You’re like the only person on the planet making (modern) Mazda repair videos. You’re awesome for that. I have a 2022 Cx30 and just had the coolant valve thingy replaced like you had in your videos. P1026 or whatever it was. Under wsrranty but still worry that this one will go bad. Thanks for having the video on that too it was awesome to see what went wrong
Thanks for this video , my girl 21 mazda 3 turbo was getting this message. She took it to pep boys to get an inspection, told her the brakes are at half life and don't need to be replaced just yet . Everything else was fine , apparently. Came up this morning again when she was on her way to work expect it was flashing so she got nervous and pulled over to call off and come back home. I ended checking the reservoir because of the video and sure enough the brake fluid was low. Filled it enough pass the min and the light came off . Test drove around, car brake pressure was a lot more responsive and light never came on , thanks 😊
Really appreciated your explanations on every videos that you posted on Very informative and helpful to DIY guy like myself and others. Because I have both 3 and cx5 😂 You got a new subscriber Thanks
Hey Cardiac Plays, I need help,, I have a 2015 CX 5, 2.0. AUTOMATIC WITH MANUAL SHIFT. When I shift from park to drive and release the brake the transmission takes about 3 - 4 seconds to engage properly. Usually it should move as soon as you shift to drive. The transmission delays, so if go on the gas and the TRANSMISSION kicks IN late the car will jump suddenly. DANGEROUS. I HAVE TO WAIT FOR THE TRANSMISSION TO ENGAGE, THEN GO ON THE GAS. THANNKS MA N
@@KillaninjaFC Your not kidding bro. I've done like 6 recalls on some CX-90s all for software updates. Im just waiting for a customer to complain about the suspension noise.
You’re like the only person on the planet making (modern) Mazda repair videos. You’re awesome for that.
I have a 2022 Cx30 and just had the coolant valve thingy replaced like you had in your videos. P1026 or whatever it was. Under wsrranty but still worry that this one will go bad.
Thanks for having the video on that too it was awesome to see what went wrong
Thanks for this video , my girl 21 mazda 3 turbo was getting this message. She took it to pep boys to get an inspection, told her the brakes are at half life and don't need to be replaced just yet . Everything else was fine , apparently. Came up this morning again when she was on her way to work expect it was flashing so she got nervous and pulled over to call off and come back home. I ended checking the reservoir because of the video and sure enough the brake fluid was low. Filled it enough pass the min and the light came off . Test drove around, car brake pressure was a lot more responsive and light never came on , thanks 😊
Hey Cardiac, the best automotive video I've seen on UA-cam is the Mazda CX-5 coolant valve replacement. I have a 2015 CX-5
I have a 2018 & 2024 Mazda CX-5. I'm glad I came across your videos.
Really appreciated your explanations on every videos that you posted on Very informative and helpful to DIY guy like myself and others. Because I have both 3 and cx5 😂
You got a new subscriber Thanks
Nice Video... Any ball park figure what the cost may be like to replace the entire cylinder? Thanks
Its about $150 Canadian (RockAuto)
If you do end up replacing the master cylinder, you should definitely make a video on the install.
Can you do fuel level sensor replacement cardiax that’ll help me a ton right about now
Hey Cardiac Plays, I need help,, I have a 2015 CX 5, 2.0. AUTOMATIC WITH MANUAL SHIFT. When I shift from park to drive and release the brake the transmission takes about 3 - 4 seconds to engage properly. Usually it should move as soon as you shift to drive. The transmission delays, so if go on the gas and the TRANSMISSION kicks IN late the car will jump suddenly. DANGEROUS. I HAVE TO WAIT FOR THE TRANSMISSION TO ENGAGE, THEN GO ON THE GAS. THANNKS MA N
I need help on Mazda Smart break system malfunction and Forward Smart City break support malfunction while traction sign is on and parking no sign.
Would love to see some CX-90/70 repair video examples if you're allowed to post them
OK. Ill record one once one comes in with problems. Ive only worked on one CX-90 so far. Front differential seal was leaking.
@@CARDIAXPLAYS There are going to be plenty of TSBs coming your way! Especially front suspension and rear bump stop grease...
@@KillaninjaFC Your not kidding bro. I've done like 6 recalls on some CX-90s all for software updates. Im just waiting for a customer to complain about the suspension noise.
Thanks Bro!!!
Would it cause any issues if you leave it unplugged so the messages dont keep popping up?
No. It will not cause an issue. I would probably just put some electrical tape over the connector to keep the elements out.
My 2021 is giving e brake malfunction, maybe every other time i start the car. Have to restart the car to clear it.
Hey man where you location in Texas? I want some work on on my MAzda 3