I have the pl k10 on my negative g build. It's not pinched enough in the front and the back not at all. Looks nice but you have to be creative. I have a couple videos where you see it...
I'm not exactly sure what did it, but after I updated my 3300kv Axe system, the min start-up speed seems to be much lower. It doesn't "lurch" forward nearly as bad as it used to. Still using a 58t spur with a 11t pinion. And it still has plenty of "umpf" even with the punch and start-up turned all the way down. It's a coin-flip on whether I would rather run it or my 11t Holmes Magnum setup. I keep waiting for HW to come out with a 2800kv Fusion, but I don't know if their 60a internal esc would handle it.
Have you thought about doing a rock pirates build. I know they just released their own chassis and from the looks of it it might be an awesome contender.
@@ExocagedRC it’s a flat rail chassis that looks good. Only offered in steel and aluminum right now. I’m thinking of getting the base camp to use as a donor.
If you removed all the internal tubework from a Capra cage, leaving just the outer shell, and swapped out the plastic body panels for lexan ones, would it be light enough?
I hate the limited selection of light crawler bodys. There are lots of shorter wheelbase selections. After a long search for something different I just picked up a Montech Mont-Rock Jeep body to be a little different than everyone else.
Crusty old NYC punk rocker here, had to watch with that title... ✊️
The new Proline 1972 K10 body would be awesome to see. So burnt out on creep or power wagon style bodies. This chassis looks awesome.
I have the pl k10 on my negative g build. It's not pinched enough in the front and the back not at all. Looks nice but you have to be creative. I have a couple videos where you see it...
You should come out with Exocaged Bodies ! The crawling hobby is in a power wagon rut .
Is t that the truth. It seems like everyone runs the same damn body’s.
Lol I actually just did a power wagon body...
New chassis really changed the entire dynamic of it. Super cool 💯
Awesome 👏🏼 run. A lot of 1st timers with this rig. 🔥👍🏼🔥👍🏼🔥👍🏼🔥👍🏼
Good rip, Joe. Awesome build.
Have a look at the montech rock body
Nice build Joe, wow. 👍
Take a look at the G Speed site and the One Shot body and the Team C Clear Samurai body's.
Hello Exocaged 👋
Cliffhanger
Jconcepts new body may be called power master, looks like power wagon
Proline has a new Chevy body that’s like the cliffhanger pinched front end and a narrow tail
What is it called? I haven't seen it
1972 k10
I'm not exactly sure what did it, but after I updated my 3300kv Axe system, the min start-up speed seems to be much lower. It doesn't "lurch" forward nearly as bad as it used to. Still using a 58t spur with a 11t pinion. And it still has plenty of "umpf" even with the punch and start-up turned all the way down. It's a coin-flip on whether I would rather run it or my 11t Holmes Magnum setup. I keep waiting for HW to come out with a 2800kv Fusion, but I don't know if their 60a internal esc would handle it.
Have the same opinion on the chassis being covered by the body.
Have you thought about doing a rock pirates build. I know they just released their own chassis and from the looks of it it might be an awesome contender.
Haven’t seen it
@@ExocagedRC it’s a flat rail chassis that looks good. Only offered in steel and aluminum right now. I’m thinking of getting the base camp to use as a donor.
I would like to see the 2.2 pro-x's on this crawler
If you removed all the internal tubework from a Capra cage, leaving just the outer shell, and swapped out the plastic body panels for lexan ones, would it be light enough?
I put a Gozer body on mine.
i like the front suspension bungee strap were did you get does
wolud you miand shearing a link to were i can by does
@Forrest Farris thanks bud
I hate the limited selection of light crawler bodys. There are lots of shorter wheelbase selections. After a long search for something different I just picked up a Montech Mont-Rock Jeep body to be a little different than everyone else.
Go hard body RC4WD Mojave!
Do you have problems with rear driveshaft spline falling out? When shocks fully extended the center spline part of driveshaft comes out.
That performs awesome great vid as always 👍I do have a question are the Capra portals as wide as the old ar 60 axles from the wraith
No between those and AR44s.
@@garethcurtis9665 thanks for the reply man 👍
Jeep Comanche body by proline would look the part.
How much does it weigh mate? Between this build with portals and the straght axle super light build, which do you prefer?
Not sure if the weight. It’s hard to choose a favorite as they both perform very well
How about a Moshpit review!!!
Do the new jconcepts power wagon body
I’m actually trying to get one of those
Mst cfx-w "jeep" body. I have one I would donate that has some clearance trimming done to it.
I almost wonder if this build is faster on top speed then the cr-10
Are you gonna get a kraton 4s or outcast 4s or nah
do you think this is as capable as a g-speed G shot?
Gspeed has a new body - scaler clear lexan body mm
Is that a 1/10 or 1/18?
New proline Chevy body that has a little bit of a pinched nose and dovetail to it.
👍😀
👍🏾👍🏾👍🏾
Proline just came out with a really nice 72 chevy that’s like your other Pro line body