Make rear seats fold down. 4th Gen Ram rear seat mod
Вставка
- Опубліковано 16 жов 2023
- Want your rear seats to be able to fold down on your 4th Gen Ram Crew cab pickup? Check out this video on a solution for this problem. Disclaimer ,I am not responsible or liable if you screw up this mod and it doesn't work on your year, make, model of truck. Proceed at your own discretion.
With that said its a fairly straight forward mod and works great allowing access to behind the seat storage etc. - Авто та транспорт
THANK YOU!!!! Everyone showing off flipping it down, thanks for sharing the process. I’ve just been pulling only seat back trying to get it come down
Welcome! I'm glad it helped out.
Doing this tomorrow. Thanks brother!!
Welcome! Glad to help!
Thanks bud got a 2020 warlock same problem tackling tomorrow morning
It goes pretty easily. Just be careful cutting so you dont hit the seats and try to leave a little of the white plastic if possible, otherwise it may rattle a tad and then you just have to put a little electrical tape around the metal to get that to stop. Its easy though.
The other seat i got rid of too much of the white plastic compared to the one i showed in the video. So it made noise if you pulled it forward and back. All i did was put some electrical tape around the bracket i cut (shown in video) and then that went away. (Easy fix)
For anybody watching. At the bottom of the plastic after you cut the metal and plastic. Cut a bit off at a 45° angle, the plastic won't get caught
How’d it go with your 2020 warlock? I have a 22 and my seats don’t tilt up when you raise the bench… wonder if this will not work on the 5th gens
Yup doing this today. I have 2 subs under the seat i need a spot for a rifle...
It worked buddy I have the full back bench seat and did exactly what you did and I now have a storage area! I also had to cut the plastic off. It's got movement now, hopefully it doesn't clunk to bad
That plastic ends up breaking over time anyways. I just remove it and then put some 5/16" fuel hose with a couple zip ties on the bar hoop on the back of the cab. you might have to trim a little more of the bottom of the metal tab on the seat to clear the fuel hose, but just go slow until it just clears and you'll have plenty still grabbing when the back drops back down. and no rattling! I started with the electrical tape...but it wears out pretty quickly from driving and operating the seat.
Good idea
When it’s fold up doe the seat fall down when you break?
You mean BRAKE?
When you have the base of the seat folded all the way up, do they still stay in the up position locked like original also after this mod? Or will they fall forward when folded all the way up? Thank you!
Damn bud you seem out of breath lol.
@@bg31282 Yeah, working on getting back in shape. Hit the weight room for 3hrs yesterday!