Cakewalk Tutorial E12 • Automation from Beginner to Expert Level
Вставка
- Опубліковано 27 лип 2024
- In this video, we look into almost everything about Automation in Cakewalk, from beginner level to expert level.
Hope you find it useful.
Previous Video (Recording Audio) - • Cakewalk Tutorial E11 ...
Next video (Bounce to Audio) - • Cakewalk Tutorial E13 ...
Don't miss out 👉 / @adk_studios
#Cakewalk #Tutorial for #beginners - • Cakewalk Tutorial Series
Chapters ▼
00:00 Intro
00:27 Why Automation?
01:39 What is Automation?
01:56 Automation Lanes in CbB
04:50 Track Edit Filter
05:59 Automation Snapshot
06:22 Automation Write
07:37 Automation Write Modes
09:00 Automation Read
09:22 Global Read & Write
09:59 Automation Write Tip
10:45 Working with Nodes.
12:20 Automation Curves
13:03 Re-assigning Automation Envelope
13:20 Copying Automation Envelope
14:04 Copying to a different Track
15:24 Delete vs Clear All
15:59 Don't misunderstand "Remove"
16:18 More on Deleting
16:30 Line Tool
16:51 Waves/Pattern tool
17:35 Detach automation from clips
18:16 Automating a bus track
19:37 Clip Automation
20:57 Automating Clip FX
22:21 Clip Gain Tip
22:32 How to Automate Tempo in CbB
23:31 Last Tip
If you are not a beginner, check out these music production playlists▼
► Hip Hop - • Cakewalk by Bandlab (H...
► EDM - • Cakewalk by Bandlab (E...
► Orchestral - • Cakewalk by Bandlab (O...
► All in one - • Cakewalk by Bandlab (M...
► Other In-depth tutorials - • AdK Tutorials
Downloads ▼
► Cakewalk by Bandlab (DAW) - www.bandlab.com/products/cake...
And Here is my intro ▼
Started out as a UA-cam Music Producer.
Now I make music under the name Shraid.
I also release LoFi Chill music under the name Meek Motif.
Find all my music ▼
linktr.ee/shraid
You can also find me here ▼
► Discord - / discord
► Instagram - / shraidofficial
► Twitter - / shraidofficial
► Facebook - www. adkmusicYT
Another tip is that when you automating a clip you can hold Shift then click on the clip where the automation lane is not (above the line or below it, but still on the clip) that will quickly take you back to the “clip” mode, so you dont have to move your mouse to the track to change back to clips. You can also hold Shift and click on an automation lane to select it and edit it, so you dont have to go back to the track and select what lane you wanna automate
what?
I never usually leave comments, but your videos are by far the most in depth and clear cakewalk tutorials I have seen. Thank you so much for your awesome tutorials!
Forgot to mention that you can rename each automation lane like the tracks.
Cheers ✌🏻
Bro i downloaded cake walkby band lab and also si instruments,meladine but it is not showing si instuements in files also help me to fix this problem
One of the best Cakewalk tutorials, yet!! Thank you
Your tutorials are by far the absolute best for cakewalk. No question. I can't thank you enough brother.
Yor tutorials are really the best ones I have seen for cakewalk. They are absolutly fantastic. Every single one gives me new workflows and this helps a lot to give creativity more space. Thanks a lot.
Great to hear!
You are the real-deal. Just gave me a reason to live, lol. Keep it going, friend!
Live your dreams, friend.......!
I've been scratching my head and this tutorial had everything I needed to learn and more. Kudos for the amazing job!
this video is packed with SO much useful information!! i had no idea cakewalk was capable of this much. i never even noticed that there was a bus pane or that you could automate busses like tracks. so cool! thanks so much for this tutorial!
Thank you so much for these, loving it
hope you keep making cakewalk videos dude this is the best tutorial ive ever watched on Cakewalk and trust me ive watched them all from Creative Sauce to Home studio simplified to Help Me Devon this is amazing 20/10 for sure great video Thank you!!!!!!!
Awesome.
However, I won't stick with tutorials only.
The goal of the channel was to inspire beginners to produce with CbB and other freeware.
But, since I'm finding that the series actually has become quite useful, I will have doing such videos as my secondary goal.
In short, I'll be switching between tutorial & production videos.
✌🏻
@@adk_studios dope that’s exactly what I’m looking for too I’m gonna be a huge fan for sure thanks for all the hard work you are helping soooo many people. Like and Sub everyone!!!
As usual, outstanding informative video! A great reference for anyone using Cakewalk!
This was so great. subbed man you deserve it
Was looking for this 🙌🏻
Oooh I have been waiting for this
Wow!!! Fantastic tutorial! Complete and very straightforward! Thank you very much. All the best
It's a shame this doesn't have more views. This was highly informative!
Glad you found it informative.!
Hopefully it will reach to more people...
It will very soon
Thank you for making this video! It is exactly what I needed!
Wow! This is an amazing video. Thank you! So much information quickly, concisely delivered with excellent visuals.
Super useful info. thx!
Excellent tutorial. Thank you for sharing.
Awesome tutorials 👍👍👌
Nice tutorial, thorough and well paced.
Awesome Bro Following your tutorial from the start reached till here!!! THANKS YOU
Fantastatic tutorials brother! U have done a great job! Yours is the best of all cakewalk tutorials in youtube!
Thank you mate. This was VERY useful. Thanks for breaking it up into easy to find sections, too. I wish everyone would do that!
Glad it helped
It’s amazing that you can do so much with automation. I have to learn this but it sure is complicated!
I would suggest you to reduce the playback speed and watch closely.
& yea. Automation is super useful. Especially in the kind of music (electronic) I'm into.
Good luck
Very helpfull, keep up great work :)
thankk you soo muchh
I wish there would be an option to bend the automation curve like in many DAWs.
Also, top tier video!
Thanks...!
Hope that it will get added in some future updates.
great video
Just wow... 👍
wonderful
very much appreciated
Nice
Adarsh mwone you just killed it 😍❤️
hihi... 😂
Like all your videos this is a really in depth tutorial of automation. I have to slow down your videos even though I probably have to watch them several times too. did you read the whole manual 100 times? : ) Thank you so much to spread your amazing knowledge! away.
Hihi... As a matter of fact I do refer the manual a lot in order to not miss even the trivial points😁
@adk_studios I have a book on Sonar. It's almost 1500 pages and still doesn't cover everything. It's amazing how feature rich Cakewalk is. I don't feel a need to buy the new Sonar. I could live three lifetimes and still not know Cakewalk through and through.
Thanks for all the info you put out.
It's a great help for those of us that struggle with the software.
unique videos !!!!!
I love how this is his voice
Great video...There's a lot to take in...Thanks
Thanks.!
Love the Name you have there 💯
@@adk_studios Thanks…just a point on tempo automation…could I firstly record all of my tracks at a slow tempo then, when they are all bounced down to a final stereo mix adjust the tempo to suit at the end without affecting pitch of the vocals? (I’m new to Cakewalk) …Thanks again
This would probably be not possible.
Tempo automation doesn't change the audio clip lengths.
@@adk_studios Yeah…Thanks very much…Could I increase or decrease the tempo of a vocal track in audiosnap to match the global tempo without warping the vocals?…they seem to be lagging behind the rest a little 😐
As far as I can tell, warping is how audio snap works.
If you don't want to warp, you will have to split the audio clips and fix them in time by yourself
Wow, thanks, lol. Been using cakewalk for almost a year now, and it's kind of embarassing how I knew barely half of what's shown here lol.
Hihi... It happens
💪🔥💪
Thank you so much for the video. Your videos are the best! I have a question: you can use the fader in the mixer to write an automation lane for 'volume', Question: Is there a way that you can assign the fader to write automation for a different MIDI parameter such as 'Modulation', meaning that you can move the fader up and down to create an automation lane for Modulation parameter during playback?
The volume fader only controls volume. Don't think there is anyway that it can be assigned to anything else
Thanks again for another extremely useful and clear-to-understand tutorial. Please explain the fifference between Gain and Volume?
Gain is the level of audio signal before processing. Volume is the level of audio signal after processing (volume fader in the console)
Additional info -
A lot of VST FX plugins are modelled after analogue hardware. And they might operate the best when audio at certain gain is input to it. This process of increasing or decreasing the audio signal level before processing is called gain staging. Look it up
@@adk_studios thanks for shedding light on this matter. So, I assume that both of them process the audio signal differently.
No. Both control the level of audio signal.
We call the level before processing as gain while we call the level after processing as volume.
Processing is done by VST FX plugins
@@adk_studios thanks, I get it now.
I need help :( I have a problem, I have two instruments, in this case 2 "vital" tracks, I automated the pitch in the first one, and in the second one I did it too. And for example when I try to move the clip in the midi, the two Automation lines are interchanged with each other. I don't know if I made myself understand...
Interchanged?
I don't think that is suppose to happen.
It could be a bug?
Just to be safe, create the second vital track without duplicating the first one.
😍😍
സാധനം കയ്യിലുണ്ടോ?! 🧐
This was perfect! I think the only thing left was using knobs or surface controls and how to automate using them. Also I don't know if there's a function like the one in Fl studio called Last Tweaked which it helps you to know the parameter name and the knob or fader is linked to it by moving it. Is there something like this in cakewalk?
I would have loved to show how to control with external devices. But if only I had any such device.....
I'm afraid there isn't anything like "last tweaked" in CbB.
@@adk_studios unfortunately there's not such option. I was searching yesterday because I have a controller with 2 knobs. I could see which parameter was assigned to the knob my moving it on my controller but i couldn't see the 2nd one, although it was assigned to another parameter. So this is why I thought cakewalk maybe had a last tweaked option or something similar, to see the name parameter assigned to my knob and what's it name, but i didn't find nothing about this. All I could find was the remote control on automation track and it list all the parameters available for each plugin but it doesn't tell you what knob is being assigned to them.
I'm trying to use Cakewalk's own FX Transpose to transpose some MIDI notes, but when I go to Clips -> Clip Automation -> the only option available is Velocity. Any clue what is causing this?
I don't think that is how you transpose in CbB.
Hi, so for automations, I know there is volume and that, but I would like to ask where I can find high and low cut. The tips for how to create in the automation lane is great, and with this, I want to create some sort of high cut effect. However, I can’t find high cut or low cut in the automation lane choices, neither in the other automation sections. Do I need a plugin with high cut??
At 3:29 you can see Pro channel options. One of them is for EQ. If you open the EQ inside the Pro channel section, you can enable filters in it. Then right click the filter's knob and select "automation snapshot"
@@adk_studios alr. Thank you.
... 👍👍 !!
I have a question. Sometimes I open up a plugin like vital, and some factors of the synthesizer change after a while. For example, I open up vital, but then the first oscillator's audio turns off after using vital for a bit, and I have to turn it back on.
When in a CbB project, Open Preferences
Under Project, click MIDI.
Enable "Zero Controllers When Play Stops". If its already enabled, then disable it.
This will affect all the instruments that might need the MIDI CC to return to zero. (It mostly applies to plugins where the Modulation Wheel, the one controlling that CC plays a huge part in giving expression).
@@adk_studios Tysm! It really helped.
Effective videotutorial, thanks. A kind question: can VSTi Program Change be automated? I tried clicking "W" on the top of the VSTi UI and than changing the Program/preset in the UI while playing, but nothing happened...Thanks in advance!
We can only automate parameters with automation.
Preset is a saved state of all the of the plugin parameters.
So, no!
Do you have a video showing how you set up your projects? My screen looks nothing like yours 🤔
I'm preparing a video on templates. It might help
I need a help! Pls make a video on one of the most commonly asked questions by all vocalists like me! How to record, mix and master a two track project i.e. i have a karaoke track and i want to record vocals as cover and publish it online. There are no such tutorials that address this problem especially for cakewalk! pls help!
I'll look into it... 👍
How do I get a Hybrid track
In CbB, hybrid tracks go by the name instrument track. (MIDI + instrument out).
So, simple add an instrument plugin as a "simple instrument track from the CbB browser
But how to change automation lines color?
I don't think its possible...
Can you show us insight on how you can convert audio to midi. This will helo for those who cant play instruments
I actually did a video on it. 👇
ua-cam.com/video/iqUPd-cSArU/v-deo.html
However, this will not work anymore. The conversion was made possible by Melodyne which could be installed as an Addon through Bandlab Assistant. This feature was removed after version 4 of the free Melodyne.
@@adk_studios Wow, thanks ! Is there any other way to get around this ?
Check the pinned comment
Where are displaied the automation created inside busses?
Watch the video at 18:38
@@adk_studios Yeah i found it.Thanks! How can i colorize the track items?
@@InnerSyncMusic If you wanna color the track, click on the left most section of the track. This will color the items in the track too
If you want different colors for different clips in the track, select the clip, open the inspector pane (Shortcut I), hover over the icons on the top, until their names pop up. Then, click on the icon which displays "Show/hide clip properties", and there you can see "foreground" and "background", with which you can change colors
Difficulties to understand
Kindly watch again with reduced playback speed...
& feel free to ask questions if you have any...