How to Cut Magic Flock Rhinestone Template Material with the Silhouette CAMEO

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 58

  • @jdsavage7824
    @jdsavage7824 3 роки тому +5

    You are such a natural at explaining things. Learned so much just from watching this video alone. Thank you!

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  3 роки тому

      Glad it was helpful! We are here to help. If you have any questions, please let us know. -TRW Tanyu

  • @taniaparks939
    @taniaparks939 11 місяців тому

    Thanks for this video. No matter what I do none of the holes stick on the paper. I followed the directions exactly. Do you have any recommendations?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  11 місяців тому

      Every machine is a touch different. It will take some trial and error with test cutting as there's no "set number" that will work across the board. Here's our chart to try out and adjust / test cut. We also really like to peel the flock and place it directly onto our mat. It won't agressively stick, don't worry. Here's a video showing how to test cut until you find that sweet spot: ua-cam.com/video/3wRE-u8NINU/v-deo.html
      -TRW Crystal

  • @shellyjones7131
    @shellyjones7131 6 років тому +3

    Thank you so much for showing how to cut the magic flock. Could you also show how to do it with one of the TRW downloads like your recent life is a beach or even the TRW monogram templates.

  • @lorrainestrong3047
    @lorrainestrong3047 6 років тому +5

    Thank you so much for such a great video. Can you someday do a video on designing in Silhouette using rhinestones? I would love that. Thank you again.

  • @lakeshamoniqueofsubroidery7413
    @lakeshamoniqueofsubroidery7413 2 роки тому

    Hi, I love this video, you have showed me a lot, but I would like to know, to cut the flock do I need to use a different blade? I only have the autoblade my cameo 3 came with and I read somewhere that its good for cardstock but it didn't say anything about magic flock. Should I use a Rachett blade to cut the flock?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  2 роки тому

      This video goes very in depth with quite a few materials. :-)
      ua-cam.com/video/3wRE-u8NINU/v-deo.html
      -TRW Crystal

  • @CarolSuesCreations
    @CarolSuesCreations Рік тому

    Thank you do you have recommendation setting for brother dx125?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  Рік тому

      Sorry, we don't have the Brother machines, so we don't have cut specs for those. But, you can join our Crafting with Rhinestones and Vinyl page on Facebook and ask in there if anyone has that Brother and what cut specs they use. facebook.com/groups/592565454142124 -TRW Pilar

  • @RosemaryJen
    @RosemaryJen 6 років тому +1

    Thanks, I would like to see the 2nd part what you do with the Rhinestone. A dumb question you can still do the same thing in the regular version of the cameo silhouette software. I would also like to see how you can convert an image or set an image to cut on magic flock rhinestone.

    • @RosemaryJen
      @RosemaryJen 6 років тому

      Never mind I just saw your rhinestone decal video and you answer my questions In that video. Thanks

  • @TonysTshirtsandKreativeKim
    @TonysTshirtsandKreativeKim 6 років тому +2

    Thanks, I have been experiencing issues with my flock. It was not releasing the holes after cut. I am going to try this.

    • @str8_flashtv584
      @str8_flashtv584 4 роки тому +1

      I’m going through the same thing as we speak don’t know why it’s not working I’m getting frustrated

  • @Elfkayz7247
    @Elfkayz7247 2 роки тому

    Hello, thanks for the video. Am new with silhouette and I just bought silhouette cameo 4. Can I used the Autoblade that came with my cameo 4 to cut magic flock and holographic htv ?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  2 роки тому

      Hello! Yes, you can. For Magic Flock these are the cut settings we recommend:
      Blade Depth: 6
      Force: 30
      Speed: 10
      Passes: 2
      and for Holographic:
      Blade Depth: 1
      Force: 10
      Speed: 5
      Passes: 1
      Be sure to test cut with these settings first though just to be safe! :)

  • @eriellawson
    @eriellawson 3 роки тому

    Is the documentation option on the website no longer available?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  3 роки тому

      Hey there! You can find the recommended cut settings under Resources > FAQ now. 😊
      - TRW Haley

  • @steffanierion
    @steffanierion 6 років тому +1

    Do you have any idea why the silhouette cameo may not be double cutting ALL of the circles but only every once in a while?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  6 років тому

      Sometimes that happens with a software issue. Make sure your software is updated and your machine has the firmware updated as well. :) - TRW Lisa

  • @geminidream4347
    @geminidream4347 2 роки тому

    Could you please update a link for 2020 on where to find these documentation sheets since there is no support tab anymore? Thank you

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  2 роки тому +1

      For cut specs? Those are moved to here:
      therhinestoneworld.com/ColorSpark-Vinyl-Recommended-Cut-Settings-_b_143.html
      AND, here's a better video to demonstrate test cutting more in depth:
      ua-cam.com/video/3wRE-u8NINU/v-deo.html
      *Did you know?
      We're live every Monday night at 8pmEST on our UA-cam channel!
      We teach how to use our products, have some pretty awesome giveaways (Even Cameos!), and if you hit subscribe (free!), it will open up the chat option during the live. You can hang out, ask questions and have fun as we go!
      We also offer tiers of paid monthly subscriptions that have a variety of perks, sneak peeks, extra training, free designs and fonts depending on the tier level selected!
      -TRW Crystal

    • @geminidream4347
      @geminidream4347 2 роки тому

      @@TheRhinestoneWorld You guys ROCK!!! Thank you so much for the links. And thanks for caring like you do for your followers and customers. Please never change this!

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  2 роки тому +1

      We appreciate the love!! Thank you!! :-) -TRW Crystal

  • @anajohnson6843
    @anajohnson6843 3 роки тому +1

    What blade do I use for cameo 4 to cut the flock?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  3 роки тому

      You can use either an autoblade, Deep Cut blade, or CB09 with a Graphtec adapter!
      -TRW Bri

  • @neylasol5950
    @neylasol5950 3 роки тому

    Thank you will try it ASAP my last cut didn’t work at all

  • @MyTnb
    @MyTnb 6 років тому +1

    Great video- can you do a video on how you store all of the reusable templates you cut out? I haven’t been able to find any information

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  3 роки тому +1

      Hi there! Sorry for the delay in responding! We have a new team and are now able to answer questions much more quickly. We like to store our cut templates on the back of the Acrylic hotfix tape...that white bumpy plastic protective sheet. Then store them in clear page protectors in 3 ring binders. For really big templates, I bought an Art Binder, which is about 25" tall. Let us know if you have other questions. Thanks! -TRW Pilar

  • @sheriann512
    @sheriann512 4 роки тому

    Great video! If I am listening to several videos, I need to have flocked paper as well as rhinestone heat transfer paper?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  3 роки тому

      Hi there! Sorry for the delay in responding! We have a new team and are now able to answer questions much more quickly. The Flocked material is our Magic Flock template material..this is what you'll cut the design in to. The tape you'll use to lift your design is called Acrylic Rhinestone Hotfix Tape and yes, you'll need both materials. Let us know if you have other questions! -TRW Pilar

  • @paigesmith6898
    @paigesmith6898 6 років тому

    Do you have a video on how to tweak your cut setting. I get speed, but am never sure whether to adjust blade depth or pressure. In other words, if the suggested cut settings aren't working for me, what do i adjust first?

    • @Bikinibee
      @Bikinibee 5 років тому

      Took me 3 hours to calibrate mine and a waste of material. I couldn't get mine to not cut through the backing.

  • @bigvinyldreams9462
    @bigvinyldreams9462 2 роки тому

    thank you for all the training- i still need help
    i’m using a graphtec blade in my cameo 4 but had the same issue with my ratchet blade- i can’t get the dots to fully release- they remain stuck just a bit at the the top of circles. what setting would you suggest i adjust? i’ve been playing with them with little success except starting to see the cut hitting the backing

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  2 роки тому +1

      What software are you using? If using Silhouette, then try the overcut feature :-) -TRW Crystal

  • @eileenhotoph9129
    @eileenhotoph9129 6 років тому

    Thank you Lisa, going to cut one of the softball designs this evening

  • @jessiegibson9023
    @jessiegibson9023 6 років тому +1

    Another great video Lisa thanks

  • @robinjackson2034
    @robinjackson2034 6 років тому +1

    Thank you so much for this video! I'm so nervous to work with rhinestones on my cameo 3.

  • @cleme2558
    @cleme2558 6 років тому

    Thank you for all your lessons

  • @paperlady1513
    @paperlady1513 5 років тому

    Thanks Lisa! Your videos are alway great to watch.

  • @curls_off3064
    @curls_off3064 7 місяців тому

    Can you do it with a iPad ?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  7 місяців тому +1

      Here's a quick iPad video!
      ua-cam.com/video/-8TCBVnSnfs/v-deo.html
      .
      .
      Sign up for emails, and stay up to date on Free Live Trainings and Sales here: lp.constantcontactpages.com/su/p1fq54w/TRWdeals
      -TRW Crystal

    • @curls_off3064
      @curls_off3064 7 місяців тому

      @@TheRhinestoneWorld thank you

  • @Ruffle.Flares
    @Ruffle.Flares 4 роки тому

    Why is it not allowing me to cut on my graphtec ce6000-40 ?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  4 роки тому

      If you're having any issues cutting you can certainly email us or call us so we can figure out and help as to why your cutter is not working. info@therhinestoneworld.com or 941-755-1696
      Thanks for watching!
      - TRW Bobbi

  • @romeshkumar5432
    @romeshkumar5432 3 роки тому

    What's name of this stone?

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  3 роки тому

      She didn't actually use any rhinestones in this video. This material is our Magic Flock Template material. We carry two grades of hotfix stones on our website: Korean Low Lead and our premium Diamond Cut hotfix rhinestones. Let us know if you have other questions! Thanks, -TRW Pilar

  • @Amocreardesigns
    @Amocreardesigns 2 роки тому

    because my cameo is cutting ovals instead of circles with this material it wasn't like that before

    • @TheRhinestoneWorld
      @TheRhinestoneWorld  2 роки тому

      Ungroup, release compound path, and get all of the circles individual. Select them all and if you're using Sil Biz Edition, then at the top change the H and W to 0.135 then lock it. Generally ovals happen because a design with stones cannot be sized with the selection box vertically or horizontally, it'll skew.
      -TRW Crystal
      ******Did you know?
      We're live EVERY Monday night at 8pmEST on our UA-cam channel!
      We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. You can hang out, ask questions and have fun as we go!
      We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs, dibs on new products, extra coupons, and fonts depending on the tier level selected!

  • @HeisHeavenly2me
    @HeisHeavenly2me 6 років тому

    Thank you for all your help!

  • @amyrobinette3564
    @amyrobinette3564 6 років тому

    Thanks for the video

  • @ryansmith9081
    @ryansmith9081 6 років тому

    Thanks Lisa

  • @vernillthompson2420
    @vernillthompson2420 6 років тому

    great job one again

  • @NyaLuxeSews
    @NyaLuxeSews 6 років тому

    Thank you so much!!!!

  • @dbruce5760
    @dbruce5760 6 років тому

    Thanks!

  • @kreationkollect
    @kreationkollect 3 роки тому

    :o)