Oh deer! Lol. Stagedive is looking really good. Love how clean/less wires the fusion is. Got plenty of slow and towline bit plenty of speed with the 2300. Very nice!
I had the 1800kv fusion in 2 rigs. Ordered the fusion pro for my capra, needless to say next time they were in stock i ordered 2 more... The fusion pro is absolutely amazing.
Running the same motor in my crawler and love it! They are hard to find, but I'm also running a hobbywing dual line 10 amp bec.i run my steering servo and my winch off of it.adjustable from 6 to 8.4 volts.i use an old brushed esc for my winch,so I can use my transmitter to operate it.
@@jaybomb5022 cool,I needed another one.i was getting mine from helidirect. I'm getting ready to put High voltage servos in my baja along with a lipo reciever battery.
I built a negative g chassis 4ws steer capra, with the 1800kv fusion. pretty much idential to this build lol. Still running stock capra steering servos, those need an upgrade.
That fusion motor set up is a sweet and clean set up. Some really nice slow control. Body sounds like it might need a little bit of a trim.. that was a super tongue twister haha... awesome driven Joe. Well done as always .👍👍 placing my order for the Raminator Mega and electric conversion today. So excited to get my hands on it. Will definitely be watching your videos on that clutch spring Removal. Can the shoes be taken off as well. Or are those still needed?. Have a great day sir and everyone keep bashing
If you want to clean that truck up even more and would like even better slow speed start up and control look at the silent assassin esc. One of the best bits of kit I’ve used in crawling so far
Oh deer! Lol. Stagedive is looking really good. Love how clean/less wires the fusion is. Got plenty of slow and towline bit plenty of speed with the 2300. Very nice!
The 2300kv makes my Trx6 hold still at nearly vertical, I'm beyond impressed 👏
I really enjoy your enthusiasm and excitement in your videos. Thanks for another good video!
I told myself I didn't want to have the same setup in my different trucks but you reminded me how good the Fusion Pro is and ordered another.
Oh deer! Lol. Stagedive is looking really good. Love how clean/less wires the fusion is. Got plenty of slow and towline bit plenty of speed with the 2300. Very nice!
I had the 1800kv fusion in 2 rigs. Ordered the fusion pro for my capra, needless to say next time they were in stock i ordered 2 more... The fusion pro is absolutely amazing.
Ordered the 2300kv Fusion for my 2.2 Capra last night, happy to see it ran well in your rig!
Running the same motor in my crawler and love it! They are hard to find, but I'm also running a hobbywing dual line 10 amp bec.i run my steering servo and my winch off of it.adjustable from 6 to 8.4 volts.i use an old brushed esc for my winch,so I can use my transmitter to operate it.
Nice. I was happy with no brownouts or anything
Amain hobbies has them in stock if you're interested.
@@jaybomb5022 cool,I needed another one.i was getting mine from helidirect. I'm getting ready to put High voltage servos in my baja along with a lipo reciever battery.
That’s a great idea 💡 ☝️💯🤗✌️🙏👍☘️🙌
@@adamgandy6470 yes,you just use the signal wire and I doubled the ground.ground going to the bec and esc just to b safe. Works awsome!!
That truck is on another level!
I just bought a capra kit during the sale, and this sold me on this chassis and setup
Cream of the crop here saying thanks for another great video full of knowledge and enthusiasm ✌️
That thing is got you at a loss for words buddy great video 📹 👍 great truck 🚚
Joe! Your just so human lol awesome job and truck. I'm looking into the fusion myself👍
I like mine and may put one in my SCX10.2ish too 👍
Dude that bench stand metal plate thing is sweet. I’ve never seen you use it. Carry on
Nice truck. I just got the same motor. Keep up great work
I’m running the same thing in my Trx4 awesome setup! 👍😁😎✌️
Nice video mate great truck lots of power 2300kv motor just like might motor 👍😉
Hi Joe, check out RES Concepts for their battery mount. It puts it behind the servo on the axle. I just ordered one for mine.
Nice rig 👏🏿👏🏿👏🏿👏🏿👍🏿🏁🏁🏁🏁🏁
I built a negative g chassis 4ws steer capra, with the 1800kv fusion. pretty much idential to this build lol. Still running stock capra steering servos, those need an upgrade.
Gspeed sells cool battery tray that set in there! 3d printed!
fun stuff!!!
That fusion motor set up is a sweet and clean set up. Some really nice slow control. Body sounds like it might need a little bit of a trim.. that was a super tongue twister haha... awesome driven Joe. Well done as always .👍👍 placing my order for the Raminator Mega and electric conversion today. So excited to get my hands on it. Will definitely be watching your videos on that clutch spring Removal. Can the shoes be taken off as well. Or are those still needed?. Have a great day sir and everyone keep bashing
I have the fusion pro in my scx10 deadbolt. I still haven't taken it out for a drive yet!!!🤣🤣🤣 It has been to dang hot out.
Awesome
If you want to clean that truck up even more and would like even better slow speed start up and control look at the silent assassin esc. One of the best bits of kit I’ve used in crawling so far
He's tried it. 2 years ago I believe
@@redndeyes I didn’t realise the zero gravity esc had been out for two years already.
@@redndeyes can you link the video please. I’d like to see what he thought
@@redndeyes just found out the silent assassin has only been out 6 months ish. You must be thinking of something else
Optimus Spyder!
Ciao spettacolare. 🤙 ciò un ecto con la 1800kv... se la cambio con la 2300kv in sostanza che migliorie ci sono effettive GRAZIEE
I wonder how that chassis will work with trx4 axles but with or without dig
Got this motor in my try4 are you running front overdrive?
What settings are you running on the program card?
Awesome video! Where is your track location, is it private or do you have events?
Can the trx 4 run on the fusion? Or do I need a bec? Asking because I have went through 2 receivers. Just wondering.
Hi Joe, I can still do rear steer with that chassis too right? Bitchin chassis. About to order it now.
I have an axe v2 2100 in one of my truck. What do you think about the punch compared to the fusion 2300?
Are you using wented wheels on this ? i have tryed both on my Jconcepts and vented is the winner for me :)
Does the 2300kv fit in a stock capra
Is the fusion superior to the HH mini esc?
Absolutely
thats a sweet rigg...how about building one for me? id pay you... well give me a price first lol
Buddy my rates are too high.
Nah great. Another "must have" for the wish list
My fusion pro is enroute. Was quicker to get to US from China than from usps to my box. Go figure.
no place for winch
Oh deer! Lol. Stagedive is looking really good. Love how clean/less wires the fusion is. Got plenty of slow and towline bit plenty of speed with the 2300. Very nice!