2006 YAMAHA BRUIN 350 4X4 STATOR INSTALL 04-18-2022

Поділитися
Вставка
  • Опубліковано 15 вер 2024
  • HOW TO INSTALL A STATOR ON A 2006 YAMAHA BRUIN 350 4X4 AUTOMATIC 04-18-2022
    thank you for watching and please subscribe to our channel
  • Фільми й анімація

КОМЕНТАРІ • 13

  • @zeroto3008
    @zeroto3008 2 роки тому +1

    Was laughing though the whole video, your attitude matches mine lol.
    Just ordered a stator from Amazon for my bruin 350, will attempt this weekend.

    • @CobraHMAgarage
      @CobraHMAgarage  2 роки тому

      Good luck. It wasn’t to bad at all. Just sucks when people mess up ur thread and then bolts are permanently unable to go back in smoothly. Hope this video has helped yah.

  • @adamgibson-t4k
    @adamgibson-t4k 9 днів тому

    How did you get the screws out in the end ? They are really soft.

  • @steventx77
    @steventx77 10 місяців тому

    Does the stator have to be clocked a certain way? I see multiple holes for the screws to fit in.

    • @CobraHMAgarage
      @CobraHMAgarage  10 місяців тому

      U just have to put it in same position u took it off. It really only goes one way cause the wire has to be in that same position and u can’t put all the wire inside the casing anyways.

  • @SrtNano-mb3xl
    @SrtNano-mb3xl Рік тому

    Bike won’t start after stator replacement . Any ideas ?

    • @CobraHMAgarage
      @CobraHMAgarage  Рік тому

      If it is still not cranking over try installing the cheapest on this list
      Starter solenoid
      Spark plug
      Spark plug wire
      Starters
      Battery

  • @MrRipper04
    @MrRipper04 4 місяці тому

    Did this bike have no spark??

    • @CobraHMAgarage
      @CobraHMAgarage  4 місяці тому +1

      Yes it had spark, I replaced starter, spark plug, spark plug wire and also starter solenoid and it would never start, so I installed the stator and she started right up

    • @MrRipper04
      @MrRipper04 4 місяці тому

      We did plug wire, plug, CDI box, checked fuses. Etc. doing this next. Never had charging issues or cranking issues. Just no spark

  • @christopherlee8362
    @christopherlee8362 Рік тому

    What's the screw specs for the stator itself?

    • @CobraHMAgarage
      @CobraHMAgarage  Рік тому

      I am not sure, I did it a while ago and I don’t remember what screw specs were. I did go to a hardware store and went through everything until I found what I needed.