Thank you SO much for this little video. There isn’t much practical tidbits like this that are easy to understand for nonpro divers out there like me. Please do more.
Thanks for the quick diagnose videos, actually saw both of them happen while diving already, rising IP and leaking HP o rings in the SPG. Please do more of those quick fixes for minor problems that else could ruin your dive!
I remember in my OW Class, My Buddy had a small stream of bubbles coming from his Yoke connection. How about a Guide to Regs for New Divers? What would be a Good Entry Level model? And so forth.
You may want to carry a 014 ORing in your kit. When the yoke connection is leaking, it may be dislodged slighty or the ORing in the tank valve (014 size) may be old or damaged.
Hi Jill. Would you say this spool is "universal"? I have an Oceanic SPG and my son's is Uwatec. Will the spool listed by you work for both? Thanks for this video.
Hello Jill. I just purchased a set of Genesis Prana Reg and Octo. Next I am getting a Sherwood 3 Gauge Console. Should I put some Silicon Grease of the O-Ring when I attach to the HP Port?
I would highly recommend building a solid relationship with a dive shop since you will need them for regulator service, air fills and things you can't get online. @@chrisphilhower6029
@@JillHeinerth Last night I was talking to a friend who is also Certified. He said the same thing about the Local shop. Scuba is a Sideline. Ths shop Favors Aqualung products. I prefer Sherwood/Genesis products. They seem to work well for me. He sells them. Usually Order Only.
Thank you SO much for this little video. There isn’t much practical tidbits like this that are easy to understand for nonpro divers out there like me. Please do more.
Thanks for the quick diagnose videos, actually saw both of them happen while diving already, rising IP and leaking HP o rings in the SPG. Please do more of those quick fixes for minor problems that else could ruin your dive!
Very helpfull video. I like your 'easy tone' tone of explaining. Thanx again from The Netherlands
Adding that to my save a dive kit
Thanks for the tip. This happened to me today at Ginnie.
I remember in my OW Class, My Buddy had a small stream of bubbles coming from his Yoke connection. How about a Guide to Regs for New Divers? What would be a Good Entry Level model? And so forth.
You may want to carry a 014 ORing in your kit. When the yoke connection is leaking, it may be dislodged slighty or the ORing in the tank valve (014 size) may be old or damaged.
@@JillHeinerth The Instructor saw it. Had me place my hand on the yoke during Navigation portion
Hi Jill. Would you say this spool is "universal"? I have an Oceanic SPG and my son's is Uwatec. Will the spool listed by you work for both? Thanks for this video.
yes!
Hello Jill. I just purchased a set of Genesis Prana Reg and Octo. Next I am getting a Sherwood 3 Gauge Console. Should I put some Silicon Grease of the O-Ring when I attach to the HP Port?
There should be a sheen of silicone lube on the O-Ring... but not too much. You can ask the dive store tech to install it when it comes in.
@@JillHeinerth I bought it online
I would highly recommend building a solid relationship with a dive shop since you will need them for regulator service, air fills and things you can't get online. @@chrisphilhower6029
@@JillHeinerth I have only one within an Hours Drive of me. The shop that Certified me
@@JillHeinerth Last night I was talking to a friend who is also Certified. He said the same thing about the Local shop. Scuba is a Sideline. Ths shop Favors Aqualung products. I prefer Sherwood/Genesis products. They seem to work well for me. He sells them. Usually Order Only.