Hobbywing 1800kv Fusion SE in Exo-1
Вставка
- Опубліковано 18 жов 2024
- This new Hobbywing Fusion SE 1800 is AWESOME!! www.hobbywingd... Check out my NEW website at exocaged-rc.my...
Links are below for the tires and the Dirty South chassis and more, use them to help support Exocaged RC, Thanks!!
ishop45.com
Proline Baja Pro X PREDATOR
Amain bit.ly/3hYCiq2
Horizon bit.ly/3Dhm1V0
UGRC on Facebook
/ ugrc-lab-102783854817852
Reefs 888 Direct Power Servo
Amain bit.ly/3N1LaoS
DluxFab
dluxfab.com/
WB8 HD Driveshaft set
Amain bit.ly/3LdFisO
Check out the 3BRC Antifoams
www.3brothersr...
Vanquish VXT2 Tires RED Compound
Amain bit.ly/3RXfJ1Q
Ebay ebay.us/YkI3qg
Holmes Crawlmaster Mini
holmeshobbies....
HK Hobbies 35kg Servo and Motors
hkhobbies.com/
JConcepts Creep Body
Amain bit.ly/3nbBhc4
Horizon bit.ly/3tj9MSJ
Amazon amzn.to/3N1KEqW
Ebay ebay.us/ELBHQa
Check out my new Affiliate website at www.ishop45.com I have a bunch there including Walmart, Amazon, Ebay, Amain, Horizon and more, just click the store you want, and shop as usual, thank you guys!
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Amain Hobbies bit.ly/3cHmsHX
Horizon Hobby bit.ly/3tMTCB5
Gens Ace Batteries genstattu.osit...
ArmedAmericanSupply (Clothing)
Buck Knives bit.ly/3yCoXZK
EMP Shield bit.ly/3Q7dMPE
HenyStar (Womens Clothing) bit.ly/3y7jDw2
BeardBrand (BeardStuff) bit.ly/3xD6af8
Maui and Sons (Surf Apparel) bit.ly/3aD4Z7Q
HeadBanger Lures (Fishing) bit.ly/3MIFpvZ
Harrelson (CBD) bit.ly/3NxQBLY
#fusion #rctruck #rccar
Going back an looking at older videos. I love my Fusion SE's I have 2 1800kv's and I have a 1800 kv & 1200 kv in my Daughters. I am planning on getting a Fusion Pro to try as well but I am waaaaay satisfied with the SE's. I still like the combinations I have using a 1080 with a HobbyWing Quckrun 555 5 Slot Brushed Motors. Those are a good combo as well, but all around the Fusion SE's are probably the best you can get as far as price, how good it is and how damned tough they are. 🤘🏼
I installed this motor into my RYFT...love it.
Hey joe let’s see the pro and the fusion run together maybe some speed runs and the differences side beside
Just picked up this motor and waiting for my Vader skid to install it all in my Capra. Can’t wait to run it!!!
I got the 2100kv yellow jackets upon release and still have to get an esc had this released first i would have went this route. Awesome videos and look forward to what 2023 brings us.
Hey Man.... I told you, HobbyWing Fusion 1800kv!
They are the best!!
I'm with you no 100%, 1000% that system is not easy to beat, and I'm surprise how good is the Exo 1, the same as you say I need to buy more of this, even others system esc burn this cost less
Those wheels look great on that truck. I have some similar on my gen 7.
thats one bmf right there ! with 4ws and LX bypass shocks that would dominate !
Awesome brother looks like a solid system very nice happy bashing bud.
I got to get one of these so you recommend the 1200 kv as well
Tested my 1800kv fusion se today..Got it in my trx4 sport kit build and its definitely not bad at all.vid on my puke tubes..steep slow climb.
I still have a tamiya rx 540 vz old school motor, i wonder if it can still perform like your rc now adays😊
I run the PRO 1200 and 1800kV motors in my 1/14 Tamiya based truck builds and the control they give is amazing plus the compact packing with my single speed transmission kit means I can normally put the battery under the bonnet or cab.
Would be interested to see the SE compared to the PRO like for like as I can't see much difference on the Hobbywing website and I could fit the SE to twice as many trucks for the £££
Good day joe I’m building the same rig as exo 1 and I was wondering what length shocks and springs are those dravtech shocks. Also enjoy your videos have inspired me too start building projects, thank you and have a great day
80mm and I think they have the soft and medium springs
Thank you sir very much and keep those amazing videos coming.
Bring that to my house.. my tires r caked with mud and so was everyone else’s 😅. We got a spot that I don’t think even your best of the best will make… believe u me even the Capra and 4ws won’t do it. Nor will a vs 410 pro.. and it’s uphill and off camber.. be cool to to hangout and crawl that’s for sure!
He’s right I have the 1200kv
One and the 1800kv. Personally I prefer the 1200kv one. The wheel speed is ah what ever. I also have the 1200kv pro 2in1 in my scx10iii bronco. And these systems fix axials bs internal hi gearing in the bronco I just said and in I’m my Capra 4ws. I put the lowest 11t pinion in both of them. The Capra is really bad and now with the 1200kv SE and 11t is amazing. It will fit it’s tight I just shaved down the inner lower link perch and put a bevel in the motor case. Brilliant I will buy no other system that requires brushless.
O yeah.. I should have mine soon buddy 👍
Nice video broo...
Is it able with 3s 100c battery?
Is it strong enough to play in mud/heavy mud?
Dive in mud?
Thx
do you think hobbywing will bring out a 380 sized fusion to fit the mini capra? would be awesome
Let’s go
Wonder how that motor would hold up in a Traxxas summit would like to see that
Nice demo of the 1800kv, I really like the Pro 2300kv in a portal Phoenix. I wish Hobbywing would get into the micro crawlers. Super tired of lizards burning out, especially for what they cost. There are some ok stock systems for brushed micros, but there isn`t many good esc`s available for brushless micro crawlers, other than lizards.
Furitek
@@lowslowcrawlers1304 Furitek needs some competition. Their products are great, when they work. It gets very pricey to replace Furitek esc`s out of warranty. Just about cheaper in 10th scale.
The minimum start might be related to the higher rpm / resistance of the pro. Probably not programming
If Hobbywing would make a 4s compatible Fusion then it would be in all my rigs!
How much for that complete rig? I love it
Since your crawlers are comp focus you should try out the new bug body
Happy New Year Joe 🎉 I would love to see sv2 vs exo-1
Do you think there is any benefit in getting the 1200kv over the 1500kv fusion se idk what one to get or if I should just break down and get the fusion pro for its low start up.
I just got a axial base camp and was looking for some mods to help it rock crawl better it's my first crawler so I'm kinda lost do you have any recommendations like with tires or anything really?
At this time I see no benefit to doing that
Tirewise I can recommend the "Hyrax" and "Baja Pro X" from Proline Racing, "Landmines" and "Tusk" from Jconcepts as well as "Goodyear Wrangler MT/R" from RC4wd. Just choose the ones you find the best looking.
Remember to check the tire size before buying, most likely you'll want tires for a 1.9" wheel and with an outer diameter of 4.7" to 4.85".
ist the 1800kv SE or the 1800kv combo better?
Nice 👍🏾
For 70 dollars that's a good system. Yes revolver is better but after cost of motor you still need an esc. So from my perspective,way better bang for your buck.
The revolver is not
Better at all. Friend has one in his Capra with stock trans and my SE has so much lower start up speed by mile. You can find a spot of cogging with his because the internal gearing is too hi. It’s very obvious when there side by side. Not a hobby wing fan boy…well maybe now. And there absolutely dead silent.
HobbyWing will smoke it!
Where is your playground at?
👍😁
Can't find one anywhere
Great build with some nice parts.
Good power system too. You've definitely become a good builder.
Only negative is that body. Today's trend among some hobbiest to cut half the body off is extremely unpleasing to watch crawl. No "real" offroad rig looks like that where there's less bottom cab and more side window. I know you're just following this small trend, but by that much chopping...at this point, you're just crawling the chassis and drivetrain.
What happened to cutting and painting a body that looks somewhat realistic?
I don’t like the bedless builds. I wish we had another body option but there really is isn’t anything that can be done like this.
Lol you don’t know much about crawling. Your pretty committed with 250 tons of concrete and stone in your yard. Happy New Year 🎉
I bet I can run anything you do… one handed… while recording… happy new years
Only said that cause you said you don’t know much about crawling. I know it was a joke. And yes you can throw blind folded with one hand while recording in there. Not a crawling type but love your channel
I think some quotation marks would've made it clear.
Point n shoot kinda rig 🤣
Deeeooowwwnnnn
Bought a danchee and was thinkin about trying to run 2 think it'd work and fit? @exocagedrc
revolver is better there is no comparison for a little bit of cash
It comes with esc tho the Revolver doesn't.. so it's more than a little bit of cash whenu have to buy an esc
I agree. But between a Stubby at $75 and a 540 Revolver at $85 , then you gotta buy a Crawlmaster Mini at $110 and a Castle BEC at $24.....the Fusion at under $80(to your front door) is definitely appealing.
Most my rigs are Holmes Revolver and Puller Pro's. I love both, especially the massive 4274S. I'd put that beast in anything it'll fit it.
My other rigs(my two Sons rigs included in ther) run Fusion. I believe 3 rigs out of 15 have them. Everything else is Holmes.
You just can't beat the torque-density.