VINYL Install in FORD TRANSIT VAN
Вставка
- Опубліковано 23 сер 2024
- Today we're finishing up installing or Vinyl floor on top of our AVC Sub-Floor. If you have a question about or install or anything else feel free to drop a comment down below
Store: avcrig.com
Tools / Materials you'll need:
(Using these links helps out the channel through residuals)
3M Sprayer: amzn.to/3iQGqoQ
Olfa Knife (Upholstery): amzn.to/3IU19m0
Respirator: amzn.to/372NkEA
That looks great. I want this type of floor but im worried Ill mess it up and I won't have help to do it. Thank you for the tutorial.
Fantastic series
Do you prefer penny flooring, to most other options, specifically if using as a toy hauler type of build? Where do you purchase it? You guys have some really informative and shorter how to videos that are super helpful. Thanks!
Where did you guys get the coin mat from? All I’ve found in custom length options is 10ft wide and that seems like I’d end up with a lot of waste. Thanks!
It’s G floor. We have to order 10ft and cut off the excess. All of us have 3’ strips in our garages and side projects. 😂
Thanks for all your videos. They've been extremely helpful. My floor is lonwood with the foam backing. They call for an epoxy, which has very little working time and seems a little excessive for this. Do you think the 3M 90 would work ok? I'm not sure what the difference is between the lonwood and g floor. Thanks again guys!!
I’ve done lots of Lon wood. The 90 can work but you really need to get the off gassing correct. We have transitioned to 70 because of supply issues and it’s working better. The recommended epoxy is a nice product and from my memory had more working time than contact adhesive. Hope this helps!
Great video as always do you all have a video on the JMG seat base and seat install. Thanks
Not yet! I’ve talked with JMG about doing one though.
Thanks for the reply my wife an i love your channel and has been a great help
Nothing like watching a video showing products nobody can buy. #kilmat
Hi there. The coinmat that I purchased is rubber backed and the manufacturer recommends 3M Rubber & Vinyl 80. Do you recommend this adhesive in a van? Any off gassing issue during hot months? Thank you!
Our floorings all have a cloth backing. I did a rubber floor a long time ago and we used a trowel on product. I don’t remember what it was unfortunately. I do have a can of 80 at the shop. Best thing to do is test test test.
that coin pattern looks really hard to do a simple sweep on without dust and debris catching on every single coin.
It definitely holds more dust, but it also doesn’t show wear as much. I’ve done smooth wood look and the coin and prefer coin.
I was curious if you found that when you put your galley cabinet on top of the small coin flooring if there are gaps between the raised coins or it compresses enough for that to not be an issue.
You know it’s not something I’ve really ever worried about. There is a bit of give in the flooring. I’ll look the next time we install a kitchen.
And what point do you add/run the wires for everything? What is the order of layering everything including floor layers?
Can u add a heated floor?
We have videos for wiring. Wires can go in as early as you like.
Great video, as always! What adhesive do you recommend for vinyl floors?
We are using 3M 70 for a fabric backed vinyl flooring. The fleece like backing of the g-floor really sticks well. I definitely recommend testing whatever you want to try. It’s all based on your flooring material. I’d check with the manufacturer to see what they recommend.
What do you use to attach the L track to the floor? Does it come in direct contact with the Van's metal floor? Thanks for the video!
We through bolt with 1/4-20 hardware but you can use whatever you feel comfortable with. We space ours up 1/2 to allow for our floor insulation system.
That adhesive spray pattern is amazing!
What spray gun is that?
It’s the 3M lace pattern gun.
@@AVCRIG 👌🏻 nice work
We are wanting to install that same coin flooring from G floor do you know which one you all ordered. Thank you
We use the G-Floor Small Coin Flooring
@@AVCRIG Thank you
What thickness is the vinyl?
About 3mm. Best to check with the manufacturer. We use Lonseal and G floor.