks for the video, very informative. One question, the manual has setting for speed (0-99), does this setting control the speed of the moving heads, or all the lights (strobes frequency....etc)?
The speed setting only controls the Strobe effect. Thanks for watching.
For the price the routing head should of been at least 30 watts...but 10 watts good for small room...
Thanks for watching
Appreciate the informative video you got a subscriber. I'm s club DJ and I'm just coming to the wedding side and was looking for some light recommendation for a newbie. Do you happen to have a wireless mic recommendation mid-range price?
Thanks for watching. I use Shure mics, around the 600 dollar range. You want to make sure you can control what frequency and channel you are going to use. This will help in venues where there is already some PA installed or another DJ is close to you. Plus many of the systems in this range give you the ability to upgrade the antenna's that they use. This helps with range.
Are you able to aim the moving heads to use in a band gig where you can follow the singer around the stage?
Yes as long as you are controlling the light with some type of DMX controller (Hardware or Software). The moving heads are not the most accurate. We have noticed that over time they tend to drift off center. Also they don't have a good stepper motor so their movements are very ridged. Thanks for watching.
really cool awesome information !
I'm looking to get one and do you know if it can be sync to the gig bar 1?
Everything we have found only mentions the Gig Bar 2. So I can't tell you if it will Master/Slave link with the Gig Bar 1.
Great video.. what or where can you get price? How much is this unit?
I think you can just look it up at the sites you normally buy from.
good video greetings guys
Thanks for watching
Question! Does the remote comes with it? I’m asking because I went to a few sites & they said add remote 29.99
Hey Thanks for watching. I just checked with Alex and he said that yes the small IRC remote does come with the light.
Awesome!!! Thanks man. Cool tutorial 💪🏾 Just order mine today
I bought this, curious to find out what you use for the haze.. and is ask if it’s ok for venues, smoke alarms ?
Thanks for watching. I use an American DJ Fog Fury 2000 and I use the ADJ Premium Fog Juice. The fog is water based and should be safe for most smoke alarms. But you should always check with the venues first. They should know if it won't be a problem. Just mention that the smoke is water based.
Did you use a hazer or fog to get the full effect? Or haze spray? If you can’t afford a hazer lol
When we recorded this video, we did use a fogger. Definitely need something in the atmosphere so you can see the beams. Otherwise, the light is good. Fog is just as good a haze, the difference is the delivery.
SWEET =)
Thanks for watching
Hi guys, I have a question. How did you get the moving heads to chase each other at 8:33 in the video. I’ve not managed to work this out yet
Thanks for watching. Alex explains it shortly after. He was running through the Light Menu and changing the settings on the moving heads.
What speed you have the moving heads
At what point? If you see the moving heads moving slow it is when it was connected to the DMX software. Thanks for watching.
So its been almost a year since this review- curious if today you would still recommend the GigBar Move? Was it a good purchase?
Good question. Alex, the owner of the light in the video, has moved on from this light to some larger wash lights and larger moving heads. Like most things I feel everything has a place. This is a good entry level light. But as you progress into bigger and better things it just makes sense to get the "best of breed" in wash and moving head lights. If I were just starting from scratch without any light effects I might consider getting into this unit. Thanks for watching.
How much that all including lights etc...
Thanks for watching. Please check with your retail outlet for pricing.
Can you have the strobe turned OFF in every mode??? Ie: in MUSIC & AUTO modes so it wont cycle into strobe?? I will be running it as a "Stand Alone" with NO DMX....but need to have NO Strobing! Most of the clubs i play at dont allow Strobs.
Without a DMX controller you are at the mercy of the internal programs and I believe all the internal programs include all the lights. Thanks for watching.
Me gusta mucho yo tengo la gigbar 2 pero estoy pensando en venderla y comprarme esta x q es mas completa saludos amogos y gracias....
Gracias por ver el video. Usa los dos juntos, y con un Sistema de DMX. Te va gustar
@@Housemix10 si es buena idea compre el my dmxgo porque tengo 4 inno pocket spot pero la verdad el sistema dmx en general se me hace muy complejo y complicado. Saludos .
@@juliogalindo5314 Para usar los Sistema's de DMX solo necesitas practica. Como todo empieza con una luz y aprende que puedes hacer. Te lo recomiendo.
What did you use to connect it to DMX?
For this video we used ADJ My DMX 3.0 Thanks for watching
How far does it reach? Does it also angle???
Thanks for watching. I feel the beams are bright enough to handle a small to medium sized party. For me that would be anywhere between 0 and 100 people. Not sure what you mean by "does it also angle?"
What is the latest software version for this unit
Are you asking about the Gigbar Move? I don't think that this unit has the ability to have any firmware updated.
also try using the myDMX GO app to control your lights
Thanks. Thanks for watching
It's GARBAGE
How did you turn on the laser? I have bought the same lights, but i dont know how to power up laser.
The controls in the back of the light allow you to turn on the lasers. Also if you connect the light to a DMZ controller you can control when the lasers turn on. If you can't turn on the lasers from the controls on the back I would think your light has a defect. Good luck.
I already own the 2 of the par gig bar one and I just bought the gig bar 2 last yr I was thing of buying the set of 2 moving heads that go under your speaker one for each speaker and buy 2 of the gig bar move
Very cool
Can my dmxgo control this lights?
Thanks for watching. I am going to say you will need to do some more research on this one. I don't have My DMXGo but I would say that it has a lot of preset features for specific ADJ fixtures. Since this is a Chauvet light I would think it might work but some features will not work as expected. Good luck.
I don't care for them, its like the beer sampler from BJ's Brewhouse---not enough, but just a taste
Thanks for watching
How much?
I am not selling them but you can find them for around $279 USD. Thanks for watching.
And on auto which mix you have it on
That was Mix 2 which is the 1 i like the most. Thanks for watching
DEEJAY BIG AL what speed you have the moving heads
DEEJAY BIG AL what speed you had the heads
@@jesustirado743 those are just on the default what ever it is not ideal for first dance but good to go once party starts
whats the lowest price this is going for
Shop it around but I seem to always see it for 799 USD.
This is an entry level lightshow. Not very bright and not really DMX friendly. It is a very simple light package. I think you would be better off designing your own lightbar with a could of wash lights and some brighter moving heads.
Agreed. Thanks for watching. Everything has a place and clearly this is a unit that is simple and easy to set up. But if you want control, yes build your own with best of breed lighting.
Floss 😂😂😂
Thanks for watching
Dam I need to learn how to use the gig bar 2. I literally plug it in and put it to music mode lol
It is a good unit, even better if you connect it to some DMX software.
Nothing more annoying then seeing a dj use these lights in music mode while a slow song is playing. Definitely take the time to learn Dmx it’s so worth it.
it is rubbish
Ok, thanks for watching.
worst light I ever bought
what are the tracks used in the video please?
Hmm, I thought I would have put that in the video but I guess I did not. #1 Shawn Mendes and Camila Cabello x Robbie Mendez - Senorita (Fire Reboot). #2 Kurtis Mantronik - Get Down (Hands High Remix)