Scx10iii Team Garage Hack Overdrive
Вставка
- Опубліковано 30 бер 2020
- Awesome gears, great turning and great for comps, not so great for trails though.
Supershafty is where you can get these supershafty.com/products/tghc...
Got things in your Amazon or Ebay cart? Use these links to check out and help the channel get a few pennies, every little bit helps
Amazon amzn.to/2wMUYRY
Ebay rover.ebay.com/rover/1/711-53... - Розваги
![ОРБАН приехал к ПУТИНУ и "отчитался" о поездке в Киев 😁 [Пародия]](http://i.ytimg.com/vi/_0ukDovOWq8/mqdefault.jpg)
nice crawler course man wish i was your neighbor !!! lol
The overdrive changes your final drive ratio. Your final drive ratio is always based on the fastest set of tires. We run into the same thing running the t-case OD flip in a TF2. It creates alot more heat because of this added labor on the motor. Great video as always man.
Your right EXO, wow big improvement on steering!! Man that lose of sidehilling is the deal breaker for me. Where we drive there is a ton of sidehills to get to each rocky section. At one point I thought you installed a sound kit for valve tick!!!!
LOL I am wondering if thats my rubber bands making the shifters rattle, I may try to loosen them up and see.
Hi Joe, Nice video. Wish that TGH would also make a more moderately geared set of overdrive portal gears in the range of 20%. Thanks.
They do. He installed the WILD version, but they also have a MILD one that's less overdrive. Check the link in the description.
On extremely steep climb , having the rear underdriven helps the rear axle from trying to drive "under" the rig helping it not to flip over...I don't necessarily think it'll climb steeper but definitely more stable.
I ALWAYS prefer underdriving the rear as for overdriving the front because the closer the axles get to "freeway" gears to more torque-twist you have to deal with.
Same with going down hill...the front slightly dragging the rear prevents the rear from coming over the top and allow the front to lead.
I agree with you. There's not enough UNDERDRIVE options, for any Rig other than the SCX10 One.
@@CarminesRCTipsandTricks Oh...the TRX4 has overdrive and underdrive option.
I think...maybe the Axial doesn't have underdrive is there's not enough room in that small diff-case for a bigger ring gear.
@@tomlucasrccrawlers9108 yeah, like I said, only SCX10 One...
I think with today's technology, someone can machine a tiny Ring Gear with one more tooth. The Traxxas Underdrive Gears are about the same physical size.
Saw a video that explained the clicking, behind the bell housing those two gears that are held in place by pins . Each gear has a squared notch and a rounded notch on opposite side if you use the rounded one clicking stops.
Good info and nice breakdown! I'm a fan of around 18-22% overdrive up front on most of my serious crawlers. All in preference and where you're driving!
Oh My, do I like your color🤩🤩
Thanks for youre Nice, well explained videos.
I think that this clicking may be caused by gear hitting the gear selector. All that slope in between selector and gear may cause to tension up and lose the drivetrain and hit eachother. Easiest way to check it would be putting some cushion on selector teeth...
Another great 1 bro really cranking out the killer content
I'm so mad, got their mild 25% and now with the tires back on and the driveshafts off the front is kinda tight and noisy. The stock in the rear is smooth. Took everything apart again and see nothing wrong. I'm at a loss now 🤷
Really informative video 👌
Good hack but trx4 just lock back axles up and not front but yeah virtually same any like tht for trx4 🥰 cool hack 👍👍👍 loving your vids
I like the clicking for some reason
can you please check on that clicking sound?
yeah its annoying
You need to adjust valve lash on that engine. Lol
Marion San Pedro yeah I’ve dug into it twice with no luck on getting it quiet.
Regards to the clicking noise, try using a graphine impregnated grease 😉
After I locked out my hi gear it got quiet didn’t see a reason to use it crawling I used the factory lock out spacer and used a nut to snug it down...try the 1.7 ratio really helps gear it down
I went to buy the gears through your link. I definitely can't afford them. They are listed as $1,000,000.00. What's up with that. I added them to my Cart and the price didn't change.
Hey. Why does the truck sound like a small diesel tractor? Thx in advance
Don't know yet
Good good
I really don't have any use for an overdrive setup. I like running my drive train, a little on the sloppy side. After trailing and rock crawling with an over driven rig, I didn't like the way it tracked.
would be nice to can shift a overdrive in first gear and second gear without overdrive.
TGH Colorado;)
When you figure out what that lifter ticking sound Is, I want to know. That sounds So scale here on the tube, other then no exhaust note. lmao
It actually looked to me like it made it worse for everything except turning.
My thoughts at this time are mixed on anything except turns like you mentioned. Sometimes it seems to help but other times I wonder if it hurt it.
I have a capra and found that those gears hurt climbing. To much over drive. I have found that around 20% works best for climbing.
I like the Hot Racing versions as they are less, I've heard about a new set of gears from TGH with less od in them so that could be an option
I agree, too much overdrive
@@ExocagedRC Yes I use the hot racing gears and the over drive gears for the differential. Took some work to get the gears in the diff to mesh right. Not sure if I got a bad set or they aren't exactly the same as the 6 bolt sc 10ii gears. Look the same. Going that route it climbs real well.
Click click
Boom!!
What motor did you put in it
Holmes Hobbies 550 Crawlmaster 10T.
Almost 40% OD in a trail truck??
No thanks
👍👍