Build this SUPER SIZE 10" Long Range FPV Quad!!! - Rekon 10 Pro & DJI 03 - Step by Step Build Video

[@crash_lander]

First time I see you without a cap 😄

[@dronecamps]

I feel naked 😂

[@JSKCKNIT]

I'm in the process of building this. Going 8S though. It's going to be a slow build, ordering parts every few weeks. Kinda frustrating though cause I just wanna fly it!!

[@millerllm]

Dude! You are one hell of a presenter and teacher. I have never built a drone before however I love flying and have all of the DJI drones. After watching this class of yours I will start buying parts to build my first ever drone. Definitely I am that guy that loves to go BIG so 10 inch it is. Hopefully I’ll be done by fall. I will join your site and I’ll keep,you posted. Thank you for your support doing all these amazing and helpful videos.
LO MILLER

[@dronecamps]

You’re welcome! Keep me posted !!!

[@patrickpendergast898]

Same here. I recently got a phantom 4 pro as my first drone and was bored of it in 2 days. This rekon 10 build seems fairly straightforward. Now I’m shopping for parts planning out a build.

[@ronaldcollins9618]

I know this video is 6 months old but I'm just seeing it. Something isn't right with the GPS wiring. You wire TX and RX to an available UART, not to SCL and SDA. You would wiring up SCL and SDA if your GPS module has a compass and your don't cross them over.

[@dronecamps]

It’s working fine.

[@matthewkelley4477]

this video is horrible soldering and backwards building

[@21purebred]

I was just wondering if it would be possible for you to update the parts list for this build because i was very interested in trying out this build but the links for the FC and the ESC are not good anymore and says that the site no longer carries them. I'd really appreciate it, thank you.

[@Theextremepessimist]

Getfpv has good customer service. I’m new and I have used them.

[@dragginalinecatfishing4719]

The flight controller that you listed is no longer in stock. Do you have any other that you can recommend for this build.

[@Bollibompa]

Why don't you flux the esc pads?

[@Bollibompa]

Also, what is the kV of the motors?

[@spacemandaxx]

Any flight video on this 10" quad build?

[@TomFYouTube]

Hat flight time are you getting eith the big pack? I'd like 30minutes or more. Thanks

[@1982travm]

Did you ever get this in the air?

[@Phillyfpv]

I noticed your using a 65a esc with 65.54a peak current motors? I am planning a ten inch build but I was under the impression the esc needs to be a higher rating than the motors?

[@evilynz]

you can also edit tx and rx input information on your remotes tbs lua settings.

[@ShadowOppsRC]

Thanks for sharing man! Drone camps door bell I mean dog bark in background!

[@dronecamps]

Always a dog, chicken, mowers, or children noises around here 🤣

[@ShadowOppsRC]

@@dronecamps kids or dogs here! Sheep herding dogs that will kill chickens so no chickens!

[@jaghook]

hI, Can you tell me the electonic components and motors i would need for an 8 motor, ten inch two bladed drone for heavy lift. If you have a vid for this i would love to see it. but any tips would be good. You seem to be the only person on here that i can understand. And also i have these motors, would they be any good for what i want. very best regards Jim.

[@MountaineerFPV]

Always clean your tip.
That’s what she said…😂👍👍

[@dronecamps]

Always! 😂

[@MountaineerFPV]

@@dronecamps a beast!

[@marvinrainwater6526]

Do you have tune for the Rekon 10? I have built it but can’t make it fly great.

[@patrickpendergast898]

I’d like to see you convert this into a hexacopter like the flywoo venom H2.0 with the center motors mounted on the bottom as pushers.

[@dronecamps]

That would be wild. 🔥

[@KTHKUHNKK]

Excellent video super excellent. Keep up the good work Justin.

[@johnwalter6410]

Do you think xing 4214 660kv would be too big to use on a 10 frame with 11 inch props?

[@Mateo-wf1yz]

A question, can you use the O3 camera/tx and the DJI goggles 2 without this remote ID thing?
Im in Europe so no US rules here.

[@dronecamps]

Yeah

[@benleong2008]

Is the stock dji o3 antenna good enough for long range? Or is it better to replace with other antennas like iflight drones do?

[@genefoxgreenmountaindroning]

Thank you for the great build video.

[@dronecamps]

No problem 👍

[@shenanigans8apeach]

@dronecamps do you assist with builds? With compensation of coarse. Thanks

[@dronecamps]

We do yes. check out www.dronecamps.com

[@Picit13]

What KV motor are you using? A couple links are gone so had a question which flight controller and ESC that you used?

[@allanfulmer7468]

Curious if it's feasible to center mount a full bmpc 4k and mount battery underneath?

[@GromMolniya-vq7ko]

What motors are better for 10" propellers?

[@johncarold]

10in Really, I just finished my 7in Source one, and now we have a 10in quad. It's funny that I used almost the same electronics. F722, 50a ESC, Caddx Ratel starlight and AKK DVR 1200mw. Thanks for the build video. Looking forward to the video on the flight

[@dronecamps]

Awesome. I’d love to see that build. Ratel is my fav. Let me know if you get a 10” frame to build

[@cch201992]

Epic 🤌🏼

[@rcrc2340]

Got any flight videos with this monster? I imagine getting a smooth tune with a big rekon frame (not known for their stability) will be very difficult. I've been debating about going for the XL10 just to take advantage of the (hopefully) better tune and more rigid frame.

[@shenanigans8apeach]

Can you please start including total cost in these builds?

[@user-fo6jx9tr6x]

Scl, sda pads are not for magnetometer?

[@fanatic_joka]

Any news on flying this beast?
Are Props in View ?

[@Shooting-Up]

Isn’t that basically a flying guillotine? 😂

[@CarolinaAirshots]

That's a big one for sure. You made the build seem simple, good job ! Did someone steal your DC Hat ?

[@duanebowman9595]

Would this fram handle 5008 340kv just for Long Range For video not Pushing it?? Have 4 from another build.

[@dronecamps]

Maybe the arms are 8-9mm I think.

[@duanebowman9595]

@@dronecamps Thinking this could be a good cinadrome with these motors and extend the time. Thank You

[@crackup007]

Great! 😁👍

[@dilbertmcfly5986]

Typically, you want to show good job soldering and know what you are talking about when you make a video for youtube...
At the very least, use some flux.

[@dronecamps]

Yep yep ✅

[@KTHKUHNKK]

Have you ever built a hexacopter ?
I still love my Yuneec TY H 480
Keith

[@dronecamps]

Yeah the Dji flame wheel

[@dronecamps]

I still have a Yuneec H

[@jayzsen]

Please relink the controller and ESC's. Thanks!

[@babyzfpv1234]

You have hair! And it looks way better than mine lol.

[@dronecamps]

I got lucky 🍀

[@Rcschim]

once again - it's a bluescreen effect - and at the same time it isn't ;) quite a paradoxon ;)

[@johnwalter6410]

You should also be putting a thin fiber or metal washer on those motor mount screws. The bolt head is too small and put pressure on that carbon fiber. It could crack the arm under high torque,. Just saying. Obviously you know what you are doing. But you dont know everything just l;ike zi dont know everything, Im sure you know things I dont. But you should putn a thin washeer or shim on there.

[@dronecamps]

I do “get” and know that. Sometimes things slide by. Very good point my friend thanks.☝🏻👍🏻

[@johnwalter6410]

@@dronecampsoh you usually do. You missed it. Ok. Ha. I figured. You never know. I've seen dudes who have been flying and building for 12 yrs and they still don't know that. I am by no means no at all you know way more than I do let's just say that upfront. Just figured I'd mention just in case.

[@danialfpv]

My hairline is higher than yours 😭😭😭

[@j.c.m5168]

Any reason not to go with diversity and run 2 antennas?